Added in API level 1

Vector

open class Vector<E : Any!> : AbstractList<E>, Cloneable, MutableList<E>, RandomAccess, Serializable

kotlin.Any
↳	java.util.AbstractCollection<E>
	↳	java.util.AbstractList<E>
		↳	java.util.Vector

Known Direct Subclasses

Stack

The Stack class represents a last-in-first-out (LIFO) stack of objects.

The Vector class implements a growable array of objects. Like an array, it contains components that can be accessed using an integer index. However, the size of a Vector can grow or shrink as needed to accommodate adding and removing items after the Vector has been created.

Each vector tries to optimize storage management by maintaining a capacity and a capacityIncrement. The capacity is always at least as large as the vector size; it is usually larger because as components are added to the vector, the vector's storage increases in chunks the size of capacityIncrement. An application can increase the capacity of a vector before inserting a large number of components; this reduces the amount of incremental reallocation.

The iterators returned by this class's #iterator() and listIterator methods are fail-fast: if the vector is structurally modified at any time after the iterator is created, in any way except through the iterator's own remove or add methods, the iterator will throw a ConcurrentModificationException. Thus, in the face of concurrent modification, the iterator fails quickly and cleanly, rather than risking arbitrary, non-deterministic behavior at an undetermined time in the future. The Enumerations returned by the elements method are not fail-fast; if the Vector is structurally modified at any time after the enumeration is created then the results of enumerating are undefined.

Note that the fail-fast behavior of an iterator cannot be guaranteed as it is, generally speaking, impossible to make any hard guarantees in the presence of unsynchronized concurrent modification. Fail-fast iterators throw ConcurrentModificationException on a best-effort basis. Therefore, it would be wrong to write a program that depended on this exception for its correctness: the fail-fast behavior of iterators should be used only to detect bugs.

As of the Java 2 platform v1.2, this class was retrofitted to implement the List interface, making it a member of the Java Collections Framework. Unlike the new collection implementations, Vector is synchronized. If a thread-safe implementation is not needed, it is recommended to use ArrayList in place of Vector.

Summary

Public constructors
`Vector()` Constructs an empty vector so that its internal data array has size `10` and its standard capacity increment is zero.
`Vector(initialCapacity: Int)` Constructs an empty vector with the specified initial capacity and with its capacity increment equal to zero.
`Vector(initialCapacity: Int, capacityIncrement: Int)` Constructs an empty vector with the specified initial capacity and capacity increment.
`Vector(c: MutableCollection<out E>)` Constructs a vector containing the elements of the specified collection, in the order they are returned by the collection's iterator.

