KiCad library for various Type-C USB connectors

Currently included connectors:

Wurth 632723300011

• 1.6mm PCB compatibility
• Through-hole secondary pins; theoretically fully hand-solderable
• Most expensive of the three

HRO TYPE-C-31-M-12

• Extremely cheap
• Simplified design with only one row; hand-solderable
• Legs do not extend long enough to "officially" support 1.6mm PCBs (Can be soldered in, but legs will be shorter than PCB)

Amphenol 12401598E4#2A

• 1.6mm PCB compatibility
• Half the cost of the Wurth connector
• Requires reflow station or similar to solder full set of SMT pins below barrel

GCT USB4085-GF-A

• Only pins for USB 2.0
• All pins are through hole and are hand solderable
• Data pins barely break the surface of 1.6mm PCB
• Half the cost of the Amphenol