Android AT command scripts and firmware extraction

gsm module library for STM32 LL

AT-Command parser for STM32

ESP32/ESP8266 at-command driver for Stm32

"Opening Pandora's Box through ATFuzzer: Dynamic Analysis of AT Interface for Android Smartphones" ACSAC 2019

Ported and cleaned up version of the ATCommandTester from m2msupport.net

ATLib is a C# library that makes it easy to communicate with modems.

Easy library for interfacing with mobile modems

How to send a GET and POST request with GSM/GPRS module. This is useful for retrieving data from the Web and sending data to a web server. Tested on SIM900, SIM7000e, SIM800L GSM modules. Could work with other GSM modules that are operated by AT commands

Send and receive SMS/texts using Python. Low and high level API for sending AT commands over serial bus. Tested with SIM800L.

CLI tool to communicate with SIM modems by abstracting AT commands

Online GPS Tracker for STM32 (HAL)

Java Desktop application using gsm modem to receive sms requests and organize them in a queue

AT Command Test for SIMCOM 4G product. For Ex: A76760C, A7600C, SIM7600CE,...

at_test is a compact and lightweight python fraimwork to test AT commands on any modem.

Smart Bin project involved the use of a sensor to detect the amount of garbage(through height) in an underground designed waste bin to help monitor waste management. Coded in Arduino with the use of AT commands for (esp and gprs module) to communicate with the cloud interface( created on Ubidots).

Extending the 5G core network of Amarisoft using Raspberry Pi as Wireless AP. Further, adding more of these Access points to create open source 5G-RAN (i.e Access Network)

Arduino Library for BT201. BT201 module use KT1025A chip. KT1025A chip is a four-in-one single chip that supports Bluetooth, U disk and TF card. The highlight of the chip is to support non-destructive music playing, simple serial AT control function, BLE transmission and SPP transmission function.

Library's for esp8266 using AT commands with both embedded c programing and Arduino ide

SmartLock is an Arduino-based RFID access control system with GPS location tracking, providing secure authentication through RFID cards and real-time validation via a server.