m\*

An abstract interface which defines visualization and the parameter for rotation. E.g. m2, m2.5, m8, m32.

m*-opening

An abstract interface for openings: thru or not, threaded or not (as opposed to screws, shafts etc)

m*-hole-*

A hole of the corresponding depth (not a thru). No thread. E.g. m2-hole-8 for an 8mm deep hole in a surface of more than 8mm thickness.

m*-thru

A thru opening of an unspecified depth. No thread.

m*-thru-*

A thru opening of the specified depth. No thread. E.g. m2-thru-8 for a thru opening in an 8mm thick surface.

m*-thru-*-slotted-*

A slotted thru opening of the specified depth and width. E.g. m2-thru-8-slotted-30 for a 30mm wide slot in an 8mm thick surface.

m*-threaded-hole-*

A threaded hole of the corresponding depth (not a thru). E.g. m2-threaded-hole-8 for an 8mm deep threaded hole in a surface of more than 8mm thickness.

m*-threaded-thru-*

A thru opening of the specified depth. E.g. m2-threaded-thru-8 for a threaded thru opening in an 8mm thick surface.

m*-shaft

An abstract class for shafts. No thread.

m*-shaft-*

A shaft of the specified length. No thread.

m*-screw

An abstract class for screws.

m*-screw-*

A screw of the specified length. Defines the parameter to specify how deep it goes in. E.g. m4-screw-12 for a 12mm long M4 screw.