16 Generalized Hypergeometric Functions & Meijer G-Function Generalized Hypergeometric Functions 16.1 Special Notation 16.3 Derivatives and Contiguous Functions

§16.2 Definition and Analytic Properties

ⓘ

Defines:: ${{}_{2}F_{1}}\left(\NVar{a},\NVar{b};\NVar{c};\NVar{z}\right)$ : $=F\left(\NVar{a},\NVar{b};\NVar{c};\NVar{z}\right)$ notation for Gauss’ hypergeometric function, ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{a_{1},\dots,a_{p}};\NVar{b_{1},\dots,b_% {q}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{a_{1},\dots,a_{p}}\atop\NVar{b_{1},% \dots,b_{q}}};\NVar{z}\right)$ : alternatively ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{\mathbf{b}}};% \NVar{z}\right)$
generalized hypergeometric function and ${{}_{1}F_{1}}\left(\NVar{a};\NVar{b};\NVar{z}\right)$ : $=M\left(\NVar{a},\NVar{b},\NVar{z}\right)$ notation for the Kummer confluent hypergeometric function
Referenced by:: §18.12, §18.20(ii), §18.23, §18.26(i), §18.5(iii), §34.2, §34.4, §5.16
Permalink:: http://dlmf.nist.gov/16.2
See also:: Annotations for Ch.16

§16.2(i) Generalized Hypergeometric Series

ⓘ

Keywords:: definition, definitions, generalized hypergeometric function ${{}_{0}F_{2}}$ , generalized hypergeometric functions, generalized hypergeometric series, notation
Referenced by:: §13.1, §13.31(iii), §17.4(i), §2.10(iii), §7.11
Permalink:: http://dlmf.nist.gov/16.2.i
See also:: Annotations for §16.2 and Ch.16

Throughout this chapter it is assumed that none of the bottom parameters $b_{1}$ , $b_{2}$ , $\dots$ , $b_{q}$ is a nonpositive integer, unless stated otherwise. Then formally

16.2.1		${{}_{p}F_{q}}\left({a_{1},\dots,a_{p}\atop b_{1},\dots,b_{q}};z\right)=\sum_{k% =0}^{\infty}\frac{{\left(a_{1}\right)_{k}}\cdots{\left(a_{p}\right)_{k}}}{{% \left(b_{1}\right)_{k}}\cdots{\left(b_{q}\right)_{k}}}\frac{z^{k}}{k!}.$
ⓘ Symbols: ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{a_{1},\dots,a_{p}};\NVar{b_{1},\dots,b_% {q}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{a_{1},\dots,a_{p}}\atop\NVar{b_{1},% \dots,b_{q}}};\NVar{z}\right)$ : alternatively ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{\mathbf{b}}};% \NVar{z}\right)$ generalized hypergeometric function, ${\left(\NVar{a}\right)_{\NVar{n}}}$ : Pochhammer’s symbol (or shifted factorial), $!$ : factorial (as in $n!$ ), $p$ : nonnegative integer, $q$ : nonnegative integer, $z$ : complex variable, $a,a_{1},\ldots,a_{p}$ : real or complex parameters and $b,b_{1},\ldots,b_{q}$ : real or complex parameters Referenced by: §10.16, §10.16, §10.39, §16.2(iv), §16.2(ii), §16.2(iii), §16.2(iii), §16.2(iii), §16.5, §18.17(v), §18.17(vi), §18.17(vii), §18.20(ii), §18.26(i), §18.30(i), §18.38(ii) Permalink: http://dlmf.nist.gov/16.2.E1 Encodings: TeX, pMML, png See also: Annotations for §16.2(i), §16.2 and Ch.16

Equivalently, the function is denoted by ${{}_{p}F_{q}}\left({\mathbf{a}\atop\mathbf{b}};z\right)$ or ${{}_{p}F_{q}}\left(\mathbf{a};\mathbf{b};z\right)$ , and sometimes, for brevity, by ${{}_{p}F_{q}}\left(z\right)$ .

§16.2(ii) Case $p\leq q$

ⓘ

Keywords:: analytic properties, generalized hypergeometric functions
Referenced by:: §18.34(i), §2.10(iii), §7.11
Permalink:: http://dlmf.nist.gov/16.2.ii
See also:: Annotations for §16.2 and Ch.16

When $p\leq q$ the series (16.2.1) converges for all finite values of $z$ and defines an entire function.

§16.2(iii) Case $p=q+1$

ⓘ

Keywords:: analytic properties, generalized hypergeometric functions, principal branch (value), terminating
Notes:: See Luke (1975, §5.2.1) and Slater (1966, §2.2).
Referenced by:: §16.5
Permalink:: http://dlmf.nist.gov/16.2.iii
See also:: Annotations for §16.2 and Ch.16

Suppose first one or more of the top parameters $a_{j}$ is a nonpositive integer. Then the series (16.2.1) terminates and the generalized hypergeometric function is a polynomial in $z$ .

