========================================================================== HRRR-primary: account: rtrr xml: /misc/whome/rtrr/HRRR/xml bin: /misc/whome/rtrr/HRRR/bin WPS exec: /whome/rtrr/HRRR/exec/WPS WRF exec: /whome/rtrr/HRRR/exec/WRF UPP exec: /whome/rtrr/HRRR/exec/UPP MODEL: WRF-ARWv3.9+ crontab used in the cycles: MAILTO="" * * * * * /misc/whome/rtrr/HRRR/xml/run_hrrr_primary.ksh run_hrrr_primary.ksh #!/bin/ksh --login module load intel module load rocoto /apps/rocoto/default/bin/rocotorun -w /home/rtrr/HRRR/xml/HRRR_primary.xml -d /home/rtrr/HRRR/xml/HRRR_primary.db exit 0 ========================================================================= 2020-05-28: Eric James (22 UTC) HRRR-primary: Updated ncep_post.exe to output gridded exceedance fields comparing QPF to FFG thresholds. Included are: 1) 1h QPF exceeding 1h FFG for all forecast hours: :FFLDRO:surface:0-1 hour acc fcst: 2) 3h QPF exceeding 3h FFG for the 3h forecast: :FFLDRO:surface:0-3 hour acc fcst: 3) 6h QPF exceeding 6h FFG for the 6h forecast: :FFLDRO:surface:0-6 hour acc fcst: 4) 12h QPF exceeding 12h FFG for the 12h forecast: :FFLDRO:surface:0-12 hour acc fcst: ========================================================================= 2019-12-03: Eric James (17 UTC) HRRR-primary: Updated wrf.exe and real.exe to the top of the trunk. Two changes: 1) Maximum smoke concentration implemented (should only affect very small regions around the most intense fires; Ravan Ahmadov). 2) Bug fix for RRTMG shortwave, which should lead to a very small reduction in low-level daytime cold bias (Joe Olson) wrf.exe_21nov19_41992d4d and real.exe_21nov19_41992d4d ========================================================================= 2019-11-13: Tanya Smirnova (16 UTC) HRRR-primary: 1. Introduced a separated freezing point temperature for salty lakes: the Great Salt Lake, UT and Mono Lake, CA. The ice that has been built on these lakes already, was removed. wrf.exe.13nov19_f7485f48 and real.exe.13nov19_f7485f48 ========================================================================= 2019-09-24: David Dowell (21 UTC) HRRRDAS: "Rolling" ensemble design turned on. 18 of the ensemble members (odd-numbered members) are initialized at 0900 UTC, and the other 18 (even-numbered members) are initialized at 2100 UTC. Each member is cycled for 24 hours before being replaced. (Previously, all 36 members were initialized at 0900 UTC.) ========================================================================= 2019-09-24: David Dowell (09 UTC) HRRRDAS: Source of IC perturbations changed from GDASv14 to GDASv15. ========================================================================= 2019-09-20: Tanya Smirnova (19 UTC) HRRR-primary: Updated wrf.exe. The new executable uses Xu-Randall formulation to compute cloud fraction only when CLDFRA_BL is < 0.001. This is a better solution for cycled models. ========================================================================= 2019-09-20: David Dowell (18 UTC) HRRR-primary: CLDFRA_BL, QC_BL and QKE are added to HRRRX initialization from HRRRDAS. ========================================================================= 2019-09-18: Tanya Smirnova (23 UTC) HRRR-primary: Updated wrf.exe. The new executable includes bug fixes for the HRRR initialization in the pre-forecast. ========================================================================= 2019-09-17: Tanya Smirnova and Ming Hu (23 UTC) HRRR-primary: Updated surface cycling. The new executable adds QVG, QCG, QFX, HFX, UST and PBLH to cycled variables. This will help with cold-start initialization in the HRRR pre-forecast. ========================================================================= 2019-09-06: David Dowell (17 UTC) HRRRDAS: Turned off hourly, non-variational cloud building in ensemble members. Although it was producing a desirable increase in low-level water vapor, it was also causing spurious convection at short lead times. ========================================================================= 2019-08-27: Ming Hu (21 UTC) HRRR-primary: change GSI executable from: gsi.x_ProdGSI_soiltune_20190809_8e95ae2ff_Intel18_impi2018 to : gsi.x_ProdGSI_gsddev_20190827_2a6fb97_Intel18_impi2018 This is to use the original soil moisture/temperature adjustment before we increased the adjustment range to moisture and temperature. New executable works since cycle: 2019082721 ========================================================================= 2019-08-23: David Dowell (09 UTC) HRRRDAS: Atmospheric initial conditions (ensemble mean) now come from RAPX at 0900 UTC. Previously, HRRRDAS was initialized from GFS at 0300 UTC. ========================================================================= 2019-08-20: David Dowell (21 UTC) HRRRDAS: Turned on hourly, non-variational cloud building in ensemble members. The method is like that in HRRRX. ========================================================================= 2019-08-21: Eric James (17 UTC) HRRR-primary: Script change to eliminate the use of "ncks" tool that is apparently too inefficient to be used on WCOSS. Emissions info is now always copied in using Sam Trahan's "fires_ncfmake" tool (for both pre-forecast and full forecast), and smoke is cycled at the beginning of the 1h pre-forecast using Sam Trahan's "cycle_netcdf" tool. ========================================================================= 2019-08-14: David Dowell (23 UTC) HRRR-primary: Script change that affects initialization of QNIFA and QNWFA. These fields had been copied from HRRRDAS, when available, but now QNIFA and QNWFA will always be initialized from the RAP-primary through WPS. ========================================================================= 2019-08-14: David Dowell (04 UTC) HRRRDAS: Discontinued EnKF assimilation of METAR-based qv pseudo obs, which had been used for cloud building. ========================================================================= 2019-08-09: Tanya Smirnova (21 UTC) HRRR-primary: Update in soil temperature adjustment in GSI. This version will allow soil warming up to 1.5 K instead of 1.0 K in the previous version. ========================================================================= 2019-07-31: Tanya Smirnova (20 UTC) HRRR-primary: Bug fix for lake ice, that prevented ice from melting. ========================================================================= 2019-07-30: Tanya Smirnova (16 UTC) HRRR-primary: Tuned down albedo dependence on Solar Zenith Angle (SZA) for short vegetation. The parameter d=0.4 is changed to d=0.25. This modification will slightly reduce modrning/evening albedo to more reasonable values. ========================================================================= 2019-07-26: Ming Hu (23 UTC) HRRR-primary: Pulled back some changes for more aggressive soil moistening in GSI. The previous version was turning dry bias into moist causing too cold daytime temperatures. ========================================================================= 2019-07-19: Eric James (21 UTC) HRRR-primary: Emergency bug fix to FVCOM update to correct the check for missing value flag in FVCOM output. Missing values were being copied in for SST and TSK over Lake Superior. This is corrected starting with 21 UTC run. ========================================================================= 2019-07-16: David Dowell (21 UTC) HRRRDAS: Bug fix. HRRRX was previously receiving the mean of 36 member 1-h forecasts for initial conditions. Now HRRRX is correctly receiving the mean of the 36 member analyses. ========================================================================= 2019-07-09: Ming Hu (23 UTC) HRRR-primary: Modification to soil moisture update in GSI to more aggressive moistening to compensate for growing dry bias in 2-m dewpoint ========================================================================= 2019-06-19: Eric James (17 UTC) HRRR-primary: wrf.exe and real.exe and updated to revision cd7a535a. This update installs smoke-related code changes to fix a few minor bugs and make the code consistent with the recent changes made in the 6th order diffusion and interpolation of the RAP fields to the HRRR vertical grid (linear vs. lagrangian). The unused code was deleted in the plumerise module. Minor impact on meteorology via the smoke impact on radiation. ========================================================================= 2019-06-05: David Dowell (04 UTC) HRRRDAS: Bug fix. The change in GSI executable on May 10 led to erroneous radar-reflectivity DA in HRRRDAS. Today's change allows the reflectivity DA to work properly. ========================================================================= 2019-06-01: David Dowell HRRRDAS: LSM perturbations turned back on. Magnitudes are 25% of what had been used before May 23. ========================================================================= 2019-05-23: David Dowell HRRRDAS: LSM perturbations turned off after discovery that magnitudes were too large. ========================================================================= 