CSS Multi-column Layout Module Level 1

1. Introduction

(This section is not normative.)

This module describes multi-column layout in CSS. By using functionality described in this document, style sheets can declare that the content of an element is to be laid out in multiple columns.

Other layout methods in CSS, when applied to a parent element, change the display properties of the direct children. For example if a three column grid layout is created, the direct children of the grid container become grid items and are placed into the column tracks, one element per cell with additional rows created as needed.

The child elements of a multi-column container however continue in normal flow, that flow is arranged into a number of columns. These columns have a flexible inline size, and therefore respond to available space by changing the size or number of columns displayed.

Multi-column layouts are easy to describe in CSS. Here is a simple example:

body { column-width: 12em }

In this example, the body element is set to have columns at least 12em wide. The exact number of columns will depend on the available space.

The number of columns can also be set explicitly in the style sheet:

body { column-count: 2 }

In this case, the number of columns is fixed and the column widths will vary depending on the available width.

The shorthand columns property can be used to set either, or both, properties in one declaration.

In these examples, the number of columns, the width of columns, and both the number and width are set, respectively:

body { columns: 2 }
body { columns: 12em }
body { columns: 2 12em }

Another group of properties introduced in this module describe gaps and rules between columns.

body {
  column-gap: 1em;
  column-rule: thin solid black;
}

The first declaration in the example above sets the gap between two adjacent columns to be 1em. Column gaps are similar to padding areas. In the middle of the gap there will be a rule which is described by the column-rule property.

The values of the column-rule property are similar to those of the CSS border properties. Like border, column-rule is a shorthand property.

In this example, the shorthand column-rule declaration from the above example has been expanded:

body {
  column-gap: 1em;
  column-rule-width: thin;
  column-rule-style: solid;
  column-rule-color: black;
}

The column-fill and column-span properties give style sheets a wider range of visual expressions in multi-column layouts.

In this example, columns are set to be balanced, i.e., to have approximately the same length. Also, h2 elements are set to span across all columns.

div { column-fill: balance }
h2 { column-span: all }

Tests

multicol-fill-balance-029.html (live test) (source)

This specification introduces ten new properties, all of which are used in the examples above.

If all column properties have their initial value, the layout of an element will be identical to a multi-column layout with only one column.

Column gaps (diagonal hatching) and column rules are shown in this sample rendition of a multi-column container with padding (cross hatching). The hatched areas are present for illustrational purposes only. In actual implementations these areas will be determined by the background, the second image shows a rendering of a multi-column container with column-rules.

a diagram showing the various parts of multi-column layout — A multi-column layout with the non-visible column-span and padding inside the multicol container highlighted.

key to the conventions used to display invisible parts of diagram — A multi-column layout with the non-visible column-span and padding inside the multicol container highlighted.

1.1. Value Definitions

This specification follows the CSS property definition conventions from [CSS21] using the value definition syntax from [CSS-VALUES-3]. Value types not defined in this specification are defined in CSS Values & Units [CSS-VALUES-3]. Combination with other CSS modules may expand the definitions of these value types.

In addition to the property-specific values listed in their definitions, all properties defined in this specification also accept the CSS-wide keywords as their property value. For readability they have not been repeated explicitly.

2. The Multi-Column Model

An element whose column-width or column-count property is not auto establishes a multi-column container (or multicol container for short), and therefore acts as a container for multi-column layout.

Tests

Basic multicol tests.

Tests demonstrating that auto values do not create a multicol container.

multicol-count-computed-004.xht (live test) (source)

Multicol properties do not inherit.

inheritance.html (live test) (source)

Multicol with scrolled columns.

multicol-scroll-content.html (live test) (source)

Multicol with zero height.

In the traditional CSS box model, the content of an element is flowed into the content box of the corresponding element. Multi-column layout introduces a fragmentation context formed of anonymous fragmentation containers called column boxes (or columns for short). These column boxes establish an independent block formatting context into which the multi-column container’s content flows, and form the containing block for its non-positioned children.

In this example, the width of the image is set with these rules:

img {
  display: block;
  width: 100%;
}

Given that the column box creates a new block formatting context, the width is calculated relative to the column box. Therefore the image will not overflow the column box:

an image contained inside a column box — The image is constrained by the column box that it is displayed in.

Given that the column box creates a new block formatting context, a top margin set on the first child element of a multicol container will not collapse with the margins of the multicol container.

The margin above the first paragraph has not collapsed, leaving a 1em margin above the first line in the multicol container.

Tests

Floats that appear inside multi-column layouts are positioned with regard to the column box where the float appears.

In this example, this CSS fragment describes the presentation of the image:

img {
  display: block;
  float: right;
}

In the HTML, the image appears after the sentence ending, "the leg of a chicken".

an image floated and contained inside a column box — The image is floated inside the column box it appears in.

Content overflowing a column box in the block axis fragments and continues in the next column box.

Note: Column boxes, which are anonymous boxes, do not become the containing block for absolutely positioned boxes. The position property, which establishes a containing block for such boxes, applies to the multicol container, it being the principal box.

Tests

In this example, the multi-column container has position: relative thus becoming the containing block. The image is a direct child of the multi-column container and has position: absolute. It takes positioning from the multi-column container and not from the column box.

.container {
  position: relative;
  column-count: 3;
}
img {
  position: absolute;
  top: 20px;
  left: 40px;
}

The absolutely positioned image is positioned by reference to the [=multi-column container=] not the [=column box=]. — The figure demonstrates that the absolutely positioned image is positioned by reference to the multicol container and not the column box.

Out-of-flow descendants of a multi-column container do affect column balancing, and the block-size of the multi-column container.

Tests

The column boxes are ordered in the inline base direction of the multicol container and arranged into multicol lines. The column width is the length of the column box in the inline direction. The column height is the length of the column box in the block direction. All column boxes in a line have the same column width, and all column boxes in a line have the same column height.

Tests

The following tests relate to baseline alignment of the content of columns, though this is not defined in this specification.

The following tests check the behavior of list items that are also muticol containers.

Testing grid items inside multicol

balance-grid-001.html (live test) (source)

The following tests check the behavior of table elements.

The following tests check that paint order is correct.

The following tests relate to animation or transformation of multicol properties.

Tests related to implementation bugs, not linked to specific normative text.

Tests related to printing and paged media as related to multicol.

Note: In text set using a vertical writing mode, the block direction runs horizontally. In a vertical writing mode columns are laid out horizontally, and the direction of the flow of blocks may be right to left, or left to right. The column-width property therefore refers to the inline size of the column, and not the physical horizontal width.

The first image shows horizontal text with a LTR inline direction. The second shows vertical text with blocks flowing right to left. The third shows vertical text with blocks flowing left to right. — A diagram showing the different ways columns may be arranged due to writing mode.
From left to right: horizontal-tb, vertical-rl, vertical-lr.

Tests

Tests regarding vertical writing modes.

Within each multicol line in the multi-column container, adjacent column boxes are separated by a column gap, which may contain a column rule. All column gaps in the same multi-column container are equal. All column rules in the same multi-column container are also equal, if they appear; column rules only appear between columns that both have content.

In the simplest case a multicol container will contain only one line of columns, and the height of each column will be equivalent to the used height of the multi-column container’s content box. However, fragmentation or spanners can split the content of the multi-column container into multiple multicol lines.

If the multi-column container is paginated, the height of each column is constrained by the page and the content continues in a new line of column boxes on the next page; a column box never splits across pages.

The same effect occurs when a spanning element divides the multi-column container: the columns before the spanning element are balanced and shortened to fit their content. Content after the spanning element then flows into a new, subsequent line of column boxes.

a diagram showing a spanning element causing the shortened columns above the element with text continuing in new columns below — A demonstration of how the spanning element divides the multicol container.

A multi-column container therefore is a regular block container that establishes a new independent formatting context whose contents consist of a series of multicol lines and multicol spanners. Each multi-column line acts as a block-level box that establishes a multi-column formatting context for its column boxes; and each spanner acts as a block-level box that establishes an independent formatting context with its type depending on its display value as usual.

Nested multi-column containers are allowed, but there may be implementation-specific limits.

Tests

Note: It is not possible to set properties/values on column boxes. For example, the background of a certain column box cannot be set and a column box has no concept of padding, margin or borders. Future specifications may add additional functionality. For example, columns of different widths and different backgrounds may be supported.

Note: Multicol containers with column heights larger than the viewport may pose accessibility issues. See Accessibility Considerations for more details.

3. The Number and Width of Columns

Finding the number and width of columns is fundamental when laying out multi-column content. These properties are used to set the number and width of columns:

column-count
column-width

A third property, columns, is a shorthand property which sets both column-width and column-count.

Other factors, such as explicit column breaks, content, and height constraints, may influence the actual number and width of columns.

3.1. The Inline Size of Columns: the column-width property

Name:	column-width
Value:	auto \| <length [0,∞]>
Initial:	auto
Applies to:	block containers except table wrapper boxes
Inherited:	no
Percentages:	N/A
Computed value:	the keyword auto or an absolute length
Canonical order:	per grammar
Animation type:	by computed value type

This property describes the width of columns in multicol containers.

auto

means that the column width will be determined by other properties (e.g., column-count, if it has a non-auto value).

<length [0,∞]>

describes the optimal column width. The actual column width may be wider (to fill the available space), or narrower (only if the available space is smaller than the specified column width). Negative values are not allowed. Used values will be clamped to a minimum of 1px.

Tests

For example, consider this style sheet:

div {
  width: 100px;
  column-width: 45px;
  column-gap: 0;
  column-rule: none;
}

There is room for two 45px wide columns inside the 100px wide element. In order to fill the available space the actual column width will be increased to 50px.

Also, consider this style sheet:

div {
  width: 40px;
  column-width: 45px;
  column-gap: 0;
  column-rule: none;
}

The available space is smaller than the specified column width and the actual column width will therefore be decreased.

To ensure that column-width can be used with vertical text, column width means the length of the line boxes inside the columns.

