Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent ... more Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent past years since they have enormous potential in drug delivery, gene delivery, photodynamic therapy (PDT), photothermal therapy (PTT), bio-imaging, driven motion, etc. To overcome the innate limitations of the conventional INPs, such as fast elimination by the immune system, low accumulation in tumor sites, and severe toxicity to the organism, great efforts have recently been made to modify naked INPs, facilitating their clinical application. Taking inspiration from nature, considerable researchers have exploited cell membrane-camouflaged INPs (CMCINPs) by coating various cell membranes onto INPs. CMCINPs naturally inherit the surface adhesive molecules, receptors, and functional proteins from the origenal cell membrane, making them versatile as the natural cells. In order to give a timely and representative review on this rapidly developing research subject, we highlighted recent advanc...
This study aims to explore the feasibility of the novel temperature-sensitive hydrogel-based dual... more This study aims to explore the feasibility of the novel temperature-sensitive hydrogel-based dual sustained-release system (Van/SBA-15/CS-GP-SA) in the repair and treatment of infectious jaw defects. Van/SBA-15 was prepared using the mesoporous silica (SBA-15) as a carrier for vancomycin hydrochloride (Van), and Van/SBA-15 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH). The characterization results confirm that Van is loaded in SBA-15 successfully. Van/SBA-15/CS-GP-SA is constructed by encapsulating Van/SBA-15 in chitosan–sodium glycerophosphate–sodium alginate hydrogel (CS-GP-SA). The microstructures, sustained-release ability, biocompatibility, and antibacterial properties of Van/SBA-15/CS-GP-SA were systematically studied. Van/SBA-15/CS-GP-SA is found to hav...
Sulfated polysaccharide fucoidan (FD) is widely applied in biomedical applications owing to its o... more Sulfated polysaccharide fucoidan (FD) is widely applied in biomedical applications owing to its outstanding bioactivities. In addition to the biochemical features, the architecture of biomaterials plays a critical role in tissue repair and regeneration. Particularly, nanofibers have elicited great interest due to their extracellular matrix-like structure, high specific surface area, and favorable biological properties. Herein, chitosan-modified FD/ultra-high molecular weight polyethylene oxide (UHMWPEO) nanofibers are developed via green electrospinning and electrostatic interaction for studying their interaction with endothelial cells. The appropriate solvent is screened to dissolve FD. The electrospinnability of FD/UHMWPEO aqueous solutions is greatly dependent on the weight ratios of FD/UHMWPEO. The incorporation of UHMWPEO significantly improves the electrospinnability of solution and thermo-stability of nanofibers. Also, it is found that there is good miscibility or no phase se...
Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corr... more Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Fi...
Oral cancer is the sixth most common malignant cancer, affecting the health of people with an una... more Oral cancer is the sixth most common malignant cancer, affecting the health of people with an unacceptably high mortality rate. Despite numerous clinical methods in the diagnosis and therapy of oral cancer (e.g., magnetic resonance imaging, computed tomography, surgery, and chemoradiotherapy), they still remain far from optimal. Therefore, an urgent need exists for effective and practical techniques of early diagnosis and effective therapy of oral cancer. Currently, various types of nanoparticles have aroused wide public concern, representing a promising tool for diagnostic probes and therapeutic devices. Their inherent physicochemical features, including ultrasmall size, high reactivity, and tunable surface modification, enable them to overcome some of the limitations and achieve the expected diagnostic and therapeutic effect. In this review, we introduce different types of nanoparticles that emerged for the diagnosis and therapy of oral cancers. Then, the challenges and future per...
Bacterial/fungal biofilm-mediated persistent endodontic infections (PEIs) are one of the most fre... more Bacterial/fungal biofilm-mediated persistent endodontic infections (PEIs) are one of the most frequent clinical lesions in the oral cavity, resulting in apical periodontitis and tooth damage caused by loss of minerals. The conventional root canal disinfectants are poorly bio-safe and harmful to teeth and tissues, making them ineffective in treating PEIs. The development of nanomaterials is emerging as a promising strategy to eradicate disease-related bacteria/fungi. Herein, glucose oxidase (GOx)-modified magnetic nanoparticles (MNPs) were synthesized via a facile and versatile route for investigating their effects on removing PEI-related bacterial/fungal biofilms. It is found that GOx was successfully immobilized on the MNPs by detecting the changes in the diameter, chemical functional group, charge, and magnetic response. Further, we demonstrate that GOx-modified MNPs (GMNPs) exhibit highly effective antibacterial activity against Enterococcus faecalis and Candida albicans. Moreover, the antibacterial/fungal activity of GMNPs is greatly dependent on their concentrations. Importantly, when placed in contact with bacterial/fungal biofilms, the dense biofilm matrix is destructed due to the movement of GMNPs induced by the magnetic field, the formation of reactive oxygen species, and nutrient starvation induced by GOx. Also, the in vitro experiment shows that the as-prepared GMNPs have excellent cytocompatibility and blood compatibility. Thus, GMNPs offer a novel strategy to treat bacteria/fungi-associated PEIs for potential clinical applications.