2019-05-23: David Dowell HRRRDAS: Assimilation of METAR-based qv pseudo obs, for cloud building, turned on. ========================================================================= 2019-05-23: Eric James (22 UTC) HRRR-primary: Direct feedback effect for smoke turned on, with namelist change from: simple_dir_fdb = 0, to: simple_dir_fdb = 1, starting with free forecast at 22 UTC. ========================================================================= 2019-05-21: Jaymes Kenyon (20 UTC) HRRR-primary: wrf.exe and real.exe are updated to revision be9517d0. This update installs: 1) updates to the MYNN, intended to increase diffusion in the convective PBL 2) updates to the radiation driver, which remove the Xu–Randall cloud-fraction contribution 3) bug fixes for initialize_real (from G. Thompson), which correct the initialization of hydrometeor number concentrations and fix vertical-interpolation issues 4) bug fixes for the HAILCAST diagnostic (for HRRR applications) ========================================================================= 2019-05-21: Eric James (18 UTC) HRRR-primary: Bug fix for 1h pre-forecast radar processing: since the SLURM transition, only the first of the four sub-hourly radar tten arrays was being correctly calculated; the other arrays were set to zero (convective suppression). This is corrected with 18Z run. ========================================================================= 2019-05-21: Tanya Smirnova (16 UTC) HRRR-primary: SOILPARM.TBL is updated. This table produces good results with the new soil classification. ========================================================================= 2019-05-14: Jaymes Kenyon (19 UTC) HRRR-primary: wrf.exe is updated to revision 88fd813d. This update installs numerous bug fixes, modifications to the lake model initialization, and compiling optimizations. No change to real.exe. ========================================================================= 2019-05-10: Eric James (17 UTC) HRRR-primary: Bug fix in UPP to correct upward shortwave radiation at the surface. Field was always zero due to use of the wrong name for albedo variable used in the calculation. ========================================================================= 2019-05-10: David Dowell (04 UTC) HRRRDAS: gsi.x updated to latest version. (See June 5 log entry regarding the error in reflectivity DA that was introduced by this change.) ========================================================================= 2019-05-07: Jaymes Kenyon (13 UTC) HRRR-primary: wrf.exe and real.exe are updated to revision 4d7ff6c. This update installs Thompson MP from RAPv4/HRRRv3 into HRRRX. Static lookup tables for the revised MP sheme are also installed. ========================================================================= 2019-04-26: Jaymes Kenyon (15 UTC) HRRR-primary: wrf.exe and real.exe are updated to revision a5d47e49. Accompanying this update, the following WRF namelist settings are made: added: diff_6th_factor2 = 0.04 changed: moist_mix6_off = .false. (was .true.) scalar_mix6_off = .false. (was .true.) ========================================================================= 2019-04-25: Ming Hu HRRR-primary: da_update_bc.exe is updated to da_update_bc.exe_20190425_056e213_intel18 This update is to fix a bug in update_bc that accidentally change snow fields in wrfinput_d01. Please see GSD_UTL revision 056e21375d4bdc6b4548e180c8431a00cc347722 for more details. This version works since cycle 2019042518. ========================================================================= 2019-04-19: Eric James (19 UTC) HRRR-primary: Bug fix for FVCOM update. All land surface variables are now forced to be consistent with the new fractional sea ice field brought in from FVCOM. This is revision 664ca5ae ========================================================================= 2019-04-19: Jaymes Kenyon (17 UTC) HRRR-primary: wrf.exe and real.exe are updated to revsion a202b11d. No science-related mods are introduced, but significant improvements in memory usage and disk footprint are expected. ========================================================================= 2019-04-18: Jaymes Kenyon (19 UTC) HRRR-primary: updates to WRF namelist settings: (1) Wicker's adaptive implicit vertical-advection scheme is active via "zadvect_implicit = 1" (2) w-damping is removed via "w_damping = 0" (change to free forecast only) (3) the microphysics temperature-tendency limit ("mp_tend_lim") is removed (change to free forecast only) ========================================================================= 2019-04-15: Eric James (21 UTC) HRRR-primary: Backing out the previous change; got a crash in the LSM ========================================================================= 2019-04-15: Eric James (20 UTC) HRRR-primary: Bug fix for FVCOM update. ISLTYP, VGTYP, and LANDMASK were not getting updated to be consistent with fractional ice cover. Pending more discussion with Tanya, for now these variables will be set to ice value for gridpoints with FVCOM ice coverage greater than 10%, and water value elsewhere. ========================================================================= 2019-04-12: Eric James (20 UTC) HRRR-primary: Bug fix in FVCOM update: Implemented a check to make sure we don't copy in missing values (-99C) from FVCOM for SST/TSK. Sometimes not all of the Great Lakes have data in GLERL's FVCOM, and we want to only use the data if it's not missing! ========================================================================= 2019-04-12: Eric James (17 UTC) HRRR-primary: Enabled 15-min precip output in sub-hourly GRIB2 files. Currently includes total precip, snow (liquid equivalent), and graupel. ========================================================================= 2019-04-12: Trevor Alcott / Joe Olson (15 UTC) HRRR-primary: Turned on non-local transport of momentum in mass-flux scheme bl_mynn_edmf_mom = 1 ========================================================================= 2019-04-05: Eric James (21 UTC) HRRR-primary: Updated WRF executable to revision 460ae41b, which includes TKE cycling when cycling = true, as well as new subhourly precipitation bucket capability. Also this is the first compilation on the new OS, resulting in minor speedup. ========================================================================= 2019-03-12: Eric James (18 UTC) HRRR-primary: UPP is updated to output smoke on the lowest model level as 8m above ground level smoke, in 2D GRIB2 files. ========================================================================= 2019-03-11: Ming Hu HRRR-primary: process_NESDIS_imssnow.exe is updated to process_NESDIS_imssnow.exe_20190311_95b5446 This update is to fix a bug in snow/ice trim/building. Please see GSD_UTL revision 95b5446e11ec3e1e633 for more details. ========================================================================= 2019-03-07: Tanya Smirnova HRRR-primary: Starting with cycle 2019030719 the WRF code has: 1. Fix for lake ice/snow - 971158fb. 2. Updated surface MYNN from Joe Olson - d5b15332. 3. Smoke change from Ravan - 8968e34c. It adds smoke extinction to the surface visibility diagnostics. ========================================================================= 2019-02-27: Ming Hu HRRR-primary: Since cycle 2019022722, GSI-hyb analysis uses pre-porcessed ensemble perturbations instead of reading GDAS ensembles directly. ========================================================================= 2019-02-26: Eric James (19 UTC) HRRR-primary: Turned on copying in of fractional sea ice from NOAA GLERL's FVCOM model with every run. FVCOM runs twice a day, and has output at 3h intervals, so we are grabbing the most recent run's forecast valid at the time closest to the HRRRX init time. This is expected to have a minor impact, most noticeable on fluxes and low-level temperatures over the Great Lakes. ========================================================================= 2019-02-21: Ming Hu HRRR-primary: process_NESDIS_imssnow.exe is updated to process_NESDIS_imssnow.exe_20190221_e19cbf3 This update is to fix a bug in snow/ice trim/building. Please see GSD_UTL revision e19cbf3048e347 for more details. ========================================================================= 2019-02-20: Eric James (19 UTC) HRRR-primary: Switched to new geo file with 15" land use data for HRRRX, which includes a large number of new lakes in Canada for the CLM lake model, as well as new soil classification. ========================================================================= 2019-02-18: Ming Hu HRRR-primary: UPP is updated to unipost.exe_20190217_bc55f77. This update needs several changes: 1. link CRTM 2.2.6 coefficients with additions files 2. use new hrrrx_postxconfig-NT.txt_20190214_fc4ffe2 3. use new modules to run ========================================================================= 2019-02-17: Tanya Smirnova HRRR-primary: (1) Top of the trunk WRFV3.9 code with modifications and bug fixes in most of physics. ========================================================================= 2019-01-25: Tanya Smirnova (23 UTC) HRRR-primary: WRFV3.9_rapv5_hrrr_v4_branch is used. Several modification to this branch: (1) Several more changes for WRF-Smoke from Ravan. That brings the WRF-Smoke code to the top of master. (2) Top of the trunk MYNN PBL and MYNN surface needed for latest WRF-Smoke modifications. ========================================================================= 2019-01-11: Tanya Smirnova (18 UTC) HRRR-primary: Fix for correct cycling of lake ice. With this fix snow on lake ice starts to accumulate. ========================================================================= 2018-11-16: Eric James (20 UTC) HRRR-primary: Introduced smoke into HRRRX, including (1) Updated WRF with WRF-chem executable (version 3.9) (2) No feedback to meteorology currently allowed (either the dir effect or the indirect effect) (3) Visibility is NOT affected by smoke for now (4) Pre-forecast hour and free forecast both have smoke ========================================================================== 2018-09-13: Curtis Alexander (20 UTC) HRRR-primary: Changes to 6th order diffusion settings: New: diff_6th_opt = 2, diff_6th_factor = 0.12, diff_6th_slopeopt = 1, diff_6th_thresh = 0.05, moist_mix6_off = .true., chem_mix6_off = .true., tracer_mix6_off = .true., scalar_mix6_off = .true., tke_mix6_off = .true., Old: diff_6th_opt = 2, diff_6th_factor = 0.25, diff_6th_slopeopt = 1, diff_6th_thresh = 0.10, ========================================================================== 2018-09-13: Curtis Alexander (03 UTC) HRRR-primary: Updated to WRFv3.9.1 revision a123a2b7 from af21a02e Restored severe weather diagnostics including: 1) Maximum/minimum updraft helicities and vertical vorticities 2) Maximum hail diameter at surface and aloft 3) Maximum 10m U and V wind speed components 4) Maximum 1km and -10C reflectivities 5) Maximum lightning threats 1, 2 and 3 ========================================================================= 2018-08-29: Eric James (17 UTC) Updated WRF (real.exe and wrf.exe) to revision af21a02e which includes: (1) CLM lake model deployment for shallow lakes. WRF pre-forecast hour namelist now includes: In physics: sf_lake_physics = 1, 1, 1 In time_control: cycling = .true., In domains: rebalance = 1 Free forecast namelist has: In domains: rebalance = 0 (2) Updates for sub-grid clouds (from revision b321aeb8), including: (a) removing the limit on subgrid qcloud for nonconvective clouds (b) reducing the cloud-fraction scaling factor for low-level nonconvective clouds (c) modifications to the diagnostic-decay calculation (d) reductions to the assumed cloud-drop effective radii of subgrid clouds... ========================================================================= 2018-08-28: Ming Hu (15 UTC) Update GSI executable to use GSD_GSI version 63a196f ( switch HRRR_gsi_hyb from gsi.exe_01May2018_bfd854a1 to gsi.x_27AUG2018_63a196f_intel15_impi5). This GSI executbale is used since cycle 2018082814. To use this version, the gsi_hyb.ksh, gsiparm.anl.sh, and global_satinfo.txt were modified. details are the same as RAP ones ( see RAPX change log: 2018-08-27: Ming Hu (19 UTC)) The old gsi_hyb.ksh, global_satinfo.txt, and gsiparm.anl.sh for HRRRv3 were saved as: gsi_hyb.ksh_28AUG2018_HRRRv3 global_satinfo.txt_28AUG2018_HRRRv3 gsiparm.anl.sh_28AUG2018_HRRRv3 Those updates automatically apply to HRRR_AK and HRRR_HI except: gsi_hyb.ksh in HRRR_AK needs update (done). ========================================================================= 2018-08-27: Ming Hu (16 UTC) Turn on TCvitals in GSI analysis since cycle 2018082718 ======================================================================= 2018-08-22: Tanya.Smirnova (21 UTC) Turned on albedo dependence on solar angle: alb_sol=1 ======================================================================= 2018-06-25: (16 UTC) Updated WRF (real.exe and wrf.exe) to version 3.9 code base and included physics changes Updated MYNN/EDMF Updated Thompson More complete gravity wave drag (blocking, form, large-scale) Solar-zenith angle for albedo Fix from Jimy to limit Q2 not to exceed the lowest level QVAPOR by more than 5% Changes in sfc MYNN for 2-m diagnostics with free convection regime. In stable conditions limit PSIM and PSIH after PSIM2 and PSIH2 are computed. Updated process snow/ice (1) Fractional sea-ice set to 1 (2) Bug fix for consistency check of land mask, veg/soil