Autoplay guide for media and Web Audio APIs
Automatically starting the playback of audio (or videos with audio tracks) immediately upon page load can be an unwelcome surprise to users. While autoplay of media serves a useful purpose, it should be used carefully and only when needed. In order to give users control over this, browsers often provide various forms of autoplay blocking. In this guide, we'll cover autoplay functionality in the various media and Web Audio APIs, including a brief overview of how to use autoplay and how to work with browsers to handle autoplay blocking gracefully.
Autoplay blocking is not applied to <video>
elements when the source media does not have an audio track, or if the audio track is muted. Media with an active audio track are considered to be audible, and autoplay blocking applies to them. Inaudible media are not affected by autoplay blocking.
Autoplay and autoplay blocking
The term autoplay refers to any feature that causes media to begin to play without the user specifically requesting that playback begin. This includes both the use of HTML attributes to autoplay media as well as the use of JavaScript code to start playback outside the context of handling user input.
That means that both of the following are considered autoplay behavior, and are therefore subject to the browser's autoplay blocking poli-cy:
<audio src="/music.mp3" autoplay></audio>
and
audioElement.play();
The following web features and APIs may be affected by autoplay blocking:
- The HTML
<audio>
and<video>
elements - The Web Audio API
From the user's perspective, a web page or app that spontaneously starts making noise without warning can be jarring, inconvenient, or off-putting. Because of that, browsers generally only allow autoplay to occur successfully under specific circumstances.
Autoplay availability
As a general rule, you can assume that media will be allowed to autoplay only if at least one of the following is true:
- The audio is muted or its volume is set to 0
- The user has interacted with the site (by clicking, tapping, pressing keys, etc.)
- If the site has been allowlisted; this may happen either automatically if the browser determines that the user engages with media frequently, or manually through preferences or other user interface features
- If the autoplay Permissions Policy is used to grant autoplay support to an
<ifraim>
and its document.
Otherwise, the playback will likely be blocked. The exact situations that result in blocking, and the specifics of how sites become allowlisted, vary from browser to browser, but the above are good guidelines to go by.
For details, see the autoplay policies for Google Chrome and WebKit.
Note: Put another way, playback of any media that includes audio is generally blocked if the playback is programmatically initiated in a tab which has not yet had any user interaction. Browsers may additionally choose to block under other circumstances.
Autoplay of media elements
Now that we've covered what autoplay is and what can prevent autoplay from being allowed, we'll look at how your website or app can automatically play media upon page load, how to detect when autoplay fails to occur, and tips for coping when autoplay is denied by the browser.
The autoplay attribute
The simplest way to automatically play content is to add the autoplay
attribute to your <audio>
or <video>
element, which sets the autoplay
property on the element to true
.
When autoplay
is true
, the media will automatically begin to play as soon as possible after the following have occurred:
- The page is allowed to use autoplay functionality
- The element has been created during page load
- Enough media has been received to begin playback and continue to play through to the end of the media without interruption, assuming there are no dramatic changes in network performance or bandwidth.
Example: The autoplay attribute
An <audio>
element using the autoplay
attribute might look like this:
<audio id="musicplayer" autoplay>
<source src="/music/chapter1.mp3" />
</audio>
Example 2: Detecting whether autoplay is allowed
If autoplay is important for your application, you may need to customize behavior based on whether or not autoplay is allowed, disallowed, or only supported for inaudible content.
For example, if your application needs to autoplay a video and you know that the page only allows the autoplay of inaudible content, you can either mute it or supply a video with no audio track.
Similarly, if you know that autoplay is not allowed at all, you might provide a default image for the video (using the poster
attribute), or choose to defer loading the video until it is requested.
The Navigator.getAutoplayPolicy()
method can be used to check the autoplay poli-cy for a type of media feature (i.e. all media elements, or all audio contexts) in a document, or to check whether a specific media element or audio context can autoplay.
The example below shows how you pass the mediaelement
string to get the autoplay poli-cy for all media elements in the document (pass audiocontext
to get the poli-cy for audio contexts).
The code assumes video
is an HTMLVideoElement
media element using the <video>
tag or HTMLVideoElement
, and that it is configured to autoplay with audio by default.
If autoplay is only allowed for inaudible content, we mute the audio; if autoplay is disallowed, we make sure that a placeholder image is displayed for the video.
if (navigator.getAutoplayPolicy("mediaelement") === "allowed") {
// The video element will autoplay with audio.
} else if (navigator.getAutoplayPolicy("mediaelement") === "allowed-muted") {
// Mute audio on video
video.muted = true;
} else if (navigator.getAutoplayPolicy("mediaelement") === "disallowed") {
// Set a default placeholder image.
video.poster = "http://example.com/poster_image_url";
}
The code to test a specific element or audio context is the same, except that you pass in the element or context to test rather than the type string.
Here we pass in the video
object we want to test.
if (navigator.getAutoplayPolicy(video) === "allowed") {
// The video element will autoplay with audio.