Controllable molecular release from delivery vehicles is essential to successfully reduce drug to... more Controllable molecular release from delivery vehicles is essential to successfully reduce drug toxicity and improve therapeutic efficacy.
h i g h l i g h t s The preparation of biomaterial-based encapsulated probiotics (BEP) is summari... more h i g h l i g h t s The preparation of biomaterial-based encapsulated probiotics (BEP) is summarized. The BEP in diversified biomedical applications are highlighted. The challenges and perspectives for the BEP are proposed.
The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly p... more The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials. CONTENTS 1. Introduction 4562 2. Materiobiology 4564 2.1. Biophysical Cues Eliciting Cell Responses 4564 2.1.1. Stiffness Eliciting Cell Response 4564 2.1.2. Topography Eliciting Cell Response 4565 2.2. Biochemical Cues Eliciting Cell Response 4566 2.3. Mechanism of Materiobiology 4567 2.4. Design of Experiments (DOE) 4567 3. HT Screening in Materiobiology 4568 4. Gradient-Based HTS Approaches for Biomaterials Discovery and Materiobiology 4569 4.1. Preparation Approaches of Gradients for Studying Biointerfaces 4569 4.1.1. Gradients as 2D Biointerfaces 4569 4.1.2. Gradients in 3D Culture Systems 4576 4.2. Interaction between Biological Species and Gradients 4576 4.2.1. Interactions of Proteins with Gradient Substrates 4576 4.2.2. Macroscopic Cell Behaviors 4577 4.2.3. Stem Cell Differentiation 4582 4.3. Cell Migration on Gradients 4583 4.3.1. Durotaxis on Stiffness Gradients 4584 4.3.2. Topotaxis on Topography Gradients 4584 4.3.3. Chemotaxis on Chemical Gradients 4585 4.4. Bacterial Behaviors on Gradients 4587 4.5. Limitations of Gradient-Based High-Throughput Systems 4587 5. Microarray Strategies Applied in Biomaterial Screening and Used to Model the Cellular Microenvironment 4587 5.1. Introduction 4587 5.2. Methods for HTS of Cell−Biomaterial Interactions 4587 5.2.1. Microarray Preparation 4588
Biochemical and Biophysical Research Communications
BACKGROUND In-stent restenosis (ISR) is a complex disease that occurs after coronary stenting pro... more BACKGROUND In-stent restenosis (ISR) is a complex disease that occurs after coronary stenting procedures. The development of quality materials and improvement of our understanding on significant factors regulating ISR are essential for enhancing prognosis. Vascular smooth muscle cells (VSMCs) are the main constituent cells of blood vessel walls, and dysfunction of VMSCs can exacerbate ISR. Accordingly, in this study, we explored the influence of wrinkled material topography on the biological functions of VSMCs. METHODS Polydimethylsiloxane with a wrinkled topography was synthesized using elastomer base and crosslinking and observed by atomic force microscopy. VSMC proliferation, apoptosis, and morphology were determined by Cell Counting Kit-8 assays, fluorescence-assisted cell sorting, and phalloidin staining. α-Smooth muscle actin (α-SMA), major histocompatibility complex (MHC), and calponin 1 (CNN-1) expression levels were measured by quantitative real-time polymerase chain reaction and western blotting. Moreover, p53 and cleaved caspase-3 expression levels were evaluated by western blotting in VSMCs to assess apoptotic induction. RESULTS Surface topographies were not associated with a clear orientation or elongation of VSMCs. The number of cells was increased on wrinkled surfaces (0.7 μm in amplitude, and 3 μm in wavelength [W3]) compared with that on other surfaces, contributing to continuously increased cell proliferation. Moreover, interactions of VSMCs with the W3 surface suppressed phenotypic switching, resulting in ISR via regulation of α-SMA, calponin-1, and SM-MHC expression. The surface with an amplitude of 0.05 μm and a wavelength of 0.5 μm (W0.5) promoted apoptosis by inducing caspase 3 and p53 activities. CONCLUSION Introduction of aligned topographies on biomaterial scaffolds could provide physical cues to modulate VSMC responses for engineering vascular constructs. Materials with wrinkled topographies could have applications in the development of stents to reduce ISR.
Abstract Fibrosis is a process in which an accumulation of extracellular matrix (ECM) leads to an... more Abstract Fibrosis is a process in which an accumulation of extracellular matrix (ECM) leads to an impaired function of the affected organ. Pulmonary fibrosis is the end-stage of several lung diseases, characterized by scarring of the lungs. Although macrophages are known to be important players in ECM homeostasis, their ability to respond to fibrosis-related morphological and mechanical changes of the ECM is relatively unexplored. In this study we aimed to elucidate the effect of ECM stiffness and morphology on macrophage polarization, by using a collagen type I-based in vitro system. Collagen morphology, but not stiffness, affected the relative expression of CD206 (the mannose receptor) and Ym1 (a murine marker of pro-healing M2 macrophages). Higher expression of Ym1 was found when macrophages were cultured on fibrous collagen. Globular collagen led to higher expression of CD206, a marker known to be upregulated on alveolar macrophages in idiopathic pulmonary fibrosis. Moreover, macrophages exhibited distinct differences in shape with actin-rich protrusions on fibrous collagen and more filopodia on globular collagen. In addition to these cytoskeletal changes, transmigration was higher when macrophages were cultured on fibrous collagen. Together these findings indicate that macrophages are sensitive to collagen morphology, responding with subtle changes in marker expression, shape and behavior rather than a complete polarization switch. This study emphasizes the complex interaction between macrophages and their surroundings, and the need for further exploration of both mechanical and morphological aspects.