types, etc... when ice from GFS is melted to ensure land mask turned to water. (3) Water check included in consistency ======================================================================= 2018-05-17: (06 UTC) Updated geo file New 15" MODIS land use/soil classification data MODIS albedo information New sub-grid terrain variability for gravity wave drag ======================================================================== 2018-05-02: (15 UTC) Updated GSI again to further change soil temperature adjustment over snowpack to allow it to melt and avoid large 2mT analysis increments. ========================================================================= 2018-04-19: (00 UTC) Updated GSI to change soil temperature adjustment over snowpack to use 281K threshold for snow > 32 mm to avoid large 2mT analysis increments where snowmelt is occurring. ========================================================================= 2018-03-23: (19 UTC) Updated GSI to assimilate moisture obs from obs types 120 (raobs), 131, 133, and 134 (AMDAR and TAMDAR) between 300 and 10 hPa. ========================================================================= 2018-03-19: (00 UTC) Introduced change to variable-density snow algorithm with: New SLR: 8-1 to 17-1 Old SLR: 4-1 to 13-1 RUC LSM snow mosaic turned off for 2mT < 271K ========================================================================= 2018-03-13: (00 UTC) HRRRP-AK Introduced fractional sea ice. ========================================================================= 2018-03-09: (19 UTC) HRRRP-primary: Introduced fractional sea ice. ========================================================================= 2017-12-12: (00 UTC) HRRRP-primary: Restored use of GPS-PW obs type 153 in nam_regional_convinfo_RAP.txt ========================================================================= 2017-10-22: (15 UTC) HRRR-primary: Updated UPP to EMC trunk sync and includes bug fix for theta-v based PBL height estimate in wind gust diagnostic to increase wind gust speeds especially at night in terrain-induced waves. ========================================================================= 2017-06-12: HRRR-primary: Updated to use only RTG SST analysis, discontinuing NAM SST analysis use to improve in-land lake temperatures. ========================================================================= 2017-05-26: (21 UTC) HRRR-primary: Updated to top-of-our-trunk UPP and changed 10m U and V from lowest model level to new WRF-ARW MYNN diagnostic ========================================================================= 2017-05-26: (19 UTC) HRRR-primary: Updated to top-of-trunk GSI (another EMC sync) with minimial change New: i_coastline=3 i_gsdqc=2 l_closeobs=.true. ========================================================================= 2017-05-25: (05 UTC) HRRR-primary: Added MYNN changes for Gravity Wave Drag Option Added MYNN change for diagnosing 10m U and V to use neutral-log profile Enabled gravity wave drag New: gwd_opt = 3 Old: gwd_opt = 0 Changed numerical diffusion option to align along x,y,z coordinates New: diff_opt = 2 Old: diff_opt = 1 ========================================================================= 2017-05-08: (06 UTC) HRRR-primary: Added MYNN optimizations for code-speed up (few percent) Added MYNN Buoyancy Enhancement Factor (BEF) and more sub-grid cloud retention Mostly increased roughness lengths for various land use categories Evergreen Needleleaf Forest 0.7 --> 0.8 Deciduous Needleleaf Forest 0.7 --> 0.8 Mixed Forests 0.7 --> 0.8 Woody Savannas 0.15 -> 0.3 cropland/natural vegetation mosaic 0.2 --> 0.3 Mixed Tundra 0.1 --> 0.075 ========================================================================= 2017-04-07: (06 UTC) HRRR-primary: Updated to top-of-trunk GSI including new costal surface observation operator for temperature and moisture New: i_costline = 3 ========================================================================= 2017-03-29: (19 UTC) HRRR-primary: Restored new MYNN mixing-length and EDMF changes and bug fixes for cloud retention New: bl_mynn_cloudpdf = 2 bl_mynn_edmf = 1 bl_mynn_mixlength = 2 ishallow = 0 Old: bl_mynn_cloudpdf = 0 bl_mynn_edmf = 0 bl_mynn_mixlength = 1 ishallow = 1 ========================================================================= 2017-03-20: (19 UTC) HRRR-primary: Addded level 2 radial velocity data to GSI ========================================================================= 2017-03-16: (19 UTC) HRRR-primary: Added level 2.5 