| Port details |
- p5-Giovanni PERL-based software deployment tool inspired by capistrano
- 1.12 sysutils
 =2      1.12Version of this port present on the latest quarterly branch. - Maintainer: dch@FreeBSD.org
- Port Added: 2017-04-05 02:16:41
- Last Update: 2022-09-07 21:58:51
- Commit Hash: fb16dfe
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: perl5
- License: ART10 GPLv1+
- WWW:
- https://metacpan.org/release/Giovanni
- Description:
- Giovanni is a Perl replacement for the idea behind Capistrano.
It is a deployment system that can be used comfortably from the
commandline to check out code, restart systems and notify.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-Giovanni>0:sysutils/p5-Giovanni
- Conflicts:
- CONFLICTS_INSTALL:
- To install the port:
- cd /usr/ports/sysutils/p5-Giovanni/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/p5-Giovanni
- pkg install p5-Giovanni
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-Giovanni
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1491312863
SHA256 (Giovanni-1.12.tar.gz) = 2bbea32a94d6bb182ccd003b9602658c31ed82e1c0f314bca16969c8eb449633
SIZE (Giovanni-1.12.tar.gz) = 15897
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- p5-Config-GitLike>=0 : devel/p5-Config-GitLike
- p5-Expect>=0 : lang/p5-Expect
- p5-Git-Repository>=0 : devel/p5-Git-Repository
- p5-LWP-Protocol-https>=0 : www/p5-LWP-Protocol-https
- p5-libwww>=0 : www/p5-libwww
- p5-Mouse>=0 : devel/p5-Mouse
- p5-Net-OpenSSH>=0 : net/p5-Net-OpenSSH
- perl5>=5.32.r0<5.33 : lang/perl5.32
- perl5>=5.32.r0<5.33 : lang/perl5.32
- Runtime dependencies:
-
- p5-Config-GitLike>=0 : devel/p5-Config-GitLike
- p5-Expect>=0 : lang/p5-Expect
- p5-Git-Repository>=0 : devel/p5-Git-Repository
- p5-LWP-Protocol-https>=0 : www/p5-LWP-Protocol-https
- p5-libwww>=0 : www/p5-libwww
- p5-Mouse>=0 : devel/p5-Mouse
- p5-Net-OpenSSH>=0 : net/p5-Net-OpenSSH
- perl5>=5.32.r0<5.33 : lang/perl5.32
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- sysutils_p5-Giovanni
- USES:
- perl5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
07 Sep 2022 21:58:51
 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.12
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.12
10 Jan 2022 15:15:39
|
Stefan Eßer (se) |
Fix CONFLICTS entries of multiple ports
There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.
This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.
Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port (Only the first 15 lines of the commit message are shown above ) |
1.12
19 Oct 2021 08:36:47
|
Tobias Kortkamp (tobik) |
*: apply refactor.remove-consecutive-empty-lines
Submitted by: portedit |
1.12
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
1.12
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.12
21 May 2019 11:49:16
 |
dch |
fix auto-assign for BZ PRs by updating MAINTAINER for my ports
Approved by: jrm (mentor)
Differential Revision: https://reviews.freebsd.org/D20331 |
1.12
06 Oct 2018 13:06:45
|
des |
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw) |
1.12
27 May 2018 20:15:20
|
sunpoet |
Update WWW
search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.
With hat: perl |
1.12
01 Nov 2017 13:10:35
|
olgeni |
Fix whitespace issues (mixed tab/spaces, alignment) in a few ports. |
1.12
15 Sep 2017 08:58:50
|
mat |
Fix license information for portgs that use "the same license as Perl".
Sponsored by: Absolight |
1.12
08 Apr 2017 21:09:36
|
ler |
Fix license files missing, causing build failure.
Approved by: adamw (Mentor) |
1.12
05 Apr 2017 02:16:34
|
ler |
sysutils/p5-Giovanni: a perl-based software deployment tool inspired by
capistrano - v1.12
Giovanni is a Perl replacement for the idea behind Capistrano.
It is a deployment system that can be used comfortably from the
commandline to check out code, restart systems and notify.
PR: 218373
Submitted by: Dave Cottlehuber <dch@skunkwerks.at>
Approved by: adamw (mentor)
Differential Revision: https://reviews.freebsd.org/D10277 |
As an Amazon Associate I earn from qualifying purchases.