Content-Length: 10485 | pFad | http://lwn.net/Articles/718137/

rk808: Add RK805 support [LWN.net]
|
|
Subscribe / Log in / New account

rk808: Add RK805 support

From:  Elaine Zhang <zhangqing-AT-rock-chips.com>
To:  lee.jones-AT-linaro.org, lgirdwood-AT-gmail.com, broonie-AT-kernel.org
Subject:  [PATCH v5 0/7] rk808: Add RK805 support
Date:  Mon, 27 Mar 2017 14:21:38 +0800
Message-ID:  <1490595705-28844-1-git-send-email-zhangqing@rock-chips.com>
Cc:  huangtao-AT-rock-chips.com, xxx-AT-rock-chips.com, linux-rockchip-AT-lists.infradead.org, linux-kernel-AT-vger.kernel.org, chenjh-AT-rock-chips.com, robh+dt-AT-kernel.org, mark.rutland-AT-arm.com, devicetree-AT-vger.kernel.org, w.egorov-AT-phytec.de, Elaine Zhang <zhangqing-AT-rock-chips.com>

change in v5:
PATCH V5 1/7: NO change in V5
PATCH V5 2/7: fix the rk805 reg addr in numerical order
PATCH V5 3/7: NO change in V5
PATCH V5 4/7: fix up the rk805_device_shutdown func
PATCH V5 5/7: NO change in V5
PATCH V5 6/7: NO change in V5
PATCH V5 7/7: fix up the description of the rk805

change in v4:
PATCH V4 1/7: NO change in V4
PATCH V4 2/7: rename the commit message
PATCH V4 3/7: NO change in V4
PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
PATCH V4 5/7: new added
PATCH V4 6/7: new added
PATCH V4 7/7: NO change in V4


change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
              use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
              use pm_shutdown_prepare_fn to prepare shutdown
              and pm_pwroff_fn pull down gpio to shut down rk805
              it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3

change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document

Elaine Zhang (7):
  mfd: rk808: fix up the chip id get failed
  mfd: rk808: add rk805 regs addr and ID
  regulator: rk808: Add regulator driver for RK805
  mfd: rk808: Add RK805 support
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
  mfd: dt-bindings: Add RK805 device tree bindings document

 Documentation/devicetree/bindings/mfd/rk808.txt |  20 +++-
 drivers/clk/Kconfig                             |   4 +-
 drivers/mfd/Kconfig                             |   4 +-
 drivers/mfd/rk808.c                             | 129 +++++++++++++++++++++--
 drivers/regulator/Kconfig                       |   4 +-
 drivers/regulator/rk808-regulator.c             | 130 ++++++++++++++++++++++++
 drivers/rtc/Kconfig                             |   4 +-
 include/linux/mfd/rk808.h                       | 121 ++++++++++++++++++++++
 8 files changed, 401 insertions(+), 15 deletions(-)

-- 
1.9.1




Copyright © 2017, Eklektix, Inc.
Comments and public postings are copyrighted by their creators.
Linux is a registered trademark of Linus Torvalds









ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: http://lwn.net/Articles/718137/

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy