Adafruit CircuitPython BusDevice

The I2CDevice and SPIDevice helper classes make managing transaction state on a bus easy. For example, they manage locking the bus to prevent other concurrent access. For SPI devices, it manages the chip select and protocol changes such as mode. For I2C, it manages the device address.

Note

On microcontroller boards using CircuitPython v6.3.0 or newer, the firmware may already have the adafruit_bus_device package builtin, thus there may be no need to add this package to your CIRCUITPY drive's "lib" directory. If both the builtin and add-on adafruit_bus_device packages are present, then some libraries that require this package might have problems importing it.

Please check the CircuitPython documentation's "module support matrix" to make sure that your board's firmware does include the builtin adafruit_bus_device package.

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-busdevice

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-busdevice

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-busdevice

Usage Example

See examples/read_register_i2c.py and examples/read_register_spi.py for examples of the module's usage.

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!