Peer Review Plan for Skin Notation Profile: Phenothiazine

At a glance

NIOSH created a peer review plan for a draft skin notation for phenothiazine. Skin notations are assessments of the available scientific information on the dermal hazard of workplace chemicals.

Overview

Updates

For more information about the development of skin notations see Current Intelligence Bulletin 61: A Strategy for Assigning New NIOSH Skin Notations.

For more information about the development of this draft document, see Request for Public Comment on Draft Skin Notation Profiles.

Title

Draft NIOSH Skin Notation Profile: Phenothiazine

Subject

An assessment of the available scientific information on the dermal hazard of this workplace chemical.

Purpose

To provide scientific information about the dermal hazard and NIOSH skin notation associated with this workplace chemical.

Review information

Timing of Review

November 2024 - February 2025

Primary Disciplines or Expertise Needed for Review

Toxicology, risk assessment, industrial hygiene, occupational medicine.

Type of Review

Individual letter

Number of Reviewers

2-4

Reviewers Selected by

CDC/NIOSH

Public Nominations Requested for Review Panel

No

Opportunities for the Public to Comment

Yes

Peer Reviewers Provided with Public Comments Before Their Review

No

Have OMB requirements been deferred or waived for this dissemination?

No

Will alternative peer review procedures be applied to this dissemination?

No

Peer Reviewers

To be determined

Charge to peer reviewers

  1. Does this document clearly outline the systemic health hazards associated with exposures of the skin to the chemical?
    1. If not, what specific information is missing from the document?
  2. If the SYS or SYS (FATAL) notations are assigned, are the rationale and logic behind the assignment clear?
    1. If not assigned, is the logic clear why it was not (e.g., insufficient data, no identified health hazard)?
    2. If not clear, what clarification is suggested?
  3. Does this document clearly outline the direct (localized) health hazards associated with exposures of the skin to the chemical?
    1. If not, what specific information is missing from the document?
  4. If the DIR, DIR (IRR), or DIR (COR) notations are assigned, are the rationale and logic behind the assignment clear?
    1. If not assigned, is the logic clear why it was not (e.g., insufficient data, no identified health hazard)?
    2. If not clear, what clarification is suggested?
  5. Does this document clearly outline the immune-mediated responses (allergic response) associated with exposures of the skin to the chemical?
    1. If not, what specific information is missing from the document?
  6. If the SEN notation is assigned, are the rationale and logic behind the assignment clear?
    1. If not assigned, is the logic clear why it was not assigned (e.g., insufficient data, no identified health hazard)?
    2. If not clear, what clarification is suggested?
  7. If the ID (SK) or SK were assigned, are the rationale and logic outlined clearly within the document?
    1. If not clear, what clarification is suggested?
  8. Are the conclusions supported by the data?
    1. If not, what changes are suggested?
  9. Are the tables clear and appropriate?
    1. If not, what changes are suggested?
  10. Are you aware of any scientific data reported in governmental publications, databases, peer-reviewed journals, or other sources that should be considered within this document?
    1. Please include the full reference citation for any additional scientific data to be considered.
  11. There have been considerable improvements and advancements in dermal absorption studies and modeling since the publication of NIOSH Current Intelligence Bulletin 61: A Strategy for Assigning New NIOSH Skin Notations [NIOSH 2017]. In response to expert external peer reviewers' comments regarding the limitation of the skin to inhalation dose (SI) ratio information, the SI ratio was removed from the individual skin notation profile documents.
    1. Do you have any information to support removing or including the SI ratio information in these NIOSH documents?