diff --git a/examples/sht4x_displayio_simpletest.py b/examples/sht4x_displayio_simpletest.py
new file mode 100644
index 0000000..4f3c696
--- /dev/null
+++ b/examples/sht4x_displayio_simpletest.py
@@ -0,0 +1,53 @@
+# SPDX-FileCopyrightText: 2024
+# SPDX-License-Identifier: MIT
+
+import time
+import board
+from adafruit_display_text.bitmap_label import Label
+from displayio import Group
+from terminalio import FONT
+
+import adafruit_sht4x
+
+# Create sensor object, communicating over the board's default I2C bus
+i2c = board.I2C() # uses board.SCL and board.SDA
+# i2c = board.STEMMA_I2C() # For using the built-in STEMMA QT connector
+sht = adafruit_sht4x.SHT4x(i2c)
+
+print("Found SHT4x with serial number", hex(sht.serial_number))
+
+sht.mode = adafruit_sht4x.Mode.NOHEAT_HIGHPRECISION
+# Can also set the mode to enable heater
+# sht.mode = adafruit_sht4x.Mode.LOWHEAT_100MS
+# print("Current mode is: ", adafruit_sht4x.Mode.string[sht.mode])
+
+
+# Example written for boards with built-in displays
+display = board.DISPLAY
+
+# Create a main_group to hold anything we want to show on the display.
+main_group = Group()
+
+# Create a Label to show the readings. If you have a very small
+# display you may need to change to scale=1.
+display_output_label = Label(FONT, text="", scale=2)
+
+# Place the label near the top left corner with anchored positioning
+display_output_label.anchor_point = (0, 0)
+display_output_label.anchored_position = (4, 4)
+
+# Add the label to the main_group
+main_group.append(display_output_label)
+
+# Set the main_group as the root_group of the display
+display.root_group = main_group
+
+# Begin main loop
+while True:
+ temperature, relative_humidity = sht.measurements
+ # Update the label.text property to change the text on the display
+ display_output_label.text = (
+ f"Temperature: {temperature:.1f} C \nHumidity: {relative_humidity:.1f} %"
+ )
+ # Wait for a bit
+ time.sleep(1)
pFad - Phonifier reborn
Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.
Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.
Alternative Proxies:
Alternative Proxy
pFad Proxy
pFad v3 Proxy
pFad v4 Proxy