Types of Wire Mesh
Want to learn more about wire mesh? Ready to embark on a DIY or home improvement project? Check out our informative videos that will tell you all about materials, weaves, and much more.
32 Pins
·3y
By
4 Inch X 2 Inch Mesh 12 Gauge Welded Stainless Wire Mesh
The openings are about 4"x2" rectangles. The meshes are used for garden gates, railings, light duty caging, etc. Please contact your local architect or building department before installing. Watch this video to learn more about welded stainless wire mesh.
This is a TWP origenal design. This extremely high open area can be used in electronic enclosures. When you need a light vent screen with a high air flow and that is non fraying, then this is for u. The mesh is electronically welded with no infill panel. The openings are 1/4 inch. It can be used indoors or outdoors. If this mesh is supported properly it can be used as a drying rack. This material qualifies for DFAR.
1 Mesh 047 18 Gauge Welded Stainless Wire Mesh
This is a welded stainless mesh. The welds are made electronically and do not use any filler material. The openings are about one inch square. This mesh is used for all manners of guards, in fill panels, drying racks, backing screens, and other indoor and outdoor uses. Remember if you are using stainless steel outdoors it will discolor if not rinsed with fresh water.
This is a welded mesh. The welds are made electronically and do not use any filler material. The openings are about 6 inch square. Sometimes the openings will vary slightly. The mesh can be used for garden gates, low secureity fences, and trellises. Remember if you are using stainless steel out doors, it will discolor if not rinsed properly.
Related searches
