Mic-E TYPE CODES 16 Sep 2021 -------------------------------------------------------------------- See also www.aprs.org/aprs12/mic-e-examples.txt for formatting help! 16 Sep 21 - Added FT5D 26 May 20 - Added FTM-300D 4 Jun 19 - Added FT3D 31 Mar 19 - Added Anytone D878UV and D578UV 24 Aug 16 - added TH-D74 21 Jul 15 - added SCS GmbH & Co. KG 31 May 15 - added FT2D and FTM-100D 21 Aug 13 - added FTM-400DR and FT1D 26 Oct 11 - new Mic-E code T.....*v www.KissOZ.dk OZ1EKD and OZ7HVO 27 Jan 11 - add HinzTec anyfrog 3 Nov 10 - add D72 24 Mar 10 - add Yaesu VX-8G. And updated info on KWD D710 20 Oct 09 - add Yaesu FTM-350 21 Oct 08 - clarify and add notes on D710 present decoding 18 Aug 08 - reverse order of MFR and Version bytes: 15 Aug 08 - set up OTHER category and use ENDING bytes. 14 Jul 08 - original Old idea: T.......vM Prior to 18 August 08 New idea: T.......Mv allows more flexibiilty in use of "v" BACKGROUND: Before the formal APRS SPEC was written, there were only two Mic-E products in use. These were the original Mic-E prototype, and the TAPR Mic-E kit. While developing the SPEC for others, the two Kenwood radios, D7 and D700 were in development and so the first byte of the original free-text field was designated as a Mic-E TYPE identifier to identify different devices. This was written into the APRS spec. It is important that the type of Mic-E device be identified, since some may have very important distinct properties. For example we need to know which devices are message capable or not. In the future, we may want to know which models can auto-tune or not. ORIGINAL TYPE CODE: The first byte of the original free-field text was set-aside for use in indicating the type of Mic-E device. On page 55 of chapter 10 of the spec, the first two of these TYPE CODES ">" and "]" were defined for the D7 and D700. In addition, the statement was made: "It is envisioned that other Mic-E compatible devices will be allocated their own type-codes in the future." The future has arrived and the many thousands of existing APRS radios and APRS clients will recognize the D7 and D700's, but unfortunately, will not recognize anything with newer TYPE CODES without new software. And since many people use UIview which cannot be upgraded with new TYPE codes, we had to find a solution when Yaesu and others began considering new APRS radios and Mic-E implementations. 2008: Luckily, the original SPEC also allowed for two other special characters in that location, the (') apostrophe and the (`) grave accent. These were used by the original prototypes for additional BYTE wise analog telemetry fields. Since no one since the mid 1990's was using these, and since all EXISTING radios and clients would pass these (and only these) two other bytes, they were REDEFINED as a new MIC-E TYPE category called "OTHER Mic-E". The (`) character was defined to indicate a message capable Mic-E device and the (') apostrophe would identify Trackers only. D710 VERSION CODE: For backwards compatibility, the D710 uses the same "]" Type byte as the D700 but adds a special "=" byte on the end to distinguish the new radio. We will use the abbreviated syntax of ]......= to represent this Mic-E TYPE code and version code. The seven dots represent the free text field of the Mic-E format which can include the special "aaa}" altitude. VALID TYPE CODE AND VERSION CODES. For the purpose of this Mic-E update to the spec, the written format for the free-field text defined in the original APRS spec will be referred to as Mic-E TEXT FORMAT: "T......Mv". Where T is the Mic-E TYPE byte (" ",">","]","`","'") Where ........ is the free text portion of the format Where aaa}.... like: "Taaa}....Mv" is optional altitude Where "M" represents the Manufacturer Byte Where "v" represents a version Byte Using this definition, all of the following examples have been tested to work with existing D7 and D700 radios. The D710 after software version 2.01 also decodes them. The Yaesu VX-8R, VX-8G and FTM-350 as well as TH-D72 are compatible. LEGACY FORMATS: These formats are to be recognized always in all models now and in the future. Notice that it allows for future VERSION codes for the D7 and D700 series so that even without recognizing the new version code, the radio will be recognized as being in the D700 or D7 family. ....... Original Mic-E (leading space) (not message capable) >....... TH-D7A walkie Talkie TOCALL APK001 (message capable) >......v *future TH-D7A upgrade version ]....... TM-D700 MObile Radio TOCALL APK101 (message capable) ]......