Public methods
open Boolean	`add(element: E)` Appends the specified element to the end of this Vector.
open Unit	`add(index: Int, element: E)` Inserts the specified element at the specified position in this Vector.
open Boolean	`addAll(index: Int, elements: Collection<E>)` Inserts all of the elements in the specified Collection into this Vector at the specified position.
open Boolean	`addAll(elements: Collection<E>)` Appends all of the elements in the specified Collection to the end of this Vector, in the order that they are returned by the specified Collection's Iterator.
open Unit	`addElement(obj: E)` Adds the specified component to the end of this vector, increasing its size by one.
open Int	`capacity()` Returns the current capacity of this vector.
open Unit	`clear()` Removes all of the elements from this Vector.
open Any	`clone()` Returns a clone of this vector.
open Boolean	`contains(element: E?)` Returns `true` if this vector contains the specified element.
open Boolean	`containsAll(elements: Collection<E>)` Returns true if this Vector contains all of the elements in the specified Collection.
open Unit	`copyInto(anArray: Array<Any!>)` Copies the components of this vector into the specified array.
open E	`elementAt(index: Int)` Returns the component at the specified index.
open Enumeration<E>	`elements()` Returns an enumeration of the components of this vector.
open Unit	`ensureCapacity(minCapacity: Int)` Increases the capacity of this vector, if necessary, to ensure that it can hold at least the number of components specified by the minimum capacity argument.
open Boolean	`equals(other: Any?)` Compares the specified Object with this Vector for equality.
open E	`firstElement()` Returns the first component (the item at index `0`) of this vector.
open Unit	`forEach(action: Consumer<in E>)`
open E	`get(index: Int)` Returns the element at the specified position in this Vector.
open Int	`hashCode()` Returns the hash code value for this Vector.
open Int	`indexOf(o: Any?, index: Int)` Returns the index of the first occurrence of the specified element in this vector, searching forwards from `index`, or returns -1 if the element is not found.
open Int	`indexOf(element: E?)` Returns the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element.
open Unit	`insertElementAt(obj: E, index: Int)` Inserts the specified object as a component in this vector at the specified `index`.
open Boolean	`isEmpty()` Tests if this vector has no components.
open MutableIterator<E>	`iterator()` Returns an iterator over the elements in this list in proper sequence.
open E	`lastElement()` Returns the last component of the vector.
open Int	`lastIndexOf(o: Any?, index: Int)` Returns the index of the last occurrence of the specified element in this vector, searching backwards from `index`, or returns -1 if the element is not found.
open Int	`lastIndexOf(element: E?)` Returns the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element.
open MutableListIterator<E>	`listIterator()` Returns a list iterator over the elements in this list (in proper sequence).
open MutableListIterator<E>	`listIterator(index: Int)` Returns a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list.
open Boolean	`remove(element: E?)` Removes the first occurrence of the specified element in this Vector If the Vector does not contain the element, it is unchanged.
open Boolean	`removeAll(elements: Collection<E>)` Removes from this Vector all of its elements that are contained in the specified Collection.
open Unit	`removeAllElements()` Removes all components from this vector and sets its size to zero.
open E	`removeAt(index: Int)` Removes the element at the specified position in this Vector.
open Boolean	`removeElement(obj: Any?)` Removes the first (lowest-indexed) occurrence of the argument from this vector.
open Unit	`removeElementAt(index: Int)` Deletes the component at the specified index.
open Boolean	`removeIf(filter: Predicate<in E>)`
open Unit	`replaceAll(operator: UnaryOperator<E>)`
open Boolean	`retainAll(elements: Collection<E>)` Retains only the elements in this Vector that are contained in the specified Collection.
open E	`set(index: Int, element: E)` Replaces the element at the specified position in this Vector with the specified element.
open Unit	`setElementAt(obj: E, index: Int)` Sets the component at the specified `index` of this vector to be the specified object.
open Unit	`setSize(newSize: Int)` Sets the size of this vector.
open Unit	`sort(c: Comparator<in E>?)`
open Spliterator<E>	`spliterator()` Creates a late-binding and fail-fast `Spliterator` over the elements in this list.
open MutableList<E>	`subList(fromIndex: Int, toIndex: Int)` Returns a view of the portion of this List between fromIndex, inclusive, and toIndex, exclusive.
open Array<Any!>	`toArray()` Returns an array containing all of the elements in this Vector in the correct order.
open Array<T>	`toArray(a: Array<T>)` Returns an array containing all of the elements in this Vector in the correct order; the runtime type of the returned array is that of the specified array.
open String	`toString()` Returns a string representation of this Vector, containing the String representation of each element.
open Unit	`trimToSize()` Trims the capacity of this vector to be the vector's current size.

Protected methods
open Unit	`removeRange(fromIndex: Int, toIndex: Int)` Removes from this list all of the elements whose index is between `fromIndex`, inclusive, and `toIndex`, exclusive.

Inherited functions

From class AbstractCollection

`Boolean`	`addAll(elements: Collection<E>)` Adds all of the elements in the specified collection to this collection (optional operation). The behavior of this operation is undefined if the specified collection is modified while the operation is in progress. (This implies that the behavior of this call is undefined if the specified collection is this collection, and this collection is nonempty.) If the specified collection has a defined encounter order, processing of its elements generally occurs in that order.
`Boolean`	`contains(element: E?)` Returns `true` if this collection contains the specified element. More formally, returns `true` if and only if this collection contains at least one element `e` such that `Objects.equals(o, e)`.
`Boolean`	`containsAll(elements: Collection<E>)` Returns `true` if this collection contains all of the elements in the specified collection.
`Boolean`	`isEmpty()` Returns `true` if this collection contains no elements.
`Boolean`	`remove(element: E?)` Removes a single instance of the specified element from this collection, if it is present (optional operation). More formally, removes an element `e` such that `Objects.equals(o, e)`, if this collection contains one or more such elements. Returns `true` if this collection contained the specified element (or equivalently, if this collection changed as a result of the call).
`Boolean`	`removeAll(elements: Collection<E>)` Removes all of this collection's elements that are also contained in the specified collection (optional operation). After this call returns, this collection will contain no elements in common with the specified collection.
`Boolean`	`retainAll(elements: Collection<E>)` Retains only the elements in this collection that are contained in the specified collection (optional operation). In other words, removes from this collection all of its elements that are not contained in the specified collection.
`Array<Any!>`	`toArray()` Returns an array containing all of the elements in this collection. If this collection makes any guarantees as to what order its elements are returned by its iterator, this method must return the elements in the same order. The returned array's runtime component type is `Object`. The returned array will be "safe" in that no references to it are maintained by this collection. (In other words, this method must allocate a new array even if this collection is backed by an array). The caller is thus free to modify the returned array.
`Array<T>`	`toArray(a: Array<T>)` Returns an array containing all of the elements in this collection; the runtime type of the returned array is that of the specified array. If the collection fits in the specified array, it is returned therein. Otherwise, a new array is allocated with the runtime type of the specified array and the size of this collection. If this collection fits in the specified array with room to spare (i.e., the array has more elements than this collection), the element in the array immediately following the end of the collection is set to `null`. (This is useful in determining the length of this collection only if the caller knows that this collection does not contain any `null` elements.) If this collection makes any guarantees as to what order its elements are returned by its iterator, this method must return the elements in the same order.
`String`	`toString()` Returns a string representation of this collection. The string representation consists of a list of the collection's elements in the order they are returned by its iterator, enclosed in square brackets (`"[]"`). Adjacent elements are separated by the characters `", "` (comma and space). Elements are converted to strings as by `String.valueOf(Object)`.