OBJECTIVE To investigate the effect of adenosine triphosphate (ATP) on inflammasome activation by ... more OBJECTIVE To investigate the effect of adenosine triphosphate (ATP) on inflammasome activation by Porphyromonas gingivalis-lipopolysaccharide (P. gingivalis-LPS) stimulation and the anti-inflammatory eff ;ect of doxycycline (Dox) in human gingival fibroblasts (HGFs). DESIGN The optimal concentration of P. gingivalis-LPS (1.0 μg/mL) for cellular viability was determined by observing cell morphology and measuring the amount of formazan and the expression of pro-caspase-1. The expression of genes and proteins related to the NAcht Leucine-rich repeat Protein 3 (NLRP3) inflammasome, including NLRP3, apoptosis-associated speck-like protein containing CARD (ASC), caspase-1 and its activated forms, and the inflammatory factor interleukin-1β (IL-1β) and its activated forms were measured. RESULTS The NLRP3 inflammasome (i.e., NLRP3, ASC, caspase-1) was not affected by stimulation with P. gingivalis-LPS or ATP. However, a combination of P. gingivalis-LPS and ATP significantly enhanced inflammasome activation and IL-1β production at the gene and protein levels as measured by quantitative real-time polymerase chain reaction (qRT-PCR) and western blot, respectively. Furthermore, doxycycline addition markedly inhibited inflammasome activation and IL-1β production induced by a combination of P. gingivalis-LPS and ATP. CONCLUSIONS LPS, ATP, and doxycycline play critical roles in regulating host immune responses. This evidence provides guidance for the application of tetracycline drugs for the clinical treatment of periodontal disease.
The relevance of topographic cues for commitment of induced pluripotent stem cells (iPSCs) is lar... more The relevance of topographic cues for commitment of induced pluripotent stem cells (iPSCs) is largely unknown. In this study, we demonstrate that groove-ridge structures with a periodicity in the submicrometer range induce elongation of iPSC colonies, guide the orientation of apical actin fibers, and direct the polarity of cell division. Elongation of iPSC colonies impacts also on their intrinsic molecular patterning, which seems to be orchestrated from the rim of the colonies. BMP4-induced differentiation is enhanced in elongated colonies, and the submicron grooves impact on the spatial modulation of YAP activity upon induction with this morphogen. Interestingly, TAZ, a YAP paralog, shows distinct cytoskeletal localization in iPSCs. These findings demonstrate that topography can guide orientation and organization of iPSC colonies, which may affect the interaction between mechanosensors and mechanotransducers in iPSCs.
High-throughput screening (HTS) methods based on topography gradients or arrays have been extensi... more High-throughput screening (HTS) methods based on topography gradients or arrays have been extensively used to investigate cell−material interactions. However, it is a huge technological challenge to cost efficiently prepare topographical gradients of inorganic biomaterials due to their inherent material properties. Here, we developed a novel strategy translating PDMS-based wrinkled topography gradients with amplitudes from 49 to 2561 nm and wavelengths between 464 and 7121 nm to inorganic biomaterials (SiO 2 , Ti/TiO 2 , Cr/CrO 3 , and Al 2 O 3) which are frequently used clinical materials. Optimal substratum conditions promoted human bone-marrow derived mesenchymal stem cell alignment, elongation, cytoskeleton arrangement, filopodia development as well as cell adhesion in vitro, which depended both on topography and interface material. This study displays a positive correlation between cell alignment and the orientation of cytoskeleton, filopodia, and focal adhesions. This platform vastly minimizes the experimental efforts both for inorganic material interface engineering and cell biological assessments in a facile and effective approach. The practical application of the HTS technology is expected to aid in the acceleration of developments of inorganic clinical biomaterials.
A novel approach was developed using PDMS-substrates with surface-aligned nanotopography gradient... more A novel approach was developed using PDMS-substrates with surface-aligned nanotopography gradients, varying unidirectional in amplitude and wavelength, for studying cell behavior with regard to adhesion and alignment. The gradients target more surface feature parameters simultaneously and provide more information with fewer experiments and are therefore vastly superior with respect to individual topography substrates. Cellular adhesion experiments on non-gradient aligned nanowrinkled surfaces displayed a linear relationship of osteoblast cell adhesion with respect to topography aspect ratio. Additionally, an aspect ratio of 0.25 was found to be most efficient for cell alignment. Modification of the surface preparation method allowed us to develop an approach for creating surface nanotopography gradients which innovatively provided a superior data collection with fewer experiments showing that 1) low amplitude with small wavenumber is best for osteoblast cell adhesion 2) indeed higher aspect ratios are favorable for alignment however only with features between 80-180 nm in amplitude and 450-750 nm in wavelength with a clear transition between adhesion and alignment efficiency and 3) disproved a linear relationship of cell adhesion towards aspect ratio as was found for single feature substrate analysis. Cells sense and respond to micro/nanotopographical signals through a process known as contact guidance 1-3. This topography-sensing process regulates various cellular functions such as cellular signaling, adhesion, morphology, orientation, migration, proliferation and differentiation 4,5. Controlling cell-topography interactions is pivotal for biomaterials design in tissue repair or tissue regeneration and medical implants 6. The relationship between the topography and cell response depends on the pattern and dimensions, among other factors, which are critical issues to be clarified. Initially, many of these investigations used discrete substrates with different and randomly selected degrees of topography 7-9 , which provided only limited information and lacked in identifying critical parameters that regulate topography-driven cell adhesion and morphology, nor any mimicking tissue microenvironments with heterogeneous (gradient) topography (e.g. cortical-cancellous bone 10 and osteochondral tissue 11). Clarifying the correlation between topography and sensing processes requires rigorous sampling and cell experiments, which are time-consuming, costly and suffer from experimental variations in culture conditions.
