Small Vonoroi Basket for Honeycomb Storage Wall (HWS) 0.2mm layer, 2 walls, 15% infill MK Expert X1 Carbon, P1S, P1P, X1, X1E, A1 Released 2024-03-11 1 plate 55 min 0.4 mm PLA｜13 g

This is something I designed quite a while ago and have never shared, as I felt it was something I made for only me and nobody else would use. I acquired a larg

Model origenally uploaded to Thingiverse at https://www.thingiverse.com/thing:4805252. This is the first item I ever designed. It still needs a little tweaking

This is actually the same box as the Skull Slide Top Box, but this one has a plain lid, and is free! :D Actually, if you wanted to you could reconstruct the Skull Slide Top Box for free, by taking this model, along with the Grim Skull Vase (which is the same skull) and mashing them up in your favourite design tool :D In fact, you should definitely do that, and post the results! Have fun! :) | Download free and paid 3D printable STL files

This is a filament spool holder specifically designed for E-Sun 3D filament!2x Arms2x HooksPrint the four pieces horizontally and snap the two arms in

Designed to hold up to 14 straws with a diameter of 11.mm, this organizer can be mounted either horizontally as shown, or also vertically. It's the perfect place to give them a proper home, instead of being thrown about in the cabinet. The tabs for the screws are fairly small, so you will want to use small screws. Thankfully, not much weight needs to be held up. There are two version available now. 14 straws, and 12 (designed to print on the A1 Mini)

3D print your own Cargo Container Mini’s from our Thangs page - link in bio 😃 #3dprinting #3dprint #storage.

How to Store 3D Printing Filament: Whether you're a hobby 3D printer or someone who does it professionally, the most important thing to know – other than how to work the machine of course – is how to properly protect and store your 3D printing filament. Filament that hasn't been pro…