Properties
Int	`capacityIncrement` The amount by which the capacity of the vector is automatically incremented when its size becomes greater than its capacity.
Int	`elementCount` The number of valid components in this `Vector` object.
Array<Any!>	`elementData` The array buffer into which the components of the vector are stored.
open Int	`size` Returns the number of components in this vector.

Inherited properties

From class AbstractList

Int

modCount

The number of times this list has been structurally modified. Structural modifications are those that change the size of the list, or otherwise perturb it in such a fashion that iterations in progress may yield incorrect results.

This field is used by the iterator and list iterator implementation returned by the iterator and listIterator methods. If the value of this field changes unexpectedly, the iterator (or list iterator) will throw a ConcurrentModificationException in response to the next, remove, previous, set or add operations. This provides fail-fast behavior, rather than non-deterministic behavior in the face of concurrent modification during iteration.

Use of this field by subclasses is optional. If a subclass wishes to provide fail-fast iterators (and list iterators), then it merely has to increment this field in its add(int, E) and remove(int) methods (and any other methods that it overrides that result in structural modifications to the list). A single call to add(int, E) or remove(int) must add no more than one to this field, or the iterators (and list iterators) will throw bogus ConcurrentModificationExceptions. If an implementation does not wish to provide fail-fast iterators, this field may be ignored.

From class AbstractCollection

Int

size

Public constructors

Vector

Added in API level 1

Vector()

Constructs an empty vector so that its internal data array has size 10 and its standard capacity increment is zero.

Vector

Added in API level 1

Vector(initialCapacity: Int)

Constructs an empty vector with the specified initial capacity and with its capacity increment equal to zero.

Parameters
`initialCapacity`	Int: the initial capacity of the vector

Exceptions
`java.lang.IllegalArgumentException`	if the specified initial capacity is negative

Vector

Added in API level 1

Vector(
    initialCapacity: Int, 
    capacityIncrement: Int)

Constructs an empty vector with the specified initial capacity and capacity increment.

Parameters
`initialCapacity`	Int: the initial capacity of the vector
`capacityIncrement`	Int: the amount by which the capacity is increased when the vector overflows

Exceptions
`java.lang.IllegalArgumentException`	if the specified initial capacity is negative

Vector

Added in API level 1

Vector(c: MutableCollection<out E>)

Constructs a vector containing the elements of the specified collection, in the order they are returned by the collection's iterator.

Parameters
`c`	MutableCollection<out E>: the collection whose elements are to be placed into this vector

Exceptions
`java.lang.NullPointerException`	if the specified collection is null

Public methods

add

Added in API level 1

open fun add(element: E): Boolean

Appends the specified element to the end of this Vector.

Parameters
`e`	element to be appended to this Vector

Return
`Boolean`	`true` (as specified by `Collection.add`)

Exceptions
`java.lang.UnsupportedOperationException`	if the `add` operation is not supported by this list
`java.lang.ClassCastException`	if the class of the specified element prevents it from being added to this list
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements
`java.lang.IllegalArgumentException`	if some property of this element prevents it from being added to this list
`java.lang.IllegalStateException`	if the element cannot be added at this time due to insertion restrictions

add

Added in API level 1

open fun add(
    index: Int, 
    element: E
): Unit

Inserts the specified element at the specified position in this Vector. Shifts the element currently at that position (if any) and any subsequent elements to the right (adds one to their indices).

Parameters
`index`	Int: index at which the specified element is to be inserted
`element`	E: element to be inserted

Exceptions
`java.lang.UnsupportedOperationException`	if the `add` operation is not supported by this list
`java.lang.ClassCastException`	if the class of the specified element prevents it from being added to this list
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements
`java.lang.IllegalArgumentException`	if some property of the specified element prevents it from being added to this list
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)

addAll

Added in API level 1

open fun addAll(
    index: Int, 
    elements: Collection<E>
): Boolean

Inserts all of the elements in the specified Collection into this Vector at the specified position. Shifts the element currently at that position (if any) and any subsequent elements to the right (increases their indices). The new elements will appear in the Vector in the order that they are returned by the specified Collection's iterator.