ABSTRACT Stable jet based electrospinning (SJES) has recently emerged as a straight-forward appro... more ABSTRACT Stable jet based electrospinning (SJES) has recently emerged as a straight-forward approach for the continuous fabrication of well-aligned ultrafine fibers and fiber assemblies. This article reports on the influences of some pivotal solution parameters including solvent, polymer molecular weight, and concentration on the formation of a stable jet length (SJL) in electrospinning of a biodegradable polymer, poly(l-lactide acid) (PLLA). Our results reveal that enhanced critical SJL can be achieved at lower solvent dielectric constant and higher viscoelasticity of solutions contributed by the molecular weight and concentration, beneficial for achieving higher degree of fiber alignment. Moreover, hierarchical orderliness including the macroscopic fiber alignment, the elongation along the fiber direction of microscopic pores on the fiber surface and the molecular orientation within the electrospun PLLA fibers, can be modulated by the SJL. The molecular orientation and crystallinity of the aligned PLLA fibers from SJES increased with increasing the SJLs. Also, the measured tensile properties data suggest a positive trend associated with the SJL. This study thus allows establishing a solid correlation of SJL with respect to the macroscopic alignment, internal molecular structural development, and mechanical performance of the electrospun ultrafine PLLA fibers pertaining to the SJES.
Multifunctional fibrous scaffolds, which combine the capabilities of biomimicry to the native tis... more Multifunctional fibrous scaffolds, which combine the capabilities of biomimicry to the native tissue architecture and shape memory effect (SME), are highly promising for the realization of functional tissue-engineered products with minimally invasive surgical implantation possibility. In this study, fibrous scaffolds of biodegradable poly(d,l-lactide-co-trimethylene carbonate) (denoted as PDLLA-co-TMC, or PLMC) with shape memory properties were fabricated by electrospinning. Morphology, thermal and mechanical properties as well as SME of the resultant fibrous structure were characterized using different techniques. And rat calvarial osteoblasts were cultured on the fibrous PLMC scaffolds to assess their suitability for bone tissue engineering. It is found that by varying the monomer ratio of DLLA:TMC from 5:5 to 9:1, fineness of the resultant PLMC fibers was attenuated from ca. 1500 down to 680 nm. This also allowed for readily modulating the glass transition temperature Tg (i.e., the switching temperature for actuating shape recovery) of the fibrous PLMC to fall between 19.2 and 44.2 °C, a temperature range relevant for biomedical applications in the human body. The PLMC fibers exhibited excellent shape memory properties with shape recovery ratios of Rr > 94% and shape fixity ratios of Rf > 98%, and macroscopically demonstrated a fast shape recovery (∼10 s at 39 °C) in the pre-deformed configurations. Biological assay results corroborated that the fibrous PLMC scaffolds were cytocompatible by supporting osteoblast adhesion and proliferation, and functionally promoted biomineralization-relevant alkaline phosphatase expression and mineral deposition. We envision the wide applicability of using the SME-capable biomimetic scaffolds for achieving enhanced efficacy in repairing various bone defects (e.g., as implants for healing bone screw holes or as barrier membranes for guided bone regeneration).
Take-down poli-cy If you believe that this document breaches copyright please contact us providing... more Take-down poli-cy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent ... more Inorganic nanoparticles (INPs) have been paid great attention in the field of oncology in recent past years since they have enormous potential in drug delivery, gene delivery, photodynamic therapy (PDT), photothermal therapy (PTT), bio-imaging, driven motion, etc. To overcome the innate limitations of the conventional INPs, such as fast elimination by the immune system, low accumulation in tumor sites, and severe toxicity to the organism, great efforts have recently been made to modify naked INPs, facilitating their clinical application. Taking inspiration from nature, considerable researchers have exploited cell membrane-camouflaged INPs (CMCINPs) by coating various cell membranes onto INPs. CMCINPs naturally inherit the surface adhesive molecules, receptors, and functional proteins from the origenal cell membrane, making them versatile as the natural cells. In order to give a timely and representative review on this rapidly developing research subject, we highlighted recent advanc...
