After making my modified Paulk workbench and making changes to it again to add clamping holes I received a ton of recommendations on how to modify different kind of clamps to make them easier to us…

Tommy from Italy follows the "Old Italian Woodworker's Rule" when it comes to finishing his Folding Workbench!

Beech and sapele workbench by Charles Kline, Concord, Mass. — Charles’s workbench sports a repurposed Ulmia top and a 100-year-old Emmert vise on the far side. The storage area incorporates the three-way miter joint Andrew Hunter wrote about in FWW 227 (Master Class). BEECH, SAPELE, MAHOGANY, POPLAR, 25D x 84W x 36H

Materials & plan For those of you bored enough to actually read this, I ask that you bear in mind that this is my first blog of any nature and so it may be...

DK_CO's Project

Extreme Heavy Duty Work Bench: Intro: I have an area in the old barn that is unused and I wanted to convert to a 'rough' working place. The floor is unlevelled , which require adjustable feet to adjust for the height difference up to 30 mm. The angle of the wall corners are …

We looked at all of our clever workbench upgrades and narrowed it down to these 10 winners. Each one helps you get the most from your hard-working workbench.

When I built my last workbench, assembly table, oufeed table combo I was in a shop about half the size of the shop I am in today. I made it to fit that space and with materials I had on hand. Since…

glucas4's Project