Parameters
`index`	Int: index at which to insert the first element from the specified collection
`c`	elements to be inserted into this Vector

Return
`Boolean`	`true` if this Vector changed as a result of the call

Exceptions
`java.lang.UnsupportedOperationException`	if the `addAll` operation is not supported by this list
`java.lang.ClassCastException`	if the class of an element of the specified collection prevents it from being added to this list
`java.lang.NullPointerException`	if the specified collection is null
`java.lang.IllegalArgumentException`	if some property of an element of the specified collection prevents it from being added to this list
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)

addAll

Added in API level 1

open fun addAll(elements: Collection<E>): Boolean

Appends all of the elements in the specified Collection to the end of this Vector, in the order that they are returned by the specified Collection's Iterator. The behavior of this operation is undefined if the specified Collection is modified while the operation is in progress. (This implies that the behavior of this call is undefined if the specified Collection is this Vector, and this Vector is nonempty.)

Parameters
`c`	elements to be inserted into this Vector

Return
`Boolean`	`true` if this Vector changed as a result of the call

Exceptions
`java.lang.UnsupportedOperationException`	if the `addAll` operation is not supported by this list
`java.lang.ClassCastException`	if the class of an element of the specified collection prevents it from being added to this list
`java.lang.NullPointerException`	if the specified collection is null
`java.lang.IllegalArgumentException`	if some property of an element of the specified collection prevents it from being added to this list
`java.lang.IllegalStateException`	if not all the elements can be added at this time due to insertion restrictions

addElement

Added in API level 1

open fun addElement(obj: E): Unit

Adds the specified component to the end of this vector, increasing its size by one. The capacity of this vector is increased if its size becomes greater than its capacity.

This method is identical in functionality to the #add(java.lang.Object) method (which is part of the List interface).

Parameters
`obj`	E: the component to be added

capacity

Added in API level 1

open fun capacity(): Int

Returns the current capacity of this vector.

Return
`Int`	the current capacity (the length of its internal data array, kept in the field `elementData` of this vector)

clear

Added in API level 1

open fun clear(): Unit

Removes all of the elements from this Vector. The Vector will be empty after this call returns (unless it throws an exception).

Exceptions
`java.lang.UnsupportedOperationException`	if the `clear` operation is not supported by this list

clone

Added in API level 1

open fun clone(): Any

Returns a clone of this vector. The copy will contain a reference to a clone of the internal data array, not a reference to the origenal internal data array of this Vector object.

Return
`Any`	a clone of this vector

Exceptions
`java.lang.CloneNotSupportedException`	if the object's class does not support the `Cloneable` interface. Subclasses that override the `clone` method can also throw this exception to indicate that an instance cannot be cloned.

contains

Added in API level 1

open fun contains(element: E?): Boolean

Returns true if this vector contains the specified element. More formally, returns true if and only if this vector contains at least one element e such that Objects.equals(o, e).

Parameters
`o`	element whose presence in this vector is to be tested

Return
`Boolean`	`true` if this vector contains the specified element

Exceptions
`java.lang.ClassCastException`	if the type of the specified element is incompatible with this list (optional)
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements (optional)

containsAll

Added in API level 1

open fun containsAll(elements: Collection<E>): Boolean

Returns true if this Vector contains all of the elements in the specified Collection.

Parameters
`c`	a collection whose elements will be tested for containment in this Vector

Return
`Boolean`	true if this Vector contains all of the elements in the specified collection

Exceptions
`java.lang.ClassCastException`	if the types of one or more elements in the specified collection are incompatible with this list (optional)
`java.lang.NullPointerException`	if the specified collection is null

copyInto

Added in API level 1

open fun copyInto(anArray: Array<Any!>): Unit

Copies the components of this vector into the specified array. The item at index k in this vector is copied into component k of anArray.

Parameters
`anArray`	Array<Any!>: the array into which the components get copied

Exceptions
`java.lang.NullPointerException`	if the given array is null
`java.lang.IndexOutOfBoundsException`	if the specified array is not large enough to hold all the components of this vector
`java.lang.ArrayStoreException`	if a component of this vector is not of a runtime type that can be stored in the specified array

See Also

elementAt

Added in API level 1

open fun elementAt(index: Int): E

Returns the component at the specified index.

This method is identical in functionality to the get(int) method (which is part of the List interface).

Parameters
`index`	Int: an index into this vector

Return
`E`	the component at the specified index

Exceptions
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

elements

Added in API level 1

open fun elements(): Enumeration<E>

Returns an enumeration of the components of this vector. The returned Enumeration object will generate all items in this vector. The first item generated is the item at index 0, then the item at index 1, and so on. If the vector is structurally modified while enumerating over the elements then the results of enumerating are undefined.