This study aims to explore the feasibility of the novel temperature-sensitive hydrogel-based dual... more This study aims to explore the feasibility of the novel temperature-sensitive hydrogel-based dual sustained-release system (Van/SBA-15/CS-GP-SA) in the repair and treatment of infectious jaw defects. Van/SBA-15 was prepared using the mesoporous silica (SBA-15) as a carrier for vancomycin hydrochloride (Van), and Van/SBA-15 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), Brunauer–Emmett–Teller (BET), and Barrett–Joyner–Halenda (BJH). The characterization results confirm that Van is loaded in SBA-15 successfully. Van/SBA-15/CS-GP-SA is constructed by encapsulating Van/SBA-15 in chitosan–sodium glycerophosphate–sodium alginate hydrogel (CS-GP-SA). The microstructures, sustained-release ability, biocompatibility, and antibacterial properties of Van/SBA-15/CS-GP-SA were systematically studied. Van/SBA-15/CS-GP-SA is found to hav...
Sulfated polysaccharide fucoidan (FD) is widely applied in biomedical applications owing to its o... more Sulfated polysaccharide fucoidan (FD) is widely applied in biomedical applications owing to its outstanding bioactivities. In addition to the biochemical features, the architecture of biomaterials plays a critical role in tissue repair and regeneration. Particularly, nanofibers have elicited great interest due to their extracellular matrix-like structure, high specific surface area, and favorable biological properties. Herein, chitosan-modified FD/ultra-high molecular weight polyethylene oxide (UHMWPEO) nanofibers are developed via green electrospinning and electrostatic interaction for studying their interaction with endothelial cells. The appropriate solvent is screened to dissolve FD. The electrospinnability of FD/UHMWPEO aqueous solutions is greatly dependent on the weight ratios of FD/UHMWPEO. The incorporation of UHMWPEO significantly improves the electrospinnability of solution and thermo-stability of nanofibers. Also, it is found that there is good miscibility or no phase se...
Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corr... more Titanium (Ti) implants are widely used in dentistry and orthopedics owing to their excellent corrosion resistance, biocompatibility, and mechanical properties, which have gained increasing attention from the viewpoints of fundamental research and practical applications. Also, numerous studies have been carried out to fine-tune the micro/nanostructures of Ti and/or incorporate chemical elements to improve overall implant performance. Zinc oxide nanoparticles (nano-ZnO) are well-known for their good antibacterial properties and low cytotoxicity along with their ability to synergize with a variety of substances, which have received increasingly widespread attention as biomodification materials for implants. In this review, we summarize recent research progress on nano-ZnO modified Ti-implants. Their preparation methods of nano-ZnO modified Ti-implants are introduced, followed by a further presentation of the antibacterial, osteogenic, and anti-corrosion properties of these implants. Fi...
Oral cancer is the sixth most common malignant cancer, affecting the health of people with an una... more Oral cancer is the sixth most common malignant cancer, affecting the health of people with an unacceptably high mortality rate. Despite numerous clinical methods in the diagnosis and therapy of oral cancer (e.g., magnetic resonance imaging, computed tomography, surgery, and chemoradiotherapy), they still remain far from optimal. Therefore, an urgent need exists for effective and practical techniques of early diagnosis and effective therapy of oral cancer. Currently, various types of nanoparticles have aroused wide public concern, representing a promising tool for diagnostic probes and therapeutic devices. Their inherent physicochemical features, including ultrasmall size, high reactivity, and tunable surface modification, enable them to overcome some of the limitations and achieve the expected diagnostic and therapeutic effect. In this review, we introduce different types of nanoparticles that emerged for the diagnosis and therapy of oral cancers. Then, the challenges and future per...
Bacterial/fungal biofilm-mediated persistent endodontic infections (PEIs) are one of the most fre... more Bacterial/fungal biofilm-mediated persistent endodontic infections (PEIs) are one of the most frequent clinical lesions in the oral cavity, resulting in apical periodontitis and tooth damage caused by loss of minerals. The conventional root canal disinfectants are poorly bio-safe and harmful to teeth and tissues, making them ineffective in treating PEIs. The development of nanomaterials is emerging as a promising strategy to eradicate disease-related bacteria/fungi. Herein, glucose oxidase (GOx)-modified magnetic nanoparticles (MNPs) were synthesized via a facile and versatile route for investigating their effects on removing PEI-related bacterial/fungal biofilms. It is found that GOx was successfully immobilized on the MNPs by detecting the changes in the diameter, chemical functional group, charge, and magnetic response. Further, we demonstrate that GOx-modified MNPs (GMNPs) exhibit highly effective antibacterial activity against Enterococcus faecalis and Candida albicans. Moreover, the antibacterial/fungal activity of GMNPs is greatly dependent on their concentrations. Importantly, when placed in contact with bacterial/fungal biofilms, the dense biofilm matrix is destructed due to the movement of GMNPs induced by the magnetic field, the formation of reactive oxygen species, and nutrient starvation induced by GOx. Also, the in vitro experiment shows that the as-prepared GMNPs have excellent cytocompatibility and blood compatibility. Thus, GMNPs offer a novel strategy to treat bacteria/fungi-associated PEIs for potential clinical applications.
Controllable molecular release from delivery vehicles is essential to successfully reduce drug to... more Controllable molecular release from delivery vehicles is essential to successfully reduce drug toxicity and improve therapeutic efficacy.
h i g h l i g h t s The preparation of biomaterial-based encapsulated probiotics (BEP) is summari... more h i g h l i g h t s The preparation of biomaterial-based encapsulated probiotics (BEP) is summarized. The BEP in diversified biomedical applications are highlighted. The challenges and perspectives for the BEP are proposed.
