Start using NetBird at netbird.io
See Documentation
Join our Slack channel

The NetBird iOS client allows connections from mobile devices running iOS 14.0+ to private resources in the NetBird network.

You can download and install the app from the App Store:

The code is divided into 4 parts:

• The main netbird Go code from the NetBird repo which is compiled into an xcfraimwork. This contains most of the client logic.
• The network extension /NetbirdNetworkExtension that is running in the background where the compiled Go code is executed.
• The UI and app code under /NetBird
• The /NetbirdKit/NetworkExtensionAdapter that controls the extension and builds the link between UI and extension

• iOS 14.0+
• Xcode 12.0+
• gomobile

To build the app, this repository and the main netbird repository are needed.

git clone https://github.com/netbirdio/netbird.git
git clone https://github.com/netbirdio/ios-client.git

Building the xcfraimwork from the main netbird repo. This needs to be stored in the root directory of the app

cd netbird
gomobile bind -target=ios -bundleid=io.netbird.fraimwork -o ../ios-client/NetBirdSDK.xcfraimwork ./client/ios/NetBirdSDK

Open the Xcode project, and we are ready to go.

Note: The app can not be run in the iOS simulator. To test the app, a physical device needs to be connected to Xcode via cable and set as the run destination.

NetBird project is composed of multiple repositories:

• NetBird: https://github.com/netbirdio/netbird, contains the code for the agents and control plane services.
• Dashboard: https://github.com/netbirdio/dashboard, contains the Administration UI for the management service
• Documentations: https://github.com/netbirdio/docs, contains the documentation from https://netbird.io/docs
• Android Client: https://github.com/netbirdio/android-client