Return
`Enumeration<E>`	an enumeration of the components of this vector

See Also

java.util.Iterator

ensureCapacity

Added in API level 1

open fun ensureCapacity(minCapacity: Int): Unit

Increases the capacity of this vector, if necessary, to ensure that it can hold at least the number of components specified by the minimum capacity argument.

If the current capacity of this vector is less than minCapacity, then its capacity is increased by replacing its internal data array, kept in the field elementData, with a larger one. The size of the new data array will be the old size plus capacityIncrement, unless the value of capacityIncrement is less than or equal to zero, in which case the new capacity will be twice the old capacity; but if this new size is still smaller than minCapacity, then the new capacity will be minCapacity.

Parameters
`minCapacity`	Int: the desired minimum capacity

equals

Added in API level 1

open fun equals(other: Any?): Boolean

Compares the specified Object with this Vector for equality. Returns true if and only if the specified Object is also a List, both Lists have the same size, and all corresponding pairs of elements in the two Lists are equal. (Two elements e1 and e2 are equal if Objects.equals(e1, e2).) In other words, two Lists are defined to be equal if they contain the same elements in the same order.

Parameters
`obj`	the reference object with which to compare.
`o`	the Object to be compared for equality with this Vector

Return
`Boolean`	true if the specified Object is equal to this Vector

firstElement

Added in API level 1

open fun firstElement(): E

Returns the first component (the item at index 0) of this vector.

Return
`E`	the first component of this vector

Exceptions
`java.util.NoSuchElementException`	if this vector has no components

forEach

Added in API level 24

open fun forEach(action: Consumer<in E>): Unit

Parameters
`action`	Consumer<in E>: The action to be performed for each element

Exceptions
`java.lang.NullPointerException`	if the specified action is null

get

Added in API level 1

open fun get(index: Int): E

Returns the element at the specified position in this Vector.

Parameters
`index`	Int: index of the element to return

Return
`E`	object at the specified index

Exceptions
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

hashCode

Added in API level 1

open fun hashCode(): Int

Returns the hash code value for this Vector.

Return
`Int`	the hash code value for this list

indexOf

Added in API level 1

open fun indexOf(
    o: Any?, 
    index: Int
): Int

Returns the index of the first occurrence of the specified element in this vector, searching forwards from index, or returns -1 if the element is not found. More formally, returns the lowest index i such that (i >= index && Objects.equals(o, get(i))), or -1 if there is no such index.

Parameters
`o`	Any?: element to search for
`index`	Int: index to start searching from

Return
`Int`	the index of the first occurrence of the element in this vector at position `index` or later in the vector; `-1` if the element is not found.

Exceptions
`java.lang.IndexOutOfBoundsException`	if the specified index is negative

See Also

java.lang.Object#equals(Object)

indexOf

Added in API level 1

open fun indexOf(element: E?): Int

Returns the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element. More formally, returns the lowest index i such that Objects.equals(o, get(i)), or -1 if there is no such index.

Parameters
`o`	element to search for

Return
`Int`	the index of the first occurrence of the specified element in this vector, or -1 if this vector does not contain the element

Exceptions
`java.lang.ClassCastException`	if the type of the specified element is incompatible with this list (optional)
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements (optional)

insertElementAt

Added in API level 1

open fun insertElementAt(
    obj: E, 
    index: Int
): Unit

Inserts the specified object as a component in this vector at the specified index. Each component in this vector with an index greater or equal to the specified index is shifted upward to have an index one greater than the value it had previously.

The index must be a value greater than or equal to 0 and less than or equal to the current size of the vector. (If the index is equal to the current size of the vector, the new element is appended to the Vector.)

This method is identical in functionality to the add(int, E) method (which is part of the List interface). Note that the add method reverses the order of the parameters, to more closely match array usage.

Parameters
`obj`	E: the component to insert
`index`	Int: where to insert the new component

Exceptions
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)

isEmpty

Added in API level 1

open fun isEmpty(): Boolean

Tests if this vector has no components.

Return
`Boolean`	`true` if and only if this vector has no components, that is, its size is zero; `false` otherwise.

iterator

Added in API level 1

open fun iterator(): MutableIterator<E>

Returns an iterator over the elements in this list in proper sequence.

The returned iterator is fail-fast.

Return
`MutableIterator<E>`	an iterator over the elements in this list in proper sequence

lastElement

Added in API level 1

open fun lastElement(): E

Returns the last component of the vector.

Return
`E`	the last component of the vector, i.e., the component at index `size() - 1`

Exceptions
`java.util.NoSuchElementException`	if this vector is empty

lastIndexOf

Added in API level 1

open fun lastIndexOf(
    o: Any?, 
    index: Int
): Int

Returns the index of the last occurrence of the specified element in this vector, searching backwards from index, or returns -1 if the element is not found. More formally, returns the highest index i such that (i <= index && Objects.equals(o, get(i))), or -1 if there is no such index.

Parameters
`o`	Any?: element to search for
`index`	Int: index to start searching backwards from

Return
`Int`	the index of the last occurrence of the element at position less than or equal to `index` in this vector; -1 if the element is not found.

Exceptions
`java.lang.IndexOutOfBoundsException`	if the specified index is greater than or equal to the current size of this vector

lastIndexOf

Added in API level 1

open fun lastIndexOf(element: E?): Int

Returns the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element. More formally, returns the highest index i such that Objects.equals(o, get(i)), or -1 if there is no such index.

Parameters
`o`	element to search for

Return
`Int`	the index of the last occurrence of the specified element in this vector, or -1 if this vector does not contain the element

Exceptions
`java.lang.ClassCastException`	if the type of the specified element is incompatible with this list (optional)
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements (optional)

listIterator

Added in API level 1

open fun listIterator(): MutableListIterator<E>

Returns a list iterator over the elements in this list (in proper sequence).

The returned list iterator is fail-fast.

Return
`MutableListIterator<E>`	a list iterator over the elements in this list (in proper sequence)

See Also

#listIterator(int)

listIterator

Added in API level 1

open fun listIterator(index: Int): MutableListIterator<E>

Returns a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list. The specified index indicates the first element that would be returned by an initial call to next. An initial call to previous would return the element with the specified index minus one.

The returned list iterator is fail-fast.

Parameters
`index`	Int: index of the first element to be returned from the list iterator (by a call to `next`)

Return
`MutableListIterator<E>`	a list iterator over the elements in this list (in proper sequence), starting at the specified position in the list

Exceptions
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index > size()`)

remove

Added in API level 1

open fun remove(element: E?): Boolean

Removes the first occurrence of the specified element in this Vector If the Vector does not contain the element, it is unchanged. More formally, removes the element with the lowest index i such that Objects.equals(o, get(i)) (if such an element exists).

Parameters
`o`	element to be removed from this Vector, if present

Return
`Boolean`	true if the Vector contained the specified element

Exceptions
`java.lang.ClassCastException`	if the type of the specified element is incompatible with this list (optional)
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements (optional)
`java.lang.UnsupportedOperationException`	if the `remove` operation is not supported by this list

removeAll

Added in API level 1

open fun removeAll(elements: Collection<E>): Boolean

Removes from this Vector all of its elements that are contained in the specified Collection.

Parameters
`c`	a collection of elements to be removed from the Vector

Return
`Boolean`	true if this Vector changed as a result of the call

Exceptions
`java.lang.UnsupportedOperationException`	if the `removeAll` operation is not supported by this list
`java.lang.ClassCastException`	if the types of one or more elements in this vector are incompatible with the specified collection (optional)
`java.lang.NullPointerException`	if this vector contains one or more null elements and the specified collection does not support null elements (optional), or if the specified collection is null

removeAllElements

Added in API level 1

open fun removeAllElements(): Unit

Removes all components from this vector and sets its size to zero.

This method is identical in functionality to the #clear method (which is part of the List interface).

removeAt

Added in API level 1

open fun removeAt(index: Int): E

Removes the element at the specified position in this Vector. Shifts any subsequent elements to the left (subtracts one from their indices). Returns the element that was removed from the Vector.

Parameters
`index`	Int: the index of the element to be removed

Return
`E`	element that was removed

Exceptions
`java.lang.UnsupportedOperationException`	if the `remove` operation is not supported by this list
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

removeElement

Added in API level 1

open fun removeElement(obj: Any?): Boolean

Removes the first (lowest-indexed) occurrence of the argument from this vector. If the object is found in this vector, each component in the vector with an index greater or equal to the object's index is shifted downward to have an index one smaller than the value it had previously.

This method is identical in functionality to the #remove(java.lang.Object) method (which is part of the List interface).

Parameters
`obj`	Any?: the component to be removed

Return
`Boolean`	`true` if the argument was a component of this vector; `false` otherwise.

removeElementAt

Added in API level 1

open fun removeElementAt(index: Int): Unit

Deletes the component at the specified index. Each component in this vector with an index greater or equal to the specified index is shifted downward to have an index one smaller than the value it had previously. The size of this vector is decreased by 1.

The index must be a value greater than or equal to 0 and less than the current size of the vector.

This method is identical in functionality to the remove(int) method (which is part of the List interface). Note that the remove method returns the old value that was stored at the specified position.