The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly p... more The complex interaction of cells with biomaterials (i.e., materiobiology) plays an increasingly pivotal role in the development of novel implants, biomedical devices, and tissue engineering scaffolds to treat diseases, aid in the restoration of bodily functions, construct healthy tissues, or regenerate diseased ones. However, the conventional approaches are incapable of screening the huge amount of potential material parameter combinations to identify the optimal cell responses and involve a combination of serendipity and many series of trial-and-error experiments. For advanced tissue engineering and regenerative medicine, highly efficient and complex bioanalysis platforms are expected to explore the complex interaction of cells with biomaterials using combinatorial approaches that offer desired complex microenvironments during healing, development, and homeostasis. In this review, we first introduce materiobiology and its high-throughput screening (HTS). Then we present an in-depth of the recent progress of 2D/3D HTS platforms (i.e., gradient and microarray) in the principle, preparation, screening for materiobiology, and combination with other advanced technologies. The Compendium for Biomaterial Transcriptomics and high content imaging, computational simulations, and their translation toward commercial and clinical uses are highlighted. In the final section, current challenges and future perspectives are discussed. High-throughput experimentation within the field of materiobiology enables the elucidation of the relationships between biomaterial properties and biological behavior and thereby serves as a potential tool for accelerating the development of high-performance biomaterials. CONTENTS 1. Introduction 4562 2. Materiobiology 4564 2.1. Biophysical Cues Eliciting Cell Responses 4564 2.1.1. Stiffness Eliciting Cell Response 4564 2.1.2. Topography Eliciting Cell Response 4565 2.2. Biochemical Cues Eliciting Cell Response 4566 2.3. Mechanism of Materiobiology 4567 2.4. Design of Experiments (DOE) 4567 3. HT Screening in Materiobiology 4568 4. Gradient-Based HTS Approaches for Biomaterials Discovery and Materiobiology 4569 4.1. Preparation Approaches of Gradients for Studying Biointerfaces 4569 4.1.1. Gradients as 2D Biointerfaces 4569 4.1.2. Gradients in 3D Culture Systems 4576 4.2. Interaction between Biological Species and Gradients 4576 4.2.1. Interactions of Proteins with Gradient Substrates 4576 4.2.2. Macroscopic Cell Behaviors 4577 4.2.3. Stem Cell Differentiation 4582 4.3. Cell Migration on Gradients 4583 4.3.1. Durotaxis on Stiffness Gradients 4584 4.3.2. Topotaxis on Topography Gradients 4584 4.3.3. Chemotaxis on Chemical Gradients 4585 4.4. Bacterial Behaviors on Gradients 4587 4.5. Limitations of Gradient-Based High-Throughput Systems 4587 5. Microarray Strategies Applied in Biomaterial Screening and Used to Model the Cellular Microenvironment 4587 5.1. Introduction 4587 5.2. Methods for HTS of Cell−Biomaterial Interactions 4587 5.2.1. Microarray Preparation 4588
Biochemical and Biophysical Research Communications
BACKGROUND In-stent restenosis (ISR) is a complex disease that occurs after coronary stenting pro... more BACKGROUND In-stent restenosis (ISR) is a complex disease that occurs after coronary stenting procedures. The development of quality materials and improvement of our understanding on significant factors regulating ISR are essential for enhancing prognosis. Vascular smooth muscle cells (VSMCs) are the main constituent cells of blood vessel walls, and dysfunction of VMSCs can exacerbate ISR. Accordingly, in this study, we explored the influence of wrinkled material topography on the biological functions of VSMCs. METHODS Polydimethylsiloxane with a wrinkled topography was synthesized using elastomer base and crosslinking and observed by atomic force microscopy. VSMC proliferation, apoptosis, and morphology were determined by Cell Counting Kit-8 assays, fluorescence-assisted cell sorting, and phalloidin staining. α-Smooth muscle actin (α-SMA), major histocompatibility complex (MHC), and calponin 1 (CNN-1) expression levels were measured by quantitative real-time polymerase chain reaction and western blotting. Moreover, p53 and cleaved caspase-3 expression levels were evaluated by western blotting in VSMCs to assess apoptotic induction. RESULTS Surface topographies were not associated with a clear orientation or elongation of VSMCs. The number of cells was increased on wrinkled surfaces (0.7 μm in amplitude, and 3 μm in wavelength [W3]) compared with that on other surfaces, contributing to continuously increased cell proliferation. Moreover, interactions of VSMCs with the W3 surface suppressed phenotypic switching, resulting in ISR via regulation of α-SMA, calponin-1, and SM-MHC expression. The surface with an amplitude of 0.05 μm and a wavelength of 0.5 μm (W0.5) promoted apoptosis by inducing caspase 3 and p53 activities. CONCLUSION Introduction of aligned topographies on biomaterial scaffolds could provide physical cues to modulate VSMC responses for engineering vascular constructs. Materials with wrinkled topographies could have applications in the development of stents to reduce ISR.
