Signal lamp

This is an old revision of this page, as edited by Alexbot (talk | contribs) at 12:21, 14 June 2009 (robot Adding: pl:Aldis). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Signal lamp, also called Aldis lamp, is a visual signaling device for optical communication (typically using Morse code) – essentially a focused lamp which can produce a pulse of light. It is named after its inventor Authur C W Aldis. This pulse is achieved by opening and closing shutters mounted in front of the lamp, either via a manually-operated pressure switch or, in later versions, automatically. The lamps were usually equipped with some form of optical sight, and were most commonly used on naval vessels and in airport control towers (using color signals for stop or clearance).

Signal lamp training during World War II.

Aldis lamps were pioneered by the British Royal Navy in the late 19th century, and were used until the end of the 20th century on naval vessels. They provided handy, secure communications during periods of radio silence as well as other times and were particularly useful for convoys operating during the Battle of the Atlantic. There were several types. Some signal lamps were mounted on the mastheads of ships, some small hand-held versions were also used ('The Aldis lamp') and other more powerful ones were mounted on pedestals. These larger ones used a carbon arc lamp as their light source with a diameter of 20 inches (50 cm). These could be used to signal to the horizon, even in conditions of bright sunlight. Although it was originally thought that it was only possible to communicate by line-of-sight, in practice it was possible to illuminate cloud bases both during the night and day which allowed for communication beyond the horizon. A maximum transmission speed possible by using flashing lights was no more than 14 wpm.

They had a secondary function as simple spotlights.

The idea of flashing dots and dashes from a lantern was first put in to practice by Captain, later Vice Admiral, Philip Colomb in 1867. His original code, which the Navy used for seven years, was not identical with Morse, but Morse code was eventually adopted with the addition of several special signals. Flashing lights were the second generation of signaling in the Royal Navy, after the flag signals most famously used to spread Nelson's rallying-cry before the Battle of Trafalgar.

The Royal Navy and NATO forces uses signal lamps when radio communications need to be silent or electronic "spoofing" is likely. Also, given the prevalence of night vision equipment in today's armed forces, signaling at night is usually done with lights that operate in the infrared(IR) spectrum making them less likely to be detected. All modern forces have followed suit due to technological advances in digital communications.

Air Traffic Control usage

In air traffic control towers, signal lamps are still used today, as a backup device in case of a complete failure of an aircraft's radio. Light signals can be red, green or white, and steady or flashing. Messages are limited to a handful of basic instructions (eg. "land", "stop" etc); they are not intended to be used for transmitting messages in Morse code. Aircraft can acknowledge signals by rocking their wings or flashing their landing lights. [1]

See also

References

pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy