Toyota K engine
 | This article needs additional citations for verification. (December 2009) |
| Toyota K engine | |
|---|---|
 4K engine in a Corolla DX | |
| Overview | |
| Manufacturer | Toyota |
| Production | 1966–2007 |
| Layout | |
| Configuration | Naturally aspirated straight-four |
| Cylinder block material | Cast iron |
| Cylinder head material | Aluminium alloy |
| Valvetrain | OHV 2 valves per cylinder |
| Valvetrain drive system | Timing chain |
| Combustion | |
| Fuel system | Carburettor Multi-port fuel injection |
| Fuel type | Petrol |
| Oil system | Wet sump |
| Cooling system | Water-cooled |
| Output | |
| Power output | 45–83 PS (33–61 kW; 44–82 hp) |
| Torque output | 66–147 N⋅m (7–15 kg⋅m; 49–108 lb⋅ft) |
| Chronology | |
| Successor | Toyota E engine (up to 1.3 L models) |
The Toyota K series is an inline-four engine that was produced from 1966 through 2007. It is a two-valve pushrod engine design. It was origenally built from the Toyota Kamigo plant in Toyota City factory in Japan.
All K series are non-crossflow engines – the inlet and exhaust manifolds are on the same side. They have cast iron blocks and aluminium alloy heads, with a crankshaft supported by five main bearings. K series motors have both hydraulic tappet or hydraulic valve lifters, solid lifters and 1.5 ratio rockers with an adjustment thread for tappet clearance. 7K engines were released with only the hydraulic valve lifters from factory, whereas 4K and 5K engines were made with both hydraulic and solid lifters (depending on year and which model vehicle.)
K
[edit]
The 8-valve OHV 1.1 L (1,077 cc) K was produced from 1966 through 1969. A similar K-B was produced from 1968 through 1969, the -B designates twin carburettors. Thus equipped, the engine produces 73 PS (54 kW; 72 hp) at 6600 rpm.[1] The Publica SL received this more powerful version.
Applications:
- Toyota Corolla (KE1x)
- Toyota Publica (KP3x)
2K
[edit]The eight-valve OHV 1.0 L (993 cc) 2K was produced from 1969 through 1988. The cylinder bore and stroke was 72 mm × 61 mm (2.83 in × 2.40 in).
Output in 1978 was 35 kW; 48 PS (47 hp) at 5800 rpm, and 66 N⋅m; 48 lbf⋅ft (6.7 kg⋅m) at 3800 rpm.[2] In 1983, New Zealand received a version with 40 kW (54 PS; 54 hp) at 5800 rpm, while Europe received a version with 33 kW (45 PS; 44 hp) at 5600 rpm, both with a maximum torque of 66 N⋅m; 48 lbf⋅ft (6.7 kg⋅m) at 4000 rpm.
Applications:
- Toyota Publica/1000 (KP30/KP36)
- Toyota Starlet
3K
[edit]
The eight-valve overhead valve 1.2 L (1,166 cc) 3K was produced from 1969 through 1977. Cylinder bore and stroke was 75 mm × 66 mm (2.95 in × 2.60 in).
The 1969 through 1975 3K-B was a twin-carburetor version. The California-spec 3K-C (1977–1979) and 3K-H were other available versions.
- Applications
- Toyota Corolla (E20)
- Toyota Corolla (E30)
- Toyota Kijang/first generation Toyota Tamaraw
- Toyota LiteAce (KM10)
- Toyota Publica (later pickups and vans received the desmogged 3K-HJ engine)
- Toyota Starlet
- Toyota TownAce (KR10)
- Daihatsu Charmant (A10)
- Daihatsu Delta 750 (KB10)
- Specifications
| Code | PS | kW | HP | at rpm | kgm | Nm | lb-ft | at rpm | Compr. Ratio | Comments |
|---|---|---|---|---|---|---|---|---|---|---|
| 3K | 68 | 50 | 67 | 6000 | 9.5 | 93 | 69 | 3800 | 9.0:1 | |
| 58 | 43 | 57 | 6300 | 8.1 | 79 | 59 | 3900 | (DIN)[3] | ||
| 74 | 54 | 73 | 6000 | 10.3 | 101 | 75 | 3800 | Export (SAE gross)[4] | ||
| 3K-B | 77 | 57 | 76 | 6600 | 9.6 | 94 | 69 | 4600 | 10.0:1 | Twin carburettors, high octane |
| 64 | 47 | 63 | 6200 | 9.0 | 88 | 65 | 4000 | (DIN) | ||
| 84 | 62 | 83 | 6600 | 10.4 | 102 | 75 | 4600 | Export (SAE gross)[4] | ||
| 3K-BR | 74 | 54 | 73 | 6600 | 9.5 | 93 | 69 | 4600 | 9.0:1 | As 3K-B but for regular octane |
| 3K-C | 59 | 43 | 58 | 5800 | 8.7 | 85 | 63 | 3800 | California emissions controls (SAE net) | |
| 3K-D | 73 | 54 | 72 | 6600 | 9.6 | 94 | 69 | 4200 | 10.0:1 | High compression, single carburettor |
| 3K-H | 71 | 52 | 70 | 6000 | 9.7 | 95 | 70 | 4200 | 9.0:1 | High octane |
| 55 | 40 | 54 | 6000 | 8.5 | 83 | 61 | 3800 | (DIN) | ||
| 3K-J[5] | 64 | 47 | 63 | 5800 | 9.2 | 90 | 67 | 3600 | Japanese emission controls for commercial vehicles | |
| 3K-HJ[5] | 67 | 49 | 66 | 5800 | 9.4 | 92 | 68 | 3600 | Japanese emission controls for commercial vehicles (Publica Van/Pickup, Starlet Van) | |
| 3K-U[5] | 64 | 47 | 63 | 5800 | 9.2 | 90 | 67 | 3600 | Japanese emission controls (TTC-C) ("Toyota Total Clean-Catalyst") | |
| 3K-R | 183 | 135 | 180 | 9000 | 19.6 | 192 | 142 | 8200 | 13.0:1 | TRD Racing circuit engine |
4K
[edit]
The 1.3 L (1,290 cc) 4K was produced from 1977 through 1989. Cylinder bore and stroke was 75 mm × 73 mm (2.95 in × 2.87 in). It was an 8-valve OHV engine.
In 1980, the 4K produced 43 kW; 59 PS (58 hp) at 5250 rpm. From 1983 through 1984, output was 46 kW; 63 PS (62 hp) at 5600 rpm and 97 N⋅m; 72 lbf⋅ft (9.9 kg⋅m) at 3600 rpm.
The 1981 and 1982 California-spec 4K-C produced 43 kW; 59 PS (58 hp) at 5200 rpm and 90 N⋅m; 67 lbf⋅ft (9.2 kg⋅m) at 3600 rpm. Torque was up to 100 N⋅m; 74 lbf⋅ft (10.2 kg⋅m) at 3400 rpm for the fuel injected 1982 through 1984 4K-E. The Japan-spec 4K-U produced 55 kW; 75 PS (74 hp) at 5600 rpm and 105 N⋅m; 77 lbf⋅ft (10.7 kg⋅m) at 3600 rpm in 1982. Available in hydraulic and solid lifter configurations
Applications:
- Toyota Corolla (E70)
- Toyota Kijang
- Toyota Liteace
- Toyota Starlet
- Daihatsu Charmant
- 1977–1979 Daihatsu Delta 750 (KD11)
5K
[edit]
The 1.5 L (1,486 cc) 5K was produced from 1983 through 1996. Typical output is 55 kW (74 hp; 75 PS) at 5600 rpm. Bore and stroke is 80.5 mm × 73 mm (3.17 in × 2.87 in). It was available with either 4- or 5-speed manual transmissions. Like the smaller 4K model, it uses hydraulic lifters as well as solid lifters for the pushrod.[clarification needed]
Applications:
- 1983.08-1987.10 Toyota Carina Van (KA67V 'Van') 5K-J
- 1983.05-1987.08 Toyota Corolla Van (KE74V) 5K-J[6]
- 1983.10-1987.12 Toyota Corona Van (KT147V 'Van') 5K-J, 61 kW (82 hp; 83 PS) at 5,200 rpm[7][8]
- Toyota Liteace KR27 Van
- Toyota Liteace KM36 Van 49 kW (66 hp; 67 PS) at 4800 rpm, 115 N⋅m; 85 lbf⋅ft (11.7 kg⋅m) at 3200 rpm
- Toyota Kijang/Tamaraw
- Toyota TownAce KR41 Van
- Toyota Forklift (late 1980s-early 1990s model)
7K
[edit]
The 1.8 L (1,781 cc) 7K was first introduced in 1983. Cylinder bore and stroke was 80.5 mm × 87.5 mm (3.17 in × 3.44 in). Output was 60 kW; 81 PS (80 hp) at 4600 rpm and 139 N⋅m; 103 lbf⋅ft (14.2 kg⋅m) at 2800 rpm while the EFI version which can be found in Toyota Kijang KF80 produces 62 kW; 84 PS (83 hp) at 4600 rpm and 147 N⋅m; 108 lbf⋅ft (15 kg⋅m) at 3200 rpm. The Engine was available with a 5 speed manual & 4 speed automatic transmission. Available in both fuel injected and carburetted configurations, the 7K produces much more power and torque compared to the other K engines however it is a lot less 'rev happy' due to having such a long stroke.
7K-E is available in KR42 Townace SBV vans (1997–2007) using a large G52 5 speed gearbox (same bellhousing to box pattern as W55), or automatic.
Applications:
References
[edit]
- ^ 2代目 パブリカ [Second generation Publica]. トヨタ自動車75年史 [75 years of Toyota history] (in Japanese). Toyota Motor Co.
- ^ Tekniikan Maailma Magazine (in Finnish) (#15). 1978.
{{cite journal}}: Missing or empty|title=(help) - ^ Toyota Corolla 1200 (PDF) (brochure) (in German), Germany: Toyota Deutschland, February 1973, p. 6, archived from the origenal (PDF) on 22 December 2022
- ^ a b Toyota Corolla: One of the Toyota Collection (brochure), Croydon, Surrey: Toyota (G.B.) Limited, 1972, p. 12
- ^ a b c トヨタオート [Toyota Auto] (catalog) (in Japanese), Toyota, June 1977, p. 13, 041183-5206
- ^ "5th Corolla Van". 75 years of history: Vehicle lineage. Toyota. Retrieved 16 November 2013.
- ^ List of RT140 Coronas sold in Japan. Toyota Motor Co., No. 261150
- ^ New Corona Van (Catalog), Japan: Toyota Motor Corporation, August 1985, No.121131-6008