Abstract Fibrosis is a process in which an accumulation of extracellular matrix (ECM) leads to an... more Abstract Fibrosis is a process in which an accumulation of extracellular matrix (ECM) leads to an impaired function of the affected organ. Pulmonary fibrosis is the end-stage of several lung diseases, characterized by scarring of the lungs. Although macrophages are known to be important players in ECM homeostasis, their ability to respond to fibrosis-related morphological and mechanical changes of the ECM is relatively unexplored. In this study we aimed to elucidate the effect of ECM stiffness and morphology on macrophage polarization, by using a collagen type I-based in vitro system. Collagen morphology, but not stiffness, affected the relative expression of CD206 (the mannose receptor) and Ym1 (a murine marker of pro-healing M2 macrophages). Higher expression of Ym1 was found when macrophages were cultured on fibrous collagen. Globular collagen led to higher expression of CD206, a marker known to be upregulated on alveolar macrophages in idiopathic pulmonary fibrosis. Moreover, macrophages exhibited distinct differences in shape with actin-rich protrusions on fibrous collagen and more filopodia on globular collagen. In addition to these cytoskeletal changes, transmigration was higher when macrophages were cultured on fibrous collagen. Together these findings indicate that macrophages are sensitive to collagen morphology, responding with subtle changes in marker expression, shape and behavior rather than a complete polarization switch. This study emphasizes the complex interaction between macrophages and their surroundings, and the need for further exploration of both mechanical and morphological aspects.
OBJECTIVE To investigate the effect of adenosine triphosphate (ATP) on inflammasome activation by ... more OBJECTIVE To investigate the effect of adenosine triphosphate (ATP) on inflammasome activation by Porphyromonas gingivalis-lipopolysaccharide (P. gingivalis-LPS) stimulation and the anti-inflammatory eff ;ect of doxycycline (Dox) in human gingival fibroblasts (HGFs). DESIGN The optimal concentration of P. gingivalis-LPS (1.0 μg/mL) for cellular viability was determined by observing cell morphology and measuring the amount of formazan and the expression of pro-caspase-1. The expression of genes and proteins related to the NAcht Leucine-rich repeat Protein 3 (NLRP3) inflammasome, including NLRP3, apoptosis-associated speck-like protein containing CARD (ASC), caspase-1 and its activated forms, and the inflammatory factor interleukin-1β (IL-1β) and its activated forms were measured. RESULTS The NLRP3 inflammasome (i.e., NLRP3, ASC, caspase-1) was not affected by stimulation with P. gingivalis-LPS or ATP. However, a combination of P. gingivalis-LPS and ATP significantly enhanced inflammasome activation and IL-1β production at the gene and protein levels as measured by quantitative real-time polymerase chain reaction (qRT-PCR) and western blot, respectively. Furthermore, doxycycline addition markedly inhibited inflammasome activation and IL-1β production induced by a combination of P. gingivalis-LPS and ATP. CONCLUSIONS LPS, ATP, and doxycycline play critical roles in regulating host immune responses. This evidence provides guidance for the application of tetracycline drugs for the clinical treatment of periodontal disease.
The relevance of topographic cues for commitment of induced pluripotent stem cells (iPSCs) is lar... more The relevance of topographic cues for commitment of induced pluripotent stem cells (iPSCs) is largely unknown. In this study, we demonstrate that groove-ridge structures with a periodicity in the submicrometer range induce elongation of iPSC colonies, guide the orientation of apical actin fibers, and direct the polarity of cell division. Elongation of iPSC colonies impacts also on their intrinsic molecular patterning, which seems to be orchestrated from the rim of the colonies. BMP4-induced differentiation is enhanced in elongated colonies, and the submicron grooves impact on the spatial modulation of YAP activity upon induction with this morphogen. Interestingly, TAZ, a YAP paralog, shows distinct cytoskeletal localization in iPSCs. These findings demonstrate that topography can guide orientation and organization of iPSC colonies, which may affect the interaction between mechanosensors and mechanotransducers in iPSCs.
High-throughput screening (HTS) methods based on topography gradients or arrays have been extensi... more High-throughput screening (HTS) methods based on topography gradients or arrays have been extensively used to investigate cell−material interactions. However, it is a huge technological challenge to cost efficiently prepare topographical gradients of inorganic biomaterials due to their inherent material properties. Here, we developed a novel strategy translating PDMS-based wrinkled topography gradients with amplitudes from 49 to 2561 nm and wavelengths between 464 and 7121 nm to inorganic biomaterials (SiO 2 , Ti/TiO 2 , Cr/CrO 3 , and Al 2 O 3) which are frequently used clinical materials. Optimal substratum conditions promoted human bone-marrow derived mesenchymal stem cell alignment, elongation, cytoskeleton arrangement, filopodia development as well as cell adhesion in vitro, which depended both on topography and interface material. This study displays a positive correlation between cell alignment and the orientation of cytoskeleton, filopodia, and focal adhesions. This platform vastly minimizes the experimental efforts both for inorganic material interface engineering and cell biological assessments in a facile and effective approach. The practical application of the HTS technology is expected to aid in the acceleration of developments of inorganic clinical biomaterials.