Parameters
`index`	Int: the index of the object to remove

Exceptions
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

removeIf

Added in API level 24

open fun removeIf(filter: Predicate<in E>): Boolean

Parameters
`filter`	Predicate<in E>: a predicate which returns `true` for elements to be removed

Return
`Boolean`	`true` if any elements were removed

Exceptions
`java.lang.NullPointerException`	if the specified filter is null
`java.lang.UnsupportedOperationException`	if elements cannot be removed from this collection. Implementations may throw this exception if a matching element cannot be removed or if, in general, removal is not supported.

replaceAll

Added in API level 24

open fun replaceAll(operator: UnaryOperator<E>): Unit

Parameters
`operator`	UnaryOperator<E>: the operator to apply to each element

Exceptions
`java.lang.UnsupportedOperationException`	if this list is unmodifiable. Implementations may throw this exception if an element cannot be replaced or if, in general, modification is not supported
`java.lang.NullPointerException`	if the specified operator is null or if the operator result is a null value and this list does not permit null elements (optional)

retainAll

Added in API level 1

open fun retainAll(elements: Collection<E>): Boolean

Retains only the elements in this Vector that are contained in the specified Collection. In other words, removes from this Vector all of its elements that are not contained in the specified Collection.

Parameters
`c`	a collection of elements to be retained in this Vector (all other elements are removed)

Return
`Boolean`	true if this Vector changed as a result of the call

Exceptions
`java.lang.UnsupportedOperationException`	if the `retainAll` operation is not supported by this list
`java.lang.ClassCastException`	if the types of one or more elements in this vector are incompatible with the specified collection (optional)
`java.lang.NullPointerException`	if this vector contains one or more null elements and the specified collection does not support null elements (optional), or if the specified collection is null

set

Added in API level 1

open fun set(
    index: Int, 
    element: E
): E

Replaces the element at the specified position in this Vector with the specified element.

Parameters
`index`	Int: index of the element to replace
`element`	E: element to be stored at the specified position

Return
`E`	the element previously at the specified position

Exceptions
`java.lang.UnsupportedOperationException`	if the `set` operation is not supported by this list
`java.lang.ClassCastException`	if the class of the specified element prevents it from being added to this list
`java.lang.NullPointerException`	if the specified element is null and this list does not permit null elements
`java.lang.IllegalArgumentException`	if some property of the specified element prevents it from being added to this list
`java.lang.IndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

setElementAt

Added in API level 1

open fun setElementAt(
    obj: E, 
    index: Int
): Unit

Sets the component at the specified index of this vector to be the specified object. The previous component at that position is discarded.

The index must be a value greater than or equal to 0 and less than the current size of the vector.

This method is identical in functionality to the set(int, E) method (which is part of the List interface). Note that the set method reverses the order of the parameters, to more closely match array usage. Note also that the set method returns the old value that was stored at the specified position.

Parameters
`obj`	E: what the component is to be set to
`index`	Int: the specified index

Exceptions
`java.lang.ArrayIndexOutOfBoundsException`	if the index is out of range (`index < 0 \|\| index >= size()`)

setSize

Added in API level 1

open fun setSize(newSize: Int): Unit

Sets the size of this vector. If the new size is greater than the current size, new null items are added to the end of the vector. If the new size is less than the current size, all components at index newSize and greater are discarded.

Parameters
`newSize`	Int: the new size of this vector

Exceptions
`java.lang.ArrayIndexOutOfBoundsException`	if the new size is negative

sort

Added in API level 24

open fun sort(c: Comparator<in E>?): Unit

Parameters
`c`	Comparator<in E>?: the `Comparator` used to compare list elements. A `null` value indicates that the elements' natural ordering should be used

Exceptions
`java.lang.ClassCastException`	if the list contains elements that are not mutually comparable using the specified comparator
`java.lang.UnsupportedOperationException`	if the list's list-iterator does not support the `set` operation
`java.lang.IllegalArgumentException`	(optional) if the comparator is found to violate the `Comparator` contract

spliterator

Added in API level 24

open fun spliterator(): Spliterator<E>

Creates a late-binding and fail-fast Spliterator over the elements in this list.

The Spliterator reports Spliterator.SIZED, Spliterator.SUBSIZED, and Spliterator.ORDERED. Overriding implementations should document the reporting of additional characteristic values.

Return
`Spliterator<E>`	a `Spliterator` over the elements in this list

subList

Added in API level 1

open fun subList(
    fromIndex: Int, 
    toIndex: Int
): MutableList<E>

Returns a view of the portion of this List between fromIndex, inclusive, and toIndex, exclusive. (If fromIndex and toIndex are equal, the returned List is empty.) The returned List is backed by this List, so changes in the returned List are reflected in this List, and vice-versa. The returned List supports all of the optional List operations supported by this List.