If none of the $a_{j}$ is a nonpositive integer, then the radius of convergence of the series (16.2.1) is $1$ , and outside the open disk $|z|<1$ the generalized hypergeometric function is defined by analytic continuation with respect to $z$ . The branch obtained by introducing a cut from $1$ to $+\infty$ on the real axis, that is, the branch in the sector $|\operatorname{ph}\left(1-z\right)|\leq\pi$ , is the principal branch (or principal value) of ${{}_{q+1}F_{q}}\left(\mathbf{a};\mathbf{b};z\right)$ ; compare §4.2(i). Elsewhere the generalized hypergeometric function is a multivalued function that is analytic except for possible branch points at $z=0,1$ , and $\infty$ . Unless indicated otherwise it is assumed that in the DLMF generalized hypergeometric functions assume their principal values.

On the circle $|z|=1$ the series (16.2.1) is absolutely convergent if $\Re\gamma_{q}>0$ , convergent except at $z=1$ if $-1<\Re\gamma_{q}\leq 0$ , and divergent if $\Re\gamma_{q}\leq-1$ , where

16.2.2		$\gamma_{q}=(b_{1}+\dots+b_{q})-(a_{1}+\dots+a_{q+1}).$
ⓘ Symbols: $q$ : nonnegative integer, $a,a_{1},\ldots,a_{p}$ : real or complex parameters and $b,b_{1},\ldots,b_{q}$ : real or complex parameters Permalink: http://dlmf.nist.gov/16.2.E2 Encodings: TeX, pMML, png See also: Annotations for §16.2(iii), §16.2 and Ch.16

§16.2(iv) Case $p>q+1$

ⓘ

Keywords:: analytic properties, generalized hypergeometric functions
Notes:: See Luke (1975, §5.2.1).
Referenced by:: §13.6(vi), §18.34(i)
Permalink:: http://dlmf.nist.gov/16.2.iv
See also:: Annotations for §16.2 and Ch.16

Polynomials

ⓘ

Keywords:: generalized hypergeometric functions, polynomial cases, terminating
See also:: Annotations for §16.2(iv), §16.2 and Ch.16

In general the series (16.2.1) diverges for all nonzero values of $z$ . However, when one or more of the top parameters $a_{j}$ is a nonpositive integer the series terminates and the generalized hypergeometric function is a polynomial in $z$ . Note that if $-m$ is the value of the numerically largest $a_{j}$ that is a nonpositive integer, then the identity

16.2.3		${{}_{p+1}F_{q}}\left({-m,\mathbf{a}\atop\mathbf{b}};z\right)=\frac{{\left(% \mathbf{a}\right)_{m}}(-z)^{m}}{{\left(\mathbf{b}\right)_{m}}}{{}_{q+1}F_{p}}% \left({-m,1-m-\mathbf{b}\atop 1-m-\mathbf{a}};\frac{(-1)^{p+q}}{z}\right)$
ⓘ Symbols: ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{a_{1},\dots,a_{p}};\NVar{b_{1},\dots,b_% {q}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{a_{1},\dots,a_{p}}\atop\NVar{b_{1},% \dots,b_{q}}};\NVar{z}\right)$ : alternatively ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{\mathbf{b}}};% \NVar{z}\right)$ generalized hypergeometric function, ${\left(\NVar{a}\right)_{\NVar{n}}}$ : Pochhammer’s symbol (or shifted factorial), $p$ : nonnegative integer, $q$ : nonnegative integer and $z$ : complex variable Referenced by: §13.6(v) Permalink: http://dlmf.nist.gov/16.2.E3 Encodings: TeX, pMML, png See also: Annotations for §16.2(iv), §16.2(iv), §16.2 and Ch.16

can be used to interchange $p$ and $q$ .

Note also that any partial sum of the generalized hypergeometric series can be represented as a generalized hypergeometric function via

16.2.4		$\sum_{k=0}^{m}\frac{{\left(\mathbf{a}\right)_{k}}}{{\left(\mathbf{b}\right)_{k% }}}\frac{z^{k}}{k!}=\frac{{\left(\mathbf{a}\right)_{m}}z^{m}}{{\left(\mathbf{b% }\right)_{m}}m!}{{}_{q+2}F_{p}}\left({-m,1,1-m-\mathbf{b}\atop 1-m-\mathbf{a}}% ;\frac{(-1)^{p+q+1}}{z}\right).$
ⓘ Symbols: ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{a_{1},\dots,a_{p}};\NVar{b_{1},\dots,b_% {q}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{a_{1},\dots,a_{p}}\atop\NVar{b_{1},% \dots,b_{q}}};\NVar{z}\right)$ : alternatively ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{\mathbf{b}}};% \NVar{z}\right)$ generalized hypergeometric function, ${\left(\NVar{a}\right)_{\NVar{n}}}$ : Pochhammer’s symbol (or shifted factorial), $!$ : factorial (as in $n!$ ), $p$ : nonnegative integer, $q$ : nonnegative integer and $z$ : complex variable Permalink: http://dlmf.nist.gov/16.2.E4 Encodings: TeX, pMML, png See also: Annotations for §16.2(iv), §16.2(iv), §16.2 and Ch.16

Non-Polynomials

ⓘ

See also:: Annotations for §16.2(iv), §16.2 and Ch.16

See §16.5 for the definition of ${{}_{p}F_{q}}\left(\mathbf{a};\mathbf{b};z\right)$ as a contour integral when $p>q+1$ and none of the $a_{k}$ is a nonpositive integer. (However, except where indicated otherwise in the DLMF we assume that when $p>q+1$ at least one of the $a_{k}$ is a nonpositive integer.)

