Open
Description
I've been using scip with my RPi3 and 'RPi serial output to USB cable'. I've also been using Python's miniterm for comparison. With the command:
sudo python3 -m serial.tools.miniterm /dev/ttyUSB0 921600
I get
--- Miniterm on /dev/ttyUSB0 921600,8,N,1 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
[0] mingo version 0.5.0
[1] Booting on: Raspberry Pi 3
[2] Drivers loaded:
1. BCM PL011 UART
2. BCM GPIO
[3] Chars written: 117
[4] Echoing input now
When I use scip with:
scip /dev/ttyUSB0 921600
I get:
Welcome to scip.
To exit type <Enter> + ~ + .
or unplug the serial port.
[0] mingo version 0.5.0
[1] Booting on: Raspberry Pi 3
[2] Drivers loaded:
1. BCM PL011 UART
2. BCM GPIO
[3] Chars written: 117
[4] Echoing input now
Here, it was stated that mingo is only sending \n where it should be sending \r\n.
Metadata
Metadata
Assignees
Labels
No labels