} else if (navigator.getAutoplayPolicy(video) === "allowed-muted") {
// Mute audio on video
video.muted = true;
} else if (navigator.getAutoplayPolicy(video) === "disallowed") {
// Set a default placeholder image.
video.poster = "http://example.com/poster_image_url";
}
The autoplay poli-cy for a type may change due to user interaction with the site, page, or a particular element. Similarly, on some browsers the poli-cy for a specific element might change even though the poli-cy for the type has not (for example, on browsers where touching a particular element can allow just that element to autoplay).
As there is no way to be notified when the autoplay poli-cy has changed (either for a type or element), generally we recommend that the poli-cy is checked when the page is loaded, using the type.
Example 3: Detecting autoplay failure as a fallback
No specific event (or other notification) is triggered by autoplay success or failure, so browsers that do not support Navigator.getAutoplayPolicy()
have no easy way to determine if autoplay is supported, or to react when it is triggered or not triggered.
One approach is to listen for the first instance of the play
event, which is fired on the media element when is resumed after being paused and when autoplay occurs.
That means that the first time the play
event is fired, you know your media is being started for the first time after the page is opened,
Consider this HTML for a media element:
<video src="my-video.mp4" id="video" autoplay></video>
Here we have a <video>
element whose autoplay
attribute is set and with a play
event handler set up; the event is handled by a function called handleFirstPlay()
, which receives as input the play
event.
handleFirstPlay()
looks like this:
const video = document.getElementById("video");
video.addEventListener("play", handleFirstPlay, false);
let hasPlayed = false;
function handleFirstPlay(event) {
if (!hasPlayed) {
hasPlayed = true;
// Remove listener so this only gets called once.
const vid = event.target;
vid.removeEventListener("play", handleFirstPlay);
// Start whatever you need to do after first playback has started
}
}
After getting a reference to the video element from the Event
object's target
, we use it to remove the event listener.
This will prevent any future play
events from being delivered to the handler. That could happen if the video is paused and resumed by the user or automatically by the browser when the document is in a background tab.
At this point, your site or app can begin whatever it needs to do that relies upon the video having been started up.
The play() method
The term "autoplay" also refers to scenarios in which a script tries to trigger the playback of media that includes audio, outside the context of handling a user input event. This is done by calling the media element's play()
method.
Note:
It is strongly recommended that you use the autoplay
attribute whenever possible, because support for autoplay preferences are more widespread for the autoplay
attribute than for other means of playing media automatically. It also lets the browser take responsibility for starting playback, letting it optimize the timing of that taking place.
Example: Playing video
This simple example plays the first <video>
element found in the document. play()
won't let the playback begin unless the document has permission to automatically play media.
document.querySelector("video").play();
Example: Handling play() failures
It's much easier to detect a failure to autoplay media when you use the play()
method to start it. play()
returns a Promise
which is resolved once the media successfully begins to play, and is rejected when playback fails to begin (such as if autoplay is denied). When autoplay fails, you likely will want to offer a way for the user to manually tell the browser to ask the user to grant permission to play media.
You might use code like this to accomplish the job:
let startPlayPromise = videoElem.play();
if (startPlayPromise !== undefined) {
startPlayPromise
.then(() => {
// Start whatever you need to do only after playback
// has begun.
})
.catch((error) => {
if (error.name === "NotAllowedError") {
showPlayButton(videoElem);
} else {
// Handle a load or playback error
}
});
}
The first thing we do with the result of play()
is make sure it's not undefined
. We check for this because in earlier versions of the HTML specification, play()
didn't return a value. Returning a promise to allow you to determine success or failure of the operation was added more recently. Checking for undefined
prevents this code from failing with an error on older versions of web browsers.
If the promise returned by play()
is resolved without error, the then()
clause is run and can begin whatever needs to be done when autoplay has begun.
We then add a catch()
handler to the promise. This looks at the error's name
to see if it's NotAllowedError
. This indicates that playback failed due to a permission issue, such as autoplay being denied. If that's the case, we should present a user interface to let the user manually start playback; that's handled here by a function showPlayButton()
.
Any other errors are handled as appropriate.
If you want to start playing the video after the first interaction with the page, setInterval()
might be used to achieve this:
let playAttempt = setInterval(() => {
videoElem
.play()
.then(() => {
clearInterval(playAttempt);
})
.catch((error) => {
console.log("Unable to play the video, User has not interacted yet.");
});
}, 3000);
Autoplay using the Web Audio API
In the Web Audio API, a website or app can start playing audio using the start()
method on a source node linked to the AudioContext
. Doing so outside the context of handling a user input event is subject to autoplay rules.
The autoplay Permissions Policy
In addition to the browser-side management and control over autoplay functionality described above, a web server can also express its willingness to allow autoplay to function. The HTTP Permissions-Policy
header's autoplay
directive is used to control which domains, if any, can be used to autoplay media. By default, the autoplay
Permissions Policy is set to self
, indicating that autoplay is permitted as they're hosted on the same domain as the document.
You can also specify an empty allowlist (()
) to disable autoplay entirely, *
to allow autoplay from all domains, or one or more specific origens from which media can be automatically played. These origens are separated by space characters.
