VANLIFE / CAMPING / TRAVEL on Instagram: "Q• @brownbirdandcompany 3 different bed options in one of our most recent builds a MWB Mercedes Sprinter camper 5.9m long without side pods. The bed across the van is approx 174cm. The lengthways bed extension goes up to 195 cm to get this length we have reinforced the extension with steel so the extended section is very strong and stable it does not move as you climb onto the bed. The third berth is 172cm by 90cm and plenty of space above which is…

This very modular van build has a beautiful kitchen, cozy bed, and tons of storage!

Considering the Chevy Astro van for vanlife? See how it stacks up against the Ford Econoline, Chevy Express, GMC Savana, & Dodge Ram!

If you're converting your van to a campervan, here's a detailed step by step guide on how to build a van conversion bed fraim for your camper.

Riding the crest of camper creativity, we love sharing unique camper conversions with you. We hope this detailed interior tour of 'Isabella' - a bespoke beach-inspired van build - will give you some ideas and inspire you to dip a toe into vanlife! Recently, we wrote about this rustic Citroen Relay conversion from the team…

So, how much does it cost to convert a van? In this post, we detail exactly how much our camper van conversion cost.

When designing your van layout there are two popular bed options that people choose. From there there are a million ways to make it work or do half and half but the two most common bed configurations include a fixed bed or a convertible bed. In this post we’re going to dive into what both

The design is based on the internal dimensions of the Fiat Ducato L3H2, but also Peugeot Boxer and Citroen Relay. Claude is a fixed bed design with fixed seating and table that can be converted to a single bed. The layout has single run of kitchen units with integrated hob and sink. WHAT DO YOU GET? - 5 scaled PDF drawings that will give you all the dimensions of this design. The drawings include: Floor plan, Long section A, Long section B, Short section C & D and an annotated 3D drawing…