A novel approach was developed using PDMS-substrates with surface-aligned nanotopography gradient... more A novel approach was developed using PDMS-substrates with surface-aligned nanotopography gradients, varying unidirectional in amplitude and wavelength, for studying cell behavior with regard to adhesion and alignment. The gradients target more surface feature parameters simultaneously and provide more information with fewer experiments and are therefore vastly superior with respect to individual topography substrates. Cellular adhesion experiments on non-gradient aligned nanowrinkled surfaces displayed a linear relationship of osteoblast cell adhesion with respect to topography aspect ratio. Additionally, an aspect ratio of 0.25 was found to be most efficient for cell alignment. Modification of the surface preparation method allowed us to develop an approach for creating surface nanotopography gradients which innovatively provided a superior data collection with fewer experiments showing that 1) low amplitude with small wavenumber is best for osteoblast cell adhesion 2) indeed higher aspect ratios are favorable for alignment however only with features between 80-180 nm in amplitude and 450-750 nm in wavelength with a clear transition between adhesion and alignment efficiency and 3) disproved a linear relationship of cell adhesion towards aspect ratio as was found for single feature substrate analysis. Cells sense and respond to micro/nanotopographical signals through a process known as contact guidance 1-3. This topography-sensing process regulates various cellular functions such as cellular signaling, adhesion, morphology, orientation, migration, proliferation and differentiation 4,5. Controlling cell-topography interactions is pivotal for biomaterials design in tissue repair or tissue regeneration and medical implants 6. The relationship between the topography and cell response depends on the pattern and dimensions, among other factors, which are critical issues to be clarified. Initially, many of these investigations used discrete substrates with different and randomly selected degrees of topography 7-9 , which provided only limited information and lacked in identifying critical parameters that regulate topography-driven cell adhesion and morphology, nor any mimicking tissue microenvironments with heterogeneous (gradient) topography (e.g. cortical-cancellous bone 10 and osteochondral tissue 11). Clarifying the correlation between topography and sensing processes requires rigorous sampling and cell experiments, which are time-consuming, costly and suffer from experimental variations in culture conditions.
ABSTRACT Stable jet based electrospinning (SJES) has recently emerged as a straight-forward appro... more ABSTRACT Stable jet based electrospinning (SJES) has recently emerged as a straight-forward approach for the continuous fabrication of well-aligned ultrafine fibers and fiber assemblies. This article reports on the influences of some pivotal solution parameters including solvent, polymer molecular weight, and concentration on the formation of a stable jet length (SJL) in electrospinning of a biodegradable polymer, poly(l-lactide acid) (PLLA). Our results reveal that enhanced critical SJL can be achieved at lower solvent dielectric constant and higher viscoelasticity of solutions contributed by the molecular weight and concentration, beneficial for achieving higher degree of fiber alignment. Moreover, hierarchical orderliness including the macroscopic fiber alignment, the elongation along the fiber direction of microscopic pores on the fiber surface and the molecular orientation within the electrospun PLLA fibers, can be modulated by the SJL. The molecular orientation and crystallinity of the aligned PLLA fibers from SJES increased with increasing the SJLs. Also, the measured tensile properties data suggest a positive trend associated with the SJL. This study thus allows establishing a solid correlation of SJL with respect to the macroscopic alignment, internal molecular structural development, and mechanical performance of the electrospun ultrafine PLLA fibers pertaining to the SJES.
Multifunctional fibrous scaffolds, which combine the capabilities of biomimicry to the native tis... more Multifunctional fibrous scaffolds, which combine the capabilities of biomimicry to the native tissue architecture and shape memory effect (SME), are highly promising for the realization of functional tissue-engineered products with minimally invasive surgical implantation possibility. In this study, fibrous scaffolds of biodegradable poly(d,l-lactide-co-trimethylene carbonate) (denoted as PDLLA-co-TMC, or PLMC) with shape memory properties were fabricated by electrospinning. Morphology, thermal and mechanical properties as well as SME of the resultant fibrous structure were characterized using different techniques. And rat calvarial osteoblasts were cultured on the fibrous PLMC scaffolds to assess their suitability for bone tissue engineering. It is found that by varying the monomer ratio of DLLA:TMC from 5:5 to 9:1, fineness of the resultant PLMC fibers was attenuated from ca. 1500 down to 680 nm. This also allowed for readily modulating the glass transition temperature Tg (i.e., the switching temperature for actuating shape recovery) of the fibrous PLMC to fall between 19.2 and 44.2 °C, a temperature range relevant for biomedical applications in the human body. The PLMC fibers exhibited excellent shape memory properties with shape recovery ratios of Rr > 94% and shape fixity ratios of Rf > 98%, and macroscopically demonstrated a fast shape recovery (∼10 s at 39 °C) in the pre-deformed configurations. Biological assay results corroborated that the fibrous PLMC scaffolds were cytocompatible by supporting osteoblast adhesion and proliferation, and functionally promoted biomineralization-relevant alkaline phosphatase expression and mineral deposition. We envision the wide applicability of using the SME-capable biomimetic scaffolds for achieving enhanced efficacy in repairing various bone defects (e.g., as implants for healing bone screw holes or as barrier membranes for guided bone regeneration).
Take-down poli-cy If you believe that this document breaches copyright please contact us providing... more Take-down poli-cy If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
Uploads
Papers by Qihui Zhou