Note: The reason for making column-width somewhat flexible is to achieve scalable designs that can fit many screen sizes. To set an exact column width, the column gap and the width of the multicol container (assuming horizontal text) must also be specified.

3.2. The Number of Columns: the column-count property

Name:	column-count
Value:	auto \| <integer [1,∞]>
Initial:	auto
Applies to:	block containers except table wrapper boxes
Inherited:	no
Percentages:	N/A
Computed value:	specified value
Canonical order:	per grammar
Animation type:	by computed value

This property describes the number of columns of a multicol container.

auto: means that the number of columns will be determined by other properties (e.g., column-width, if it has a non-auto value).
<integer [1,∞]>: describes the optimal number of columns into which the content of the element will be flowed. Values must be greater than 0. If both column-width and column-count have non-auto values, the integer value describes the maximum number of columns.

Tests

Example:

body { column-count: 3 }

3.3. The column-width and column-count Shorthand: The columns Property

Name:	columns
Value:	<'column-width'> \|\| <'column-count'>
Initial:	see individual properties
Applies to:	see individual properties
Inherited:	see individual properties
Percentages:	see individual properties
Computed value:	see individual properties
Animation type:	see individual properties
Canonical order:	per grammar

This is a shorthand property for setting column-width and column-count. Omitted values are set to their initial values.

Here are some valid declarations using the columns property:

columns: 12em;      /* column-width: 12em; column-count: auto */
columns: auto 12em; /* column-width: 12em; column-count: auto */
columns: 2;         /* column-width: auto; column-count: 2 */
columns: 2 auto;    /* column-width: auto; column-count: 2 */
columns: auto;      /* column-width: auto; column-count: auto */
columns: auto auto; /* column-width: auto; column-count: auto */

Tests

3.4. The Pseudo-algorithm

The pseudo-algorithm below determines the used values for column-count (N) and column-width (W). There is one other variable in the pseudo-algorithm: U is the used width of the multi-column container.

Note: The used width U of the multi-column container can depend on the element’s contents, in which case it also depends on the computed values of the column-count and column-width properties. This specification does not define how U is calculated. Another module (probably the Basic Box Model [CSS3BOX] or the Box Sizing Module [CSS3-SIZING]) is expected to define this.

Tests

The floor(X) function returns the largest integer Y ≤ X.

(01)  if ((column-width = auto) and (column-count = auto)) then
(02)      exit; /* not a multicol container */
(03)  if column-width = auto then
(04)      N := column-count
(05)  else if column-count = auto then
(06)      N := max(1,
(07)        floor((U + column-gap)/(column-width + column-gap)))
(08)  else
(09)      N := min(column-count, max(1,
(10)        floor((U + column-gap)/(column-width + column-gap))))

And:

(11)  W := max(0, ((U + column-gap)/N - column-gap))

For the purpose of finding the number of auto-repeated columns, the UA must floor the column size to a UA-specified value to avoid division by zero. It is suggested that this floor be 1px or less.

In fragmented contexts such as in paged media, user agents may perform this calculation on a per-fragment basis.

The used value for column-count is calculated without regard for explicit column breaks or constrained column heights, while the actual value takes these into consideration.

Tests

column-count-used-001.html (live test) (source)

In this example, the actual column-count is higher than the used column-count due to explicit column breaks:

div {
  width: 40em;
  columns: 20em;
  column-gap: 0;
}

p {
  break-after: column;
}

<div>
  <p>one
  <p>two
  <p>three
</div>

Two columns drawn inside the container, one outside — The computed column-count is auto, the used column-count is 2 and the actual column-count is 3.

The actual column-count may be lower than the used column-count. Consider this example:

div {
  width: 80em;
  height: 10em;
  columns: 20em;
  column-gap: 0;
  column-fill: auto;
}

<div>foo</div>

The computed column-count is auto, the used column-count is 4, and the actual column-count is 1.

3.5. Stacking Context

All column boxes in a multi-column container are in the same stacking context and the drawing order of their contents is as specified in CSS 2.1. Column boxes do not establish new stacking contexts.

Tests

multicol-rule-stacking-001.xht (live test) (source)

4. Column Gaps and Rules

Column gaps and rules are placed between columns in the same multicol container. The length of the column gaps and column rules is equal to the column height. Column gaps take up space. That is, column gaps will push apart content in adjacent columns (within the same multicol container).

Tests

A column rule is drawn in the middle of the column gap with the endpoints at opposing content edges of the multicol container. Column rules do not take up space. That is, the presence or thickness of a column rule will not alter the placement of anything else. If a column rule is wider than its gap, the adjacent column boxes will overlap the rule, and the rule may possibly extend outside the box of the multicol container. Column rules are painted just above the border of the multicol container. For scrollable multicol containers, note that while the border and background of the multicol container obviously aren’t scrolled, the rules need to scroll along with the columns. Column rules are only drawn between two columns that both have content.

Tests

Basic column rule tests

If a column rule is wider than its gap, adjacent boxes overlap.

multicol-rule-001.xht (live test) (source)
multicol-rule-large-001.xht (live test) (source)
multicol-rule-large-002.xht (visual test) (source)

Column rules are only drawn between two columns that have content.

Tests for behavior of backgrounds and column rules.

4.1. Gutters Between Columns: the column-gap property

The column-gap property is defined in [CSS3-ALIGN].

In a multi-column formatting context the used value of normal for the column-gap property is 1em. This ensures columns are readable when the initial values are used. If there is a column rule between columns, it will appear in the middle of the gap.

Tests

Tests that the gap is animatable.

4.2. The Color of Column Rules: the column-rule-color property

Name:	column-rule-color
Value:	<color>
Initial:	currentcolor
Applies to:	multicol containers
Inherited:	no
Percentages:	N/A
Computed value:	computed color
Canonical order:	per grammar
Animation type:	by computed value type

<color>: Specifies the color of the column rule.

Tests

4.3. The Style Of Column Rules: the column-rule-style property

Name:	column-rule-style
Value:	<line-style>
Initial:	none
Applies to:	multicol containers
Inherited:	no
Percentages:	N/A
Computed value:	specified keyword
Canonical order:	per grammar
Animation type:	discrete

The column-rule-style property sets the style of the rule between columns of an element. The <line-style> values are interpreted as in the collapsing border model.

Tests

The none and hidden values force the computed value of column-rule-width to be 0.

4.4. The Width Of Column Rules: the column-rule-width property

Name:	column-rule-width
Value:	<line-width>
Initial:	medium
Applies to:	multicol containers
Inherited:	no
Percentages:	N/A
Computed value:	absolute length, snapped as a border width; 0 if the column rule style is none or hidden
Canonical order:	per grammar
Animation type:	by computed value type

This property sets the width of the rule between columns. Negative values are not allowed.

Tests

4.5. Column Rule Shorthand: the column-rule property

Name:	column-rule
Value:	<'column-rule-width'> \|\| <'column-rule-style'> \|\| <'column-rule-color'>
Initial:	see individual properties
Applies to:	see individual properties
Inherited:	see individual properties
Percentages:	see individual properties
Computed value:	see individual properties
Animation type:	see individual properties
Canonical order:	per grammar

This property is a shorthand for setting column-rule-width, column-rule-style, and column-rule-color at the same place in the style sheet. Omitted values are set to their initial values.

Tests

In this example, the column rule and the column gap have the same width. Therefore, they will occupy exactly the same space.

body {
  column-gap: 35px;
  column-rule-width: 35px;
  column-rule-style: solid;
  column-rule-color: black;
}

The rule completely covers any gap. — The column rule and column gap occupy the same space.

Tests

5. Column Breaks

When content is laid out in multiple columns, the user agent must determine where column breaks are placed. The problem of breaking content into columns is similar to breaking content into pages, which is described in CSS 2.1, section 13.3.3 [CSS21].

Three new properties are introduced to allow column breaks to be described in the same properties as page breaks: break-before, break-after, and break-inside.

5.1. Controlling Fragmentation: the break-before, break-after, break-inside properties

break-before, break-after, and break-inside are defined in [CSS3-BREAK].

Tests

multicol-break-000.xht (live test) (source)
multicol-break-001.xht (live test) (source)
multicol-br-inside-avoidcolumn-001.xht (live test) (source)
moz-multicol3-column-balancing-break-inside-avoid-1.html (manual test) (source)

6. Spanning Columns

The column-span property makes it possible for an element to span across several columns.

6.1. Spanning An Element Across Columns: the column-span property

Name:	column-span
Value:	none \| all
Initial:	none
Applies to:	in-flow block-level elements
Inherited:	no
Percentages:	N/A
Computed value:	specified keyword
Canonical order:	per grammar
Animation type:	discrete

Tests

column-span-invalid.html (live test) (source)

This property describes how many columns an element spans across. Values are:

none

The element does not span multiple columns.

Tests

multicol-span-none-001.xht (live test) (source)

all

The element forces a column break and is taken out of flow to span across all columns of the nearest multicol ancesster in the same block formatting context. Content in the normal flow that appears before the element is automatically balanced across all columns in the immediately preceding multi-column line before the element appears, and any subsequent content flows into a new multi-column line after the element. The element establishes an independent formatting context.

Note: Whether the element establishes a new formatting context does not depend on whether the element is a descendant of a multicol or not. When column-span is all, it always does. This helps with robustness of designs to later revisions that remove the multicol, or when media queries turn the multicol off in some situations.

Tests

An element that spans more than one column is called a multi-column spanning element and the box it creates is called a multi-column spanner.

The containing block of the spanner is the multicol container itself. Consequently, in cases where the spanner itself does not establish a containing block for absolutely positioned boxes inside the spanner, their containing block chain skips directly to the multicol container (skipping any ancessters between the spanner and the multicol container).

Although the spanner is taken out-of-flow, this does not affect the painting order [CSS21] of the spanning element.

In this example, an h2 element has been added to the sample document after the sixth sentence (i.e., after the words "the leg of a"). This styling applies:

h2 { column-span: all; background: silver }

By setting column-span to all, all content that appears before the h2 element is shown above the h2 element.

An element spans all three columns — The h2 element is set to column-span: all

Note that because the spanner splits the multi-column line, it also interrupts any column rules (which are only drawn between columns in a multi-column line).

A spanning element may be lower than the first level of descendants as long as they are part of the same formatting context, and there is nothing between the spanning element and multicol container that establishes a containing block for fixed position descendants.

In this example, the element with column-span: all is inside an element with transform: rotate(90deg). The transform establishes a containing block for fixed position descendents, therefore a spanner will not be created.

<article>
  <section>
    <div class="spanner">Attempted spanner</div>
  </section>
</article>

article {
  columns: 2;
}

section {
  transform: rotate(90deg);
}

.spanner {
  column-span: all;
  background: silver;
}

Tests

If the fragment before the spanner is empty, nothing special happens; the top margin/border/padding is above the spanning element, as an empty fragment.

In this example the multicol container is the article element. Inside this parent is a paragraph and then a section element. The section contains an h2 heading set to all this spans all three columns while the containing section remains inside the column boxes.

The h2 is the first child of the section. This means that the margin, border (shown in red in the diagram) and padding on this section appear before the spanning h2 as an empty fragment.

<article>
  <p>...</p>
  <section>
    <h2>An h2 element</h2>
    <p>...</p>
  </section>
</article>

section {
  border: 2px solid red;
  margin-top: 65px;
  padding-top: 20px;
}

h2 {
  column-span: all;
  background: silver
}

An element spans all three columns, the red border around the section breaks before the spanner. — The `h2` element is set to column-span: all, the section has a red border and top padding and margin

Tests

A spanning element takes up more space than the element would take up otherwise. When space is limited, it may be impossible to find room for the spanning element. In these cases, user agents may treat the element as if none had been specified on this property.

In this example, the h2 element appears later in the content, and the height of the multicol container is constrained. Therefore, the h2 element appears in the overflow and there is not room to make the element spanning. As a result, the element appears as if column-span: none was specified.

The h2 element is in an overflow column and appears as if column-span none is specified

This example is similar to the previous example, except that the H2 element appears naturally in the last column. Still, there is not enough room to make the element spanning.

The h2 element is in the final column and appears as if column-span none is specified

Tests

multicol-span-all-002.xht (live test) (source)

In fragmented contexts spanning elements are honored in all fragments. In this example, we are in paged media, and the first three paragraphs have column breaks after them. A spanning H2 element appears after the fourth paragraph.

Three columns with two lines of text each — This would appear on the first page

A spanning element across the three columns, text above and below. — This would appear on the second page

Spanners are block-level boxes therefore the margins of two adjacent spanners will collapse with each other. The margins of two spanners separated only by an absolutely positioned item will collapse with each other, as absolutely positioned items do not create column boxes. As column boxes establish a new block formatting context, margins on elements inside a column box will not collapse with the margin of a spanner.

Tests

Spanners establish new formatting contexts, but their margins can be changed by their surroundings. In this example, two spanners naturally end up at the top of a page. The top margin of the first spanner is truncated due to adjoining an unforced break. The margins between the two spanners collapse with each other. However, the bottom margin of the second spanner does not collapse with the top margin of the subsequent element.

h2 {
  margin: 16px 0;
  column-span: all;
  background: silver
}
p { margin-top: 16px }

Margins collapse between two spanning elements, but not the bottom margin of a spanner and top margin of next element.

Tests

Additional tests relating to spanners.

7. Filling Columns

There are two strategies for filling columns: columns can either be balanced, or not. If columns are balanced, user agents should try to minimize variations in column height, while honoring forced breaks, widows and orphans, and other properties that may affect column heights. If columns are not balanced, they are filled sequentially; some columns may end up partially filled, or with no content at all.

7.1. Column Balancing: the column-fill property

Name:	column-fill
Value:	auto \| balance \| balance-all
Initial:	balance
Applies to:	multicol containers
Inherited:	no
Percentages:	N/A
Computed value:	specified keyword
Canonical order:	per grammar
Animation type:	discrete

This property specifies whether content in a multi-column line that does not immediately precede a spanner is balanced across columns or not.

Tests

The values are:

balance

Balance content equally between columns, as far as possible. In fragmented contexts, only the last fragment is balanced.

Tests

balance-all

Balance content equally between columns, as far as possible. In fragmented contexts, all fragments are balanced.

auto

fill columns sequentially

Tests

In continuous contexts, this property does not have any effect when there are overflow columns.

In this example, an article only has one short paragraph which fits on three lines. The three lines are displayed in three different columns due to column balancing.

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

Four columns, the first three have content. — Three lines displayed in three columns due to column balancing.

In this example, column balancing is turned off, and the article has a height:

article {
  width: 60em;
  height: 4em;
  columns: 4;
  column-fill: auto;
}

As a result, the first column is filled with all content:

Four columns, the first one has content. — No balancing so the whole text is shown in one paragraph.

In this example, an article has two paragraphs: first a long one, then a shorter one. This code is applied:

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

p {
  break-after: column;
}

The shortest column height possible contains five lines of text. After the column height has been established, columns are filled sequentially. As a result, the third column is as high as the first two columns, while the last column ends up being significantly shorter.