radial velocity data to GSI ========================================================================= 2017-03-15: (15 UTC) HRRR-primary: Changed to aerosol option to Thompson-RRTMG aersol-radiation interaction New: aer_opt = 3, Old: aer_opt = 2, ========================================================================= 2017-03-15: (03 UTC) HRRR-primary Restored bug-fixed hybrid vertical coordinate in GSI/WRF/update_bc New: hybrid_opt = 2 etac = 0.2 wrf_mass_hybridcord =.true. Old: hybrid_opt = 0 wrf_mass_hybridcord =.false. Updates to MYNN scheme to improve retention of clouds through reduced buoyancy generation of TKE ========================================================================= 2017-02-24: Curtis Alexander (12 UTC) HRRR-primary Updated UPP to change visibility diagnostic to include: Removed aerosol component Base value for RH-alone visibility is changed from 80km to 90km ========================================================================= 2017-02-16: Curtis Alexander (19 UTC) HRRR-primary Updated UPP to change visibility diagnostic to include: Reduced RH contribution via increase background from 60km to 80km Added Dave Turner's code for aerosol component using water-friendly aerosols ========================================================================== 2017-02-11: Curtis Alexander (17 UTC) HRRR-primary Updated GSI to: No more mixed phase building. Just discretely build cloud water or ice but not both at the same 3-d volume Change the hydrometeor building as following: * For water, from 0.5 to 0.25 g/kg * For ice, from 0.5 to 0.1 g/kg. When building cloud water/ice mixing ratios also empirically specify large cloud water/ice number concentrations (smaller hm sizes) to help with retention of clouds during forecast. Increase ice number concentrate to 100 times larger than values added by Terra. New: l_numconc = .true. ========================================================================== 2017-02-08: Curtis Alexander (00 UTC) HRRR-primary Reverted MYNN behavior to older configuration pre-Dec17 with no EDMF General desire for reduced vertical mixing and more retention of clouds/shallow cold air New: bl_mynn_cloudpdf = 0 bl_mynn_edmf = 0 bl_mynn_mixlength = 1 Old: bl_mynn_cloudpdf = 2 bl_mynn_edmf = 1 bl_mynn_mixlength = 2 ========================================================================== 2017-02-02: Curtis Alexander (15 UTC) HRRR-primary Updated WRFv3.8.1 to include Bug fix for more shallow cumulus retention through reduction in mass fluxes Small ruduction in mixing length scales near surface resulting in cooler 2mT at night Speed up 5-6% in MYNN rountines bypassing unused EDMF code, no change in forecasts ========================================================================= 2017-01-20: Curtis Alexander (14 UTC) HRRR-primary Added TAMDAR data processing to conventional data script and GSI Added TAMDAR data executable ========================================================================= 2017-01-19: Curtis Alexander (12 UTC) HRRR-primary Reduced verbose rsl logging in WRF namelists for speed ========================================================================== 2017-01-18: Curtis Alexander (03 UTC) HRRR-primary Removed hybrid vertical coordinate from GSI, WRF and update_bc to address numerical stability at upper-level in stratospheric jet ========================================================================== 2017-01-17: Curtis Alexander (11 UTC) HRRR-primary Added freezing rain accumulation to post-processor Added precision to pressure (6.0) and specific humidity (4.0) ========================================================================== 2017-01-17: Curtis Alexander (14 UTC) HRRR-primary Bug fix for freezing rain bucket accumulation to zero out value above freezing ========================================================================== 2017-01-17: Curtis Alexander (11 UTC) HRRR-primary Applied optimizations for runtime improvement: (1) Hardwired vertical coordinate in Thompson microphysics from John Michalakes (2) Increased compiler flag optimizations that preserves precision in microphysics from Mike Page (3) Set default NetCDF writes to no-zero-fill option from Jim Abeles (4) Enabled more than 100 history files to be output (5) Enabled creation of fcstdone files for a variety of output options/formats (6) Fixed makefiles for building update_bc and mosaic programs ========================================================================== 2017-01-05: Curtis Alexander (02 