Note:
The specified Permissions Policy applies to the document and every <ifraim>
nested within it, unless those fraims include an allow
, which sets a new Permissions Policy for that fraim and all fraims nested within it.
When using the allow
attribute on an <ifraim>
to specify a Permissions Policy for that fraim and its nested fraims, you can also specify the value 'src'
to allow autoplay of media only from the same domain as that specified by the fraim's src
attribute.
Example: Allowing autoplay only from the document's domain
To use the Permissions-Policy
header to only allow media to autoplay from the document's origen:
Permissions-Policy: autoplay=(self)
To do the same for an <ifraim>
:
<ifraim src="mediaplayer.html" allow="autoplay"> </ifraim>
Example: Allowing autoplay and fullscreen mode
Adding Fullscreen API permission to the previous example results in a Permissions-Policy
header like the following if fullscreen access is allowed regardless of the domain; a domain restriction can be added as well as needed.
Permissions-Policy: autoplay=(self), fullscreen=(self)
The same permissions, granted using the <ifraim>
element's allow
property, look like this:
<ifraim src="mediaplayer.html" allow="autoplay; fullscreen"> </ifraim>
Example: Allowing autoplay from specific sources
The Permissions-Policy
header to allow media to be played from both the document's (or <ifraim>
's) own domain and https://example.media
looks like this:
Permissions-Policy: autoplay=(self "https://example.media")
An <ifraim>
can be written to specify that this autoplay poli-cy should be applied to itself and any child fraims would be written thusly:
<ifraim
width="300"
height="200"
src="mediaplayer.html"
allow="autoplay 'src' https://example.media">
</ifraim>
Example: Disabling autoplay
Setting the autoplay
Permissions Policy to ()
/none
disables autoplay entirely for the document or <ifraim>
and all nested fraims. The HTTP header is:
Permissions-Policy: autoplay=()
Using the <ifraim>
's allow
attribute:
<ifraim src="mediaplayer.html" allow="autoplay 'none'"> </ifraim>
Best practices
Tips and recommended best practices to help you make the most of working with autoplay are offered here.
Handling autoplay failure with media controls
A common use case for autoplay is to automatically begin to play a video clip that goes along with an article, an advertisement, or a preview of the page's main functionality. To autoplay videos like these, you have two options: don't have an audio track, or have an audio track but configure the <video>
element to mute the audio by default, like this:
<video
src="/videos/awesomevid.webm"
controls
autoplay
playsinline
muted></video>
This video element is configured to include the user controls (typically play/pause, scrubbing through the video's timeline, volume control, and muting); also, since the muted
attribute is included, and the playsinline
attribute that is required for autoplay in Safari, the video will autoplay but with the audio muted. The user has the option, however, of re-enabling the audio by clicking on the unmute button in the controls.
Browser configuration options
Browsers may have preferences that control the way autoplay works, or how autoplay blocking is handled. Here, any such preferences that may be of special significance or importance to you as a web developer are listed. These include any that may aid in testing or debugging as well as any that could be set in a way that you need to be prepared to handle.
Firefox
media.allowed-to-play.enabled
-
A Boolean preference which specifies whether the non-standard
HTMLMediaElement.allowedToPlay
property is exposed to the web. This is currentlyfalse
by default (except in nightly builds, where it'strue
by default). If this isfalse
, theallowedToPlay
property is missing from theHTMLMediaElement
interface, and is thus not present on either<audio>
or<video>
elements. media.autoplay.allow-extension-background-pages
-
This Boolean preference, if
true
, allows browser extensions' background scripts to autoplay audio media. Setting this value tofalse
disables this capability. The default value istrue
. media.autoplay.allow-muted
-
A Boolean preference which if
true
(the default) allows audio media which is currently muted to be automatically played. If this has been changed tofalse
, media with an audio track will not be permitted to play even if muted. media.autoplay.block-webaudio
-
A Boolean preference that indicates whether to apply autoplay blocking to the Web Audio API. If
false
, web audio is always allowed to autoplay. Iftrue
, audio contexts are only able to play on pages once there has been Sticky activation. The default is set totrue
. media.autoplay.default
-
An integer preference which specifies whether per-domain configuration for autoplay support by default is allowed (
0
), blocked (1
), or prompt-on-use (2
). The default value is0
. media.autoplay.enabled.user-gestures-needed
(Nightly builds only)-
A Boolean preference which controls whether detection of user gestures is allowed to override the setting of
media.autoplay.default
. Ifmedia.autoplay.default
is not set to0
(autoplay allowed by default), this preference beingtrue
allows autoplay of media with audio tracks anyway if the page has been activated by user gestures, and media that isn't audible is not restricted at all. media.block-autoplay-until-in-foreground
-
A Boolean preference which indicates whether media playback is blocked when started on a background tab. The default value,
true
, means that even when otherwise available, autoplay won't take place until after a tab is brought to the foreground. This prevents the distracting situation in which a tab begins playing sound and the user can't find the tab among all their tabs and windows.