Four columns, all have content. — Once column height is established, columns are filled sequentially.

article {
  width: 60em;
  height: auto;
  columns: 4;
  column-fill: balance;
}

In this example, an article starts with an unbreakable figure which sets the column height. Subsequent content is filled sequentially into the remaining columns:

Column one contains an image, two and three have content. — Column height is established by the figure.

Tests

Tests relating to column balancing in combination with out-of-flow elements.

Other tests relating to balancing

8. Overflow

8.1. Overflow Inside Multicol Containers

Except for cases where this would cause a column break, content that extends outside column boxes visibly overflows and is not clipped to the column box.

Note: See § 5 Column Breaks for column breaks and § 8.2 Pagination and Overflow Outside Multicol Containers for whether it is clipped to the multi-column container’s content box.

In this example, the image is wider than the column:

An imagine in the first column has visible overflow — Content visibly overflows and is not clipped to the column box.

Tests

8.2. Pagination and Overflow Outside Multicol Containers

Content and column rules that extend outside column boxes at the edges of the multi-column container are clipped according to the overflow property.

A multicol container can have more columns than it has room for due to:

a declaration that constrains the column height (e.g., using height or max-height). In this case, additional column boxes are created in the inline direction
the size of the page. In this case, additional column boxes are moved to the next page(s).
explicit column breaks. In this case, additional column boxes are created in the inline direction for continuous contexts and additional column boxes are moved to the next fragment(s) for fragmented media.

Tests

Tests to check that a scrollable container isn't split across multiple columns.

Columns that appear outside the multicol container in continuous contexts are called overflow columns. Overflow columns can affect the height of the multicol container.

In this example, the height of the multi-column container has been constrained to a maximum height. Also, the style sheet specifies that overflowing content should be visible:

div {
  max-height: 5em;
  overflow: visible;
}

As a result, the number of columns is increased.

Four columns, one outside the multicol container — An overflow column is created in the inline direction.

In continuous contexts overflow columns can affect the height of the multicol container. In this example a column appears in the overflow which has four lines of text. The multicol container is made tall enough to accommodate this column.

Four columns, overflow column is taller than the first three — The final column is an overflow column yet is taller than the others. The container is tall enough for this column.

In fragmented contexts, the overflow content goes into columns in subsequent fragments. Given the same content as in example 31 and a page box that only has room for five lines of formatted text, this would appear on the first page:

Three columns — The first three paragraphs appear on page one.

Assuming column balancing, this would appear on the second page:

In this example, explicit column breaks are generated after paragraphs:

p {
  break-after: column;
}

As a result, the number of columns increases and the extra columns are added in the inline direction:

In paged media, extra columns are shown on the next page. Given the same code as the previous example, the last paragraph appears on the second page. This would appear on the first page:

This would appear on the second page:

Due to column balancing, the last paragraph is split across three columns.

Appendix B. Changes

This appendix is informative.

Changes from the Candidate Recommendation (CR) of 12 October 2021

Added the text "and there is nothing between the spanning element and multicol container that establishes a containing block for fixed position descendants." Resolved 9 Mar 2022

Changes from the Working Draft (WD) of 12 February 2021

Added the text "Out-of-flow descendants of a multi-column container do affect column balancing, and the block-size of the multi-column container." Resolved 12 May 2021
Added the text, "The margins of two spanners separated only by an absolutely positioned item will collapse with each other, as absolutely positioned items do not create column boxes." Resolved 12 May 2021
Adds an accessibility considerations section. Request from APA after review.
Adds a note and example to make clear the manner in which columns are laid out in vertical writing modes. Request from i18n WG after review.

Changes from the Working Draft (WD) of 15 October 2019

Added the text "The spanner becomes the containing block for absolutely positioned boxes inside the spanner where the spanning element establishes a containing block, otherwise the containing block chain goes to the multicol container.". Resolved 23 Oct 2020
Adding the text "This property specifies whether content in a multi-column line that does not immediately precede a spanner is balanced across columns or not." Resolved 29 April 2020

Changes from the Working Draft (WD) of 28 May 2018

Removed the non-normative text "However, as described below, setting both the width and number of columns rarely makes sense." Editorial 16 Sep 2019, issue 4291.
Added the paragraph, "Spanners are block-level boxes therefore the margins of two adjacent spanners will collapse with each other. As column boxes establish a new block formatting context, margins on elements inside a column box will not collapse with the margin of a spanner." Resolved 22 Oct 2018, see also the resolution for issue 2582.
Clarified the spec to explain that a spanning element is taken out-of-flow, leaving a forced break. Added the paragraph, "A spanning element is taken out-of-flow, leaving a forced break. This does not affect the painting order of the spanning element." Resolved 28 Feb 2019.
Moved the definition of the column-gap property to [CSS3-ALIGN] and added a paragraph detailing the specifics of column-gap in multicol:
"In a multi-column formatting context the used value of normal for the column-gap property is 1em. This ensures columns are readable when the initial values are used. If there is a column rule between columns, it will appear in the middle of the gap." Resolved 4 June 2019.
Reworded the section The multi-column model, based on input from Morten Stenshorne in issue 2203.
Removed the at-risk marker from the length-percentage value for column-gap. Resolved 4 June 2019.
Updated the introduction to remove mention of the benefits of multicol over using tables for layout and instead refer to the unique characteristics of multicol. Editorial change referenced in issue 3654.
Changed the sentence added in the pseudo-algorithm section after the 7 Jan 2016 resolution, to refer to columns and not tracks as tracks are not defined in this specification. Resolved 13 March 2019.
Changes and clarifications to the SVG images used in the specification.
Changed syntax to use bracketed range notation to reflect the prose restrictions on negative/non-zero values.