= TM-D710 Mobile Radio TOCALL APK201 (message capable) ]......v *future D7xx models version >......= TH-D72 HT (Oct 2010) TOCALL APK003 (message capable) >......^ TH-D74 HT (Aug 2016) TOCALL APK004 (message capable) NEW FORMATS FOR ALL FUTURE APPLICATIONS: (plus the exceptions above) `......Mv OTHER Mic-E - display "McE-msg" or "Mic-Emsg" '......Mv OTHER Mic-E - display "McE-trk" or "McTrackr" As combinations of "Mv" bytes are added to this table, manufacturers are encouraged to display the correct radio type if known. The following additional bytes have been declared: `......_b Yaesu VX-8 (b = SPACE) (message capable) `......_" Yaesu FTM-350 [new in Oct 2009] (message capable) `......_# Yaesu VX-8G [new in Mar 2010] (message capable) `......_$ Yaesu FT1D [New in Dec 2012] (message capable) `......_% Yaesu FTM-400DR [new in Aug 2013] (message capable) `......_) Yaesu FTM-100D [new in May 2015] (message capable) `......_( Yaesu FT2D [new in May 2015] (message capable) `......_0 Yaesu FT3D [new in Jun 2019] (message capable) `......_3 Yaesu FT5D [new in Aug 2021] (message capable) `......_1 Yaesu FTM-300D [New in 2020 (message capable) `...... X AP510 KD7LXL (not message capable spec violation) `......(5 Anytone D578UV [new in Jun 2019] (message capable) '......(8 Anytone D878UV [new in Jun 2019] (not msg capable) '......|3 Byonics TinyTrack3 (TT3) '......|4 Byonics TinyTrack4 (TT4) T......\v Hamhud ? (awaiting confirmation?) T....../v Argent ? (awaiting confirmation?) T......^v HinzTec anyfrog T......*v APOZxx www.KissOZ.dk Tracker. OZ1EKD and OZ7HVO '......:4 SCS GmbH & Co. P4dragon DR-7400 modems (no msgs capable) '......:8 SCS GmbH & Co. P4dragon DR-7800 modems (no msgs capable) T......~v OTHER (to be used when all other "M" MFR's are used up) Other manufacturer type codes could be as follows. If anyone intends to use any codes PLEASE check with WB4APR first to make sure you are universally compatible. T......`v T......'v T....../v T......\v T......-v T......:v T......;v T.......v It is important to choose ending MFR and Version bytes that will not cause confusion on the end of any random text. Designers of Mic-E type devices are encouraged to advise their intent to use a specific ENDING code (M) so that other designers can include them in their code for display. DELIMTER BYTE: As one last afterthought, if the MFR wants to really make sure that his "Mv" code on the end of any random text does not add confusion to the text, maybe we should consider preceeding it with a forced SPACE byte. This way the Mv code of "-3" would not be too confusing on the end of this "...text-3", but would look cleaner as "...text -3". But it makes the packet one byte longer. RECEIVING AND DISPLAY OF MIC-E TEXT (STATUS): Since the leading TYPE byte "T" was not as well defined as it could have been in the original Mic-E spec, this byte will be displayed as part of the text on some existing receiving applications that display the received Mic-E text. It is recommended that all future RECEIPT and DISPLAY software consider that this leading TYPE byte will usually be one of the above TYPE characters " ", ">", "]", "'", or "`" and should not display it with the text. This is essential to maintain the common 10x10x8 text formatting of local information for best display on mobile displays. So, suppress the T-TYPE byte from the text display if it is recognized. But use this information to display the radio type elsewhere as appropriate. Similarly, if the ending "....Mv" bytes are both recognized and matched and decoded and displayed elsewhere, then these two bytes may be suppressed from the display if desired. If these two bytes are not decoded and are not recognized, then they need to be displayed for older radios so the operator can interpret their meaning until his firmware is updated. When a new type is not recognized, then display "McE-Msg" for a two-way system and "McE-Trk" for a tracker without message capability. If 8 bytes are available for this display, then display "MicE-Msg or McTrackr" etc... This table is maintained on the APRS web page: www.aprs.org/aprs12/mic-e-types.txt Adding these two new "'" and "`" OTHER MIC-E TYPE bytes was only possible beacuse extensive testing showed that those were the only ASCII bytes that the tens of thousands of D7 and D700 radios and UIview would decode now. Fortunately, the D710 also parses these TYPE bytes, and is fully compatible with version number V2.01 and later. See examples in www.aprs.org/aprs12/mic-e-examples.txt Bob Bruninga WB4APR@amsat.org pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy