I forget to add ollama on the pip installs, to fix this, you have to copy the following command to your terminal.

pip install ollama --break-system-package

I added it to the pip installs in the instructions and re-uploaded it, if you are to do it all over again, you won't need the command above. but just so you wouldn't need to re-install use the command.

I have tried to follow the instructions from @Abdulrahman392011 but i seem to fail in the usage section

open a terminal
cd into the app folder then paste:

python3 ./sync2.py

wait until the model is loaded. it will show you a message related to search and put you on a new line. 
then chat normally. 
########################################################################################################

Should I ignore python3 ./sync2.py, but type this on terminal pip install ollama --break-system-package

unzip synchronzer folder
cd synchronizer
python3 ./sync2.py
If you get errors then follow @Abdulrahman392011 solution pip install ollama ......

@nzola It's a lot of downloads to eventually not get it to work. If you still having troubles then don't be shy to speak up. Do as @EMG70 said then tell us if you got it to work or not.

Ok

Let me check something, just a sec

Please ignore above message,its all clear now as on screenshot.Very good project.

There's no simple way to explain it. It takes notes as you're chatting for the stuff needs searching, after 10 minutes of inactivity it dedicate the compute to searching and it becomes unavailable for chatting. When it finds something it opens it in the browser as a tap and explains its reason why it thinks it is useful for you and you should go through the stuff it opened.

If you don't want to wait the 10 minutes period of inactivity then type (search now) without the brackets.

Given that there's something from your conversation that it want to search for, it will start searching immediately.

But i remind you again that it will be unavailable for chatting while searching.

It responds very well.I will play around it to get specific topics from a known book.
Warning,a bit long video.
screen-capture (2).webm

@nzola ,Here's a reminder from the installation-instruction text.

Hi @EMG70 , @Abdulrahman392011 says it won't work on Raspberrypi. i

I think there's some confusion on the minimum hardware requirements

8 gigabytes of vRAM or unified RAM
40 tops of gpu compute

Anything lower than this it won't work and even if you got it to work on swap memory, the performance will be too slow and impractical.

Thanks @Abdulrahman392011. I was also trying point Nzola to the requirements in your txt .

Thanks @Abdulrahman392011. I was also trying point Nzola to the requirements in your txt .

I should have added the hardware requirements to the installation requirements to avoid this.

I will add it and re-upload.

Thanks @Abdulrahman392011 and @EMG70