From 3ddee7c04f7317677ea53ecc3bb5ceeacbe7a7ad Mon Sep 17 00:00:00 2001
From: multicoder9 <205438007+multicoder9@users.noreply.github.com>
Date: Sat, 29 Mar 2025 22:51:52 +0700
Subject: [PATCH 1/2] Add CRC7 values for SDCard.cmd() function calls
Seems to be needed for some SDXC cards (SanDisk Ultra SDXC)
Signed-off-by: multicoder9 <205438007+multicoder9@users.noreply.github.com>
---
micropython/drivers/storage/sdcard/sdcard.py | 36 ++++++++++++++------
1 file changed, 25 insertions(+), 11 deletions(-)
diff --git a/micropython/drivers/storage/sdcard/sdcard.py b/micropython/drivers/storage/sdcard/sdcard.py
index c9c991f59..0500396e1 100644
--- a/micropython/drivers/storage/sdcard/sdcard.py
+++ b/micropython/drivers/storage/sdcard/sdcard.py
@@ -37,6 +37,20 @@
_TOKEN_STOP_TRAN = const(0xFD)
_TOKEN_DATA = const(0xFE)
+## This function computes crc7 for SDcard commands
+## It is not optimized, so do not call it where performance is critical
+## You should usually be precomputing these values and hardcode them
+#def crc7( cmd:bytes ):
+# crc = 0
+# for value in cmd:
+# for i in range(8):
+# crc <<= 1
+# if (value&0x80)^(crc&0x80):
+# crc ^= 0x09
+# value <<= 1
+# return ((crc<<1)|1)&0xFF
+#def cmd_args_to_bytes( cmd:int, args:int ):
+# return bytes( [cmd|0x40,(args>>24)&0xFF,(args>>16)&0xFF,(args>>8)&0xFF,args&0xFF] )
class SDCard:
def __init__(self, spi, cs, baudrate=1320000):
@@ -92,7 +106,7 @@ def init_card(self, baudrate):
# get the number of sectors
# CMD9: response R2 (R1 byte + 16-byte block read)
- if self.cmd(9, 0, 0, 0, False) != 0:
+ if self.cmd(9, 0, 0xAF, 0, False) != 0:
raise OSError("no response from SD card")
csd = bytearray(16)
self.readinto(csd)
@@ -109,7 +123,7 @@ def init_card(self, baudrate):
# print('sectors', self.sectors)
# CMD16: set block length to 512 bytes
- if self.cmd(16, 512, 0) != 0:
+ if self.cmd(16, 512, 0x15) != 0:
raise OSError("can't set 512 block size")
# set to high data rate now that it's initialised
@@ -118,8 +132,8 @@ def init_card(self, baudrate):
def init_card_v1(self):
for i in range(_CMD_TIMEOUT):
time.sleep_ms(50)
- self.cmd(55, 0, 0)
- if self.cmd(41, 0, 0) == 0:
+ self.cmd(55, 0, 0x65)
+ if self.cmd(41, 0, 0xE5) == 0:
# SDSC card, uses byte addressing in read/write/erase commands
self.cdv = 512
# print("[SDCard] v1 card")
@@ -129,10 +143,10 @@ def init_card_v1(self):
def init_card_v2(self):
for i in range(_CMD_TIMEOUT):
time.sleep_ms(50)
- self.cmd(58, 0, 0, 4)
- self.cmd(55, 0, 0)
- if self.cmd(41, 0x40000000, 0) == 0:
- self.cmd(58, 0, 0, -4) # 4-byte response, negative means keep the first byte
+ self.cmd(58, 0, 0xFD, 4)
+ self.cmd(55, 0, 0x65)
+ if self.cmd(41, 0x40000000, 0x77) == 0:
+ self.cmd(58, 0, 0xFD, -4) # 4-byte response, negative means keep the first byte
ocr = self.tokenbuf[0] # get first byte of response, which is OCR
if not ocr & 0x40:
# SDSC card, uses byte addressing in read/write/erase commands
@@ -250,7 +264,7 @@ def readblocks(self, block_num, buf):
assert nblocks and not len(buf) % 512, "Buffer length is invalid"
if nblocks == 1:
# CMD17: set read address for single block
- if self.cmd(17, block_num * self.cdv, 0, release=False) != 0:
+ if self.cmd(17, block_num * self.cdv, 0x7F, release=False) != 0:
# release the card
self.cs(1)
raise OSError(5) # EIO
@@ -258,7 +272,7 @@ def readblocks(self, block_num, buf):
self.readinto(buf)
else:
# CMD18: set read address for multiple blocks
- if self.cmd(18, block_num * self.cdv, 0, release=False) != 0:
+ if self.cmd(18, block_num * self.cdv, 0x7F, release=False) != 0:
# release the card
self.cs(1)
raise OSError(5) # EIO
@@ -269,7 +283,7 @@ def readblocks(self, block_num, buf):
self.readinto(mv[offset : offset + 512])
offset += 512
nblocks -= 1
- if self.cmd(12, 0, 0xFF, skip1=True):
+ if self.cmd(12, 0, 0x61, skip1=True):
raise OSError(5) # EIO
def writeblocks(self, block_num, buf):
From d5f76e666c5b4199bd476617f566ca7fd9dbab49 Mon Sep 17 00:00:00 2001
From: multicoder9 <205438007+multicoder9@users.noreply.github.com>
Date: Mon, 31 Mar 2025 15:22:35 +0700
Subject: [PATCH 2/2] micropython/drivers/storage/sdcard/sdcard.py: Added 0x7F
CRC for two more writeblocks cmd calls
Signed-off-by: multicoder9 <205438007+multicoder9@users.noreply.github.com>
---
micropython/drivers/storage/sdcard/sdcard.py | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/micropython/drivers/storage/sdcard/sdcard.py b/micropython/drivers/storage/sdcard/sdcard.py
index 0500396e1..1c1370c60 100644
--- a/micropython/drivers/storage/sdcard/sdcard.py
+++ b/micropython/drivers/storage/sdcard/sdcard.py
@@ -295,14 +295,14 @@ def writeblocks(self, block_num, buf):
assert nblocks and not err, "Buffer length is invalid"
if nblocks == 1:
# CMD24: set write address for single block
- if self.cmd(24, block_num * self.cdv, 0) != 0:
+ if self.cmd(24, block_num * self.cdv, 0x7F) != 0:
raise OSError(5) # EIO
# send the data
self.write(_TOKEN_DATA, buf)
else:
# CMD25: set write address for first block
- if self.cmd(25, block_num * self.cdv, 0) != 0:
+ if self.cmd(25, block_num * self.cdv, 0x7F) != 0:
raise OSError(5) # EIO
# send the data
offset = 0
pFad - Phonifier reborn
Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.
Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.
Alternative Proxies:
Alternative Proxy
pFad Proxy
pFad v3 Proxy
pFad v4 Proxy