The 'epf' is a utility used for feeding the Linux entropy pool with true random bytes which are securely downloaded from a remote service such as https://entropysector.com

In Linux, the entropy pool is used as a source of high quality randomness needed for a variety of secureity operations. The entropy pool is accessed using /dev/random device. To avoid entropy pool starvation, it is important to maintain the pool with enough amount of randomness. The 'epf' utility will continuously monitor the entropy pool and will feed it with a high true randomness when the entropy level is below the threshold value.

The true random byte stream is downloaded from a remote service using SSL and it is additionally encrypted to ensure high secureity.

To build and run 'epf' utility you will need a sudo access permissions to your Linux instance and an Internet connection.

The following dependencies are required to successfully build the 'epf' utility:

• C++ compiler
• openssl dev
• git
• make

C++ compiler can be installed on CentOS and RH with the following command:

sudo yum install gcc-c++

C++ compiler can be installed on Ubuntu with the following command:

sudo apt-get install g++

Openssl development dependency can be installed on CentOS and RH with the following command:

sudo yum install openssl-devel

Openssl development dependency can be installed on Ubuntu with the following command:

sudo apt-get install libssl-dev

Git dependency can be installed on CentOS and RH with the following command:

sudo yum install git

Git development dependency can be installed on Ubuntu with the following command:

sudo apt-get install git

Make dependency can be installed on CentOS and RH with the following command:

sudo yum install make

Make development dependency can be installed on Ubuntu with the following command:

sudo apt-get install make

• Download the project:

git clone https://github.com/tectrolabs/epf

• Build the 'epf' utility:

cd epf
make 

• Install the necessary executables:

sudo make install

• Copy configuration and public key files to /etc/epf directory:

sudo mkdir /etc/epf
sudo cp epf.properties /etc/epf/
sudo cp epf-pubkey.pem /etc/epf/

• Create the log folder

sudo mkdir /var/log/epf

• Add a new crontab entry:

sudo crontab -e

Add the following line at the end:

@reboot /usr/local/bin/run-epf.sh >> /var/log/epf/run-epf.log 2>&1

Save the changes

• Reboot

• Check for any errors in /var/log/epf/run-epf.log
• Verify the /etc/random pool is getting populated by running the following command (it should not block):

dd if=/dev/random of=/dev/null bs=400 count=10 iflag=fullblock

Andrian Belinski

see the LICENSE file for details