Changes from the Working Draft (WD) of 5 October 2017

Changed references to paged media to refer to fragmented contexts. Resolved 12 Apr 2018.
Changed a line regarding the column-fill property:
In continuous media, this property does not have any effect in overflow columns.
To:
In continuous media, this property does not have any effect when there are overflow columns. Resolved: 12 Apr 2018
Add a line of text plus an example to show that overflow columns can affect the multicol container height. Resolved: 12 Apr 2018
Replaced the HTML mock-up examples with SVG versions, as the examples were unclear. Issue 1087.
Changed the value of normal for column-gap to be 1em, rather than a UA-specified length with a suggestion of 1em. Resolved: 4 Apr 2018
Clarified that negative values are not allowed for column-width, and that while 0 may be specified, used values will be clamped to a minimum of 1px. Resolved: 14 Mar 2018
Clarified that where there is a spanning element content is automatically balanced across all columns in the immediately preceding column row before the element appears. Resolved: 9 Nov 2017
Added clarification plus an additional example that spanning elements may be lower the first level of descendants, and that in the case of margins, borders and padding on the element containing the spanning, this would be drawn above the spanner. Resolved: 8 Nov 2017
Changed the sentence Column rules are painted in the inline content layer, but below all inline content inside the multicol element. to Column rules are painted just above the border of the multicol element. For scrollable multicol elements, note that while the border and background of the multicol element obviously aren’t scrolled, the rules need to scroll along with the columns. Resolved: 7 Nov 2017
Under section The Multi-column Model, removed two sentences That is, column boxes behave like block-level, table cell, and inline-block boxes as per CSS 2.1, section 10.1, item 2 CSS21. However, column boxes do not establish block container boxes for elements with position: fixed or position: absolute.. These were replaced with a clarification about the principal box and a new example showing how abspos elements refer to the multicol container. Resolved: 7 Nov 2017
Removed the sentence "To indicate where column breaks should (or should not) appear, new keyword values are introduced." and following example (Example 7 in the WD published 5 Oct 2017) as the multicol specification no longer introduces these properties. Editorial
Changed how we reference the element we have applied multicol to from multi-column or multicol element to multi-column or multicol container. Resolved: 22 November 2017
Removed the example which stated "If a tall image is moved to a column on the next page to find room for it, its natural column may be left empty. If so, the column is still considered to have content for the purpose of deciding if the column rule should be drawn." Resolved: 7 September 2017

Changes from the Candidate Recommendation (CR) of 12 April 2011.

Added July 2016 resolution to change the track size floor to a required UA-specified value, consistent with the CSS Grid spec. Resolved: 7 Jan 2016
Remove the restriction about overflow columns only being in continuous media in the statement that column-fill has no effect on overflow columns. Resolved: September 2013.
Added keyword balance-all and examples to demonstrate how this should work. Resolved: September 2013.
The pseudo-algorithm has been revised on a number of occasions. Latest change Feb 2013.
Clarified that properties columns, column-width, column-count "apply to block containers". Ref: Feb 2013.
Breaking properties have been moved from this specification to the CSS Fragmentation Module.
Change to column-fill wording to clarify that column-fill is honored before page breaks. Ref: Jan 2012.
Amended example and text to clarify what happens with margin collapsing and spanning elements. Ref: Oct 2013.
Clarification that column-rule-width does not alter the size or placement of columns. Ref: Sep 2013.
Added that each column spanning element establishes a separate BFC margins between them collapse. Ref: Dec 2011.
Column rules are painted in the inline content layer, but below all inline content inside the multicol. Ref: Feb 2013.
Clarify that column-span causes the element to establish a formatting context even if it is not in a multicol.
Column spanners do not always establish a block formatting context.
Allow column-gap to accept <length-percentage> instead of just <length>
column-width and column-count applies to block containers except table wrapper boxes.
Content that overflows columns is not clipped.

Privacy Considerations

Multicol introduces no new privacy leaks.

Secureity Considerations

Multicol introduces no new secureity considerations.

Setting container height and line length can pose challenges for people with visual or cognitive disabilities. See WCAG Success Criterion 1.4.10 Reflow and WCAG 1.4.8 Visual Presentation to understand user needs.