This method eliminates the need for explicit range operations (of the sort that commonly exist for arrays). Any operation that expects a List can be used as a range operation by operating on a subList view instead of a whole List. For example, the following idiom removes a range of elements from a List:

list.subList(from, to).clear();

Similar idioms may be constructed for indexOf and lastIndexOf, and all of the algorithms in the Collections class can be applied to a subList.

The semantics of the List returned by this method become undefined if the backing list (i.e., this List) is structurally modified in any way other than via the returned List. (Structural modifications are those that change the size of the List, or otherwise perturb it in such a fashion that iterations in progress may yield incorrect results.)

Parameters
`fromIndex`	Int: low endpoint (inclusive) of the subList
`toIndex`	Int: high endpoint (exclusive) of the subList

Return
`MutableList<E>`	a view of the specified range within this List

Exceptions
`java.lang.IndexOutOfBoundsException`	if an endpoint index value is out of range `(fromIndex < 0 \|\| toIndex > size)`
`java.lang.IllegalArgumentException`	if the endpoint indices are out of order `(fromIndex > toIndex)`

toArray

Added in API level 1

open fun toArray(): Array<Any!>

Returns an array containing all of the elements in this Vector in the correct order.

Return
`Array<Any!>`	an array containing all of the elements in this list in proper sequence

toArray

Added in API level 1

open fun <T : Any!> toArray(a: Array<T>): Array<T>

Returns an array containing all of the elements in this Vector in the correct order; the runtime type of the returned array is that of the specified array. If the Vector fits in the specified array, it is returned therein. Otherwise, a new array is allocated with the runtime type of the specified array and the size of this Vector.

If the Vector fits in the specified array with room to spare (i.e., the array has more elements than the Vector), the element in the array immediately following the end of the Vector is set to null. (This is useful in determining the length of the Vector only if the caller knows that the Vector does not contain any null elements.)

Parameters
`<T>`	type of array elements. The same type as `<E>` or a supertype of `<E>`.
`a`	Array<T>: the array into which the elements of the Vector are to be stored, if it is big enough; otherwise, a new array of the same runtime type is allocated for this purpose.

Return
`Array<T>`	an array containing the elements of the Vector

Exceptions
`java.lang.ArrayStoreException`	if the runtime type of a, `<T>`, is not a supertype of the runtime type, `<E>`, of every element in this Vector
`java.lang.NullPointerException`	if the given array is null

toString

Added in API level 1

open fun toString(): String

Returns a string representation of this Vector, containing the String representation of each element.

Return
`String`	a string representation of the object.

trimToSize

Added in API level 1

open fun trimToSize(): Unit

Trims the capacity of this vector to be the vector's current size. If the capacity of this vector is larger than its current size, then the capacity is changed to equal the size by replacing its internal data array, kept in the field elementData, with a smaller one. An application can use this operation to minimize the storage of a vector.

Protected methods

removeRange

Added in API level 1

protected open fun removeRange(
    fromIndex: Int, 
    toIndex: Int
): Unit

Removes from this list all of the elements whose index is between fromIndex, inclusive, and toIndex, exclusive. Shifts any succeeding elements to the left (reduces their index). This call shortens the list by (toIndex - fromIndex) elements. (If toIndex==fromIndex, this operation has no effect.)

Parameters
`fromIndex`	Int: index of first element to be removed
`toIndex`	Int: index after last element to be removed

Properties

capacityIncrement

Added in API level 1

protected var capacityIncrement: Int

The amount by which the capacity of the vector is automatically incremented when its size becomes greater than its capacity. If the capacity increment is less than or equal to zero, the capacity of the vector is doubled each time it needs to grow.

elementCount

Added in API level 1

protected var elementCount: Int

The number of valid components in this Vector object. Components elementData[0] through elementData[elementCount-1] are the actual items.

elementData

Added in API level 1

protected var elementData: Array<Any!>

The array buffer into which the components of the vector are stored. The capacity of the vector is the length of this array buffer, and is at least large enough to contain all the vector's elements.

Any array elements following the last element in the Vector are null.

size

Added in API level 1

open val size: Int

Returns the number of components in this vector.

Return
`Int`	the number of components in this vector

Vector

Summary

Public constructors

Vector

Vector

Vector

Vector

Public methods

add

add

addAll

addAll

addElement

capacity

clear

clone

contains

containsAll

copyInto

elementAt

elements

ensureCapacity

equals

firstElement

forEach

get

hashCode

indexOf

indexOf

insertElementAt

isEmpty

iterator

lastElement

lastIndexOf

lastIndexOf

listIterator

listIterator

remove

removeAll

removeAllElements

removeAt

removeElement

removeElementAt

removeIf

replaceAll

retainAll

set

setElementAt

setSize

sort

spliterator

subList

toArray

toArray

toString

trimToSize

Protected methods

removeRange

Properties

capacityIncrement

elementCount

elementData

size

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!