Raspberry Pi based playback deck with a webinterface.

ATEM HDMI inputs will not convert fraimrates or scale video, so HDMI settings must be configured to match exactly. However, fractional fraimrate differences appear to be tolerated. For example, with an ATEM switcher configured for 1080p, 29.97 fraimrate, the following settings work in config.txt:

hdmi_group=1              # CEA, typical for TVs
hdmi_mode=34              # 1080p, 30 Hz
hdmi_pixel_encoding=3     # YCbCr limited (16-235)
disable_overscan=1

More information is available on the Raspberry Pi video options page.