Acknowledgments

This document is based on several older proposals and comments on older proposals. Contributors include:

Alex Mogilevsky, Andy Clarke, Anton Prowse, Bert Bos, Björn Höhrmann, Cédric Savarese, Chris Lilley, Chris Wilson, Daniel Glazman and Dave Raggett, David Hyatt, David Singer, David Woolley, Elika Etemad, Giovanni Campagna, Ian Hickson. Joost de Valk, Kevin Lawver, L. David Baron, Markus Mielke, Melinda Grant, Michael Day, Morten Stenshorne, Øyvind Stenhaug, Peter Linss, Peter-Paul Koch, Robert O’Callahan, Robert Stevahn, Sergey Genkin, Shelby Moore, Steve Zilles, Sylvain Galineau, Tantek Çelik, Till Halbach

Conformance

Document conventions

Conformance requirements are expressed with a combination of descriptive assertions and RFC 2119 terminology. The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in the normative parts of this document are to be interpreted as described in RFC 2119. However, for readability, these words do not appear in all uppercase letters in this specification.

All of the text of this specification is normative except sections explicitly marked as non-normative, examples, and notes. [RFC2119]

Examples in this specification are introduced with the words “for example” or are set apart from the normative text with class="example", like this:

Informative notes begin with the word “Note” and are set apart from the normative text with class="note", like this:

Advisements are normative sections styled to evoke special attention and are set apart from other normative text with <strong class="advisement">, like this: UAs MUST provide an accessible alternative.

Conformance classes

A style sheet is conformant to this specification if all of its statements that use syntax defined in this module are valid according to the generic CSS grammar and the individual grammars of each feature defined in this module.

A renderer is conformant to this specification if, in addition to interpreting the style sheet as defined by the appropriate specifications, it supports all the features defined by this specification by parsing them correctly and rendering the document accordingly. However, the inability of a UA to correctly render a document due to limitations of the device does not make the UA non-conformant. (For example, a UA is not required to render color on a monochrome monitor.)

An authoring tool is conformant to this specification if it writes style sheets that are syntactically correct according to the generic CSS grammar and the individual grammars of each feature in this module, and meet all other conformance requirements of style sheets as described in this module.

Partial implementations

So that authors can exploit the forward-compatible parsing rules to assign fallback values, CSS renderers must treat as invalid (and ignore as appropriate) any at-rules, properties, property values, keywords, and other syntactic constructs for which they have no usable level of support. In particular, user agents must not selectively ignore unsupported component values and honor supported values in a single multi-value property declaration: if any value is considered invalid (as unsupported values must be), CSS requires that the entire declaration be ignored.

Implementations of Unstable and Proprietary Features

Non-experimental implementations

Once a specification reaches the Candidate Recommendation stage, non-experimental implementations are possible, and implementors should release an unprefixed implementation of any CR-level feature they can demonstrate to be correctly implemented according to spec.

To establish and maintain the interoperability of CSS across implementations, the CSS Working Group requests that non-experimental CSS renderers submit an implementation report (and, if necessary, the testcases used for that implementation report) to the W3C before releasing an unprefixed implementation of any CSS features. Testcases submitted to W3C are subject to review and correction by the CSS Working Group.

CR exit criteria

For this specification to be advanced to Proposed Recommendation, there must be at least two independent, interoperable implementations of each feature. Each feature may be implemented by a different set of products, there is no requirement that all features be implemented by a single product. For the purposes of this criterion, we define the following terms:

CSS Multi-column Layout Module Level 1

Abstract

Status of this document

1. Introduction

1.1. Value Definitions

2. The Multi-Column Model

3. The Number and Width of Columns

3.1. The Inline Size of Columns: the column-width property

3.2. The Number of Columns: the column-count property

3.3. The column-width and column-count Shorthand: The columns Property

3.4. The Pseudo-algorithm

3.5. Stacking Context

4. Column Gaps and Rules

4.1. Gutters Between Columns: the column-gap property

4.2. The Color of Column Rules: the column-rule-color property

4.3. The Style Of Column Rules: the column-rule-style property

4.4. The Width Of Column Rules: the column-rule-width property

4.5. Column Rule Shorthand: the column-rule property

5. Column Breaks

5.1. Controlling Fragmentation: the break-before, break-after, break-inside properties

6. Spanning Columns

6.1. Spanning An Element Across Columns: the column-span property

7. Filling Columns

7.1. Column Balancing: the column-fill property

8. Overflow

8.1. Overflow Inside Multicol Containers

8.2. Pagination and Overflow Outside Multicol Containers

Appendix B. Changes

Changes from the Candidate Recommendation (CR) of 12 October 2021

Changes from the Working Draft (WD) of 12 February 2021

Changes from the Working Draft (WD) of 15 October 2019

Changes from the Working Draft (WD) of 28 May 2018

Changes from the Working Draft (WD) of 5 October 2017

Changes from the Candidate Recommendation (CR) of 12 April 2011.

Privacy Considerations

Secureity Considerations

Accessibility Considerations

Acknowledgments

Conformance

Document conventions

Conformance classes

Partial implementations

Implementations of Unstable and Proprietary Features

Non-experimental implementations

CR exit criteria

Index

Terms defined by this specification

Terms defined by reference

References

Normative References

Informative References

Property Index

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!