§16.2(v) Behavior with Respect to Parameters

ⓘ

Keywords:: analytic properties, as functions of parameters, generalized hypergeometric functions
Notes:: The statement that follows (16.2.5) follows from the uniform convergence of (16.2.5) when $p\leq q$ , and also when $p=q+1$ provided that $|z|<1$ . For other values of $z$ , apply the straightforward generalization (to higher-order differential equations) of Theorem 3.2 in Olver (1997b, Chapter 5).
Permalink:: http://dlmf.nist.gov/16.2.v
See also:: Annotations for §16.2 and Ch.16

Let

16.2.5		${{}_{p}{\mathbf{F}}_{q}}\left(\mathbf{a};\mathbf{b};z\right)=\ifrac{{{}_{p}F_{% q}}\left({a_{1},\dots,a_{p}\atop b_{1},\dots,b_{q}};z\right)}{\left(\Gamma% \left(b_{1}\right)\cdots\Gamma\left(b_{q}\right)\right)}=\sum_{k=0}^{\infty}% \frac{{\left(a_{1}\right)_{k}}\cdots{\left(a_{p}\right)_{k}}}{\Gamma\left(b_{1% }+k\right)\cdots\Gamma\left(b_{q}+k\right)}\frac{z^{k}}{k!};$
ⓘ Defines: ${{}_{\NVar{p}}{\mathbf{F}}_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}% };\NVar{z}\right)$ or ${{}_{\NVar{p}}{\mathbf{F}}_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{% \mathbf{b}}};\NVar{z}\right)$ : scaled (or Olver’s) generalized hypergeometric function Symbols: $\Gamma\left(\NVar{z}\right)$ : gamma function, ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{a_{1},\dots,a_{p}};\NVar{b_{1},\dots,b_% {q}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{a_{1},\dots,a_{p}}\atop\NVar{b_{1},% \dots,b_{q}}};\NVar{z}\right)$ : alternatively ${{}_{\NVar{p}}F_{\NVar{q}}}\left(\NVar{\mathbf{a}};\NVar{\mathbf{b}};\NVar{z}\right)$ or ${{}_{\NVar{p}}F_{\NVar{q}}}\left({\NVar{\mathbf{a}}\atop\NVar{\mathbf{b}}};% \NVar{z}\right)$ generalized hypergeometric function, ${\left(\NVar{a}\right)_{\NVar{n}}}$ : Pochhammer’s symbol (or shifted factorial), $!$ : factorial (as in $n!$ ), $p$ : nonnegative integer, $q$ : nonnegative integer, $z$ : complex variable, $a,a_{1},\ldots,a_{p}$ : real or complex parameters and $b,b_{1},\ldots,b_{q}$ : real or complex parameters Referenced by: §16.2(v) Permalink: http://dlmf.nist.gov/16.2.E5 Encodings: TeX, pMML, png See also: Annotations for §16.2(v), §16.2 and Ch.16

compare (15.2.2) in the case $p=2$ , $q=1$ . When $p\leq q+1$ and $z$ is fixed and not a branch point, any branch of ${{}_{p}{\mathbf{F}}_{q}}\left(\mathbf{a};\mathbf{b};z\right)$ is an entire function of each of the parameters $a_{1},\dots,a_{p},b_{1},\dots,b_{q}$ .

16.1 Special Notation 16.3 Derivatives and Contiguous Functions

Site Privacy Accessibility Privacy Program Copyrights Vulnerability Disclosure No Fear Act Policy FOIA Environmental Policy Scientific Integrity Information Quality Standards Commerce.gov Science.gov USA.gov

§16.2 Definition and Analytic Properties

Contents

§16.2(i) Generalized Hypergeometric Series

§16.2(ii) Case $p\leq q$

§16.2(iii) Case $p=q+1$

§16.2(iv) Case $p>q+1$

Polynomials

Non-Polynomials

§16.2(v) Behavior with Respect to Parameters

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!

§16.2 Definition and Analytic Properties

Contents

§16.2(i) Generalized Hypergeometric Series

§16.2(ii) Case p≤q

§16.2(iii) Case p=q+1

§16.2(iv) Case p>q+1

Polynomials

Non-Polynomials

§16.2(v) Behavior with Respect to Parameters

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!

§16.2(ii) Case $p\leq q$

§16.2(iii) Case $p=q+1$

§16.2(iv) Case $p>q+1$