UTC) HRRR-primary Corrected 10:1 snow accumuation to avoid double-counting introduced on 17 Dec 2016 Optimized MYNN code MYNN added shear-dependent limit on maximum width of updrafts MYNN increased entrainment well above the PBLH to put the breaks on some very tall plumes ========================================================================== 2016-12-30: Curtis Alexander (00 UTC) HRRR and RAP Cloud clearing from GOES now allowed at night down to surface ========================================================================== 2016-12-17: Curtis Alexander (00 UTC) HRRR-primary (changes made to RAP on 12/12/2016) Model - to WRF-ARW v3.8+ Introduction of hybrid vertical coordinate Thompson MP v3.8 - improved upper-level clouds MYNN PBL v3.8+ RUC-LSM v3.8+, includes 15" MODIS - 2m temp changed to new heat-flux diagnostic to avoid discontinuities Data assimilation GSI usable also with hybrid vertical coordinate ========================================================================== 2016-12-01: Curtis Alexander (16 UTC) HRRR-primary: Reduced urban land-use roughness length z0 from 1.0 to 0.5m. ========================================================================== 2016-Oct-Nov: Curtis Alexander and Ming Hu RAP / HRRR data assimilation updates Merge with GSI trunk Add AMVs over land and TAMDAR Reduced vertical density of PBL pseudo-obs for moisture Increase ensemble/fixed weight in hybrid DA to 0.9/0.1 METAR cloud building now limited only <1200m AGL, same as satellite (HRRR only) GOES cloud-top cooling introduced as proxy refl 2016-Oct-Nov: Curtis Alexander and Ming Hu HRRR data assimilation updates GOES cloud-top cooling introduced as proxy refl ========================================================================== 2016-10-19: Updated GSI again to restore use of NASA Langley cloud top data that was lost on 2016-10-11 ========================================================================== 2016-10-13: Curtis Alexander (18 UTC) Updated UPP to compute internal PBL depth for wind gust calculation using theta-v only PBL depth output remains unchanged from model hybrid TKE-Thetav approach ========================================================================== 2016-10-11: Curtis Alexander (21 UTC) Updated GSI for AMV use over land - Changed AMV (245) to lower gross and ob errors Gross error down to 2.0 from 2.5 Ob error down to 4.0 m/s from 7.0 m/s ========================================================================== 2016-09-29: Curtis Alexander (21 UTC) HRRR-primary (and RAP-primary): Updated GSI data assimilation with these changes - Updated to Jan 2016 trunk - changed from 0.75 to 0.85 ensemble weight in hybrid DA - changed METAR cloud build limit from ~4km AGL to 1.2km AGL to be consistent with GOES cloud building - reduced strength of PBL-pseudo-observation - fewer - added cloud drift winds (AMVs) over land ========================================================================== 2016-09-14: Curtis Alexander (21 UTC) RAP-primary: Changed the RAP terrain specification to use grid-cell avg instead of 4-pt bi-linear interpolation (affecting HRRR-primary) ========================================================================== 2015-12-15 Curtis Alexander HRRR-primary - update UPP, GSI - Removed all reflectivity calibration ========================================================================== 2015-10-22 Ming Hu (21 UTC) HRRR-primary: Increased the observation error for the mesonet moisture from 7% to 9% and tightened the gross check threshold from 7 to 4. ========================================================================== 2015-10-21 Ming Hu HRRR-primary: Reduced mesonet uselist threshold for Td bias to 1.2 K ========================================================================== 2015-11-04: Tanya Smirnova (18 UTC) HRRR-primary: UPP upgraded to version with bug fix for precipitation type BUG: set rain category to 1. when 2-m T > 276.15 FIX: snow category (=1.) should be switched to rain when 2-m T > 276.15 NOTE: This upgrade inadvertently removed direct normal/diffuse radiation ========================================================================== 2015-09-02: Curtis Alexander (13 UTC) HRRR-primary: UPP upgraded to revision 1219 to include (1) Direct normal and diffuse radiation output. (2) Clean-up the code for precipitaion type and added check to turn snow into rain if 2-m T > 276 K. ========================================================================== 2015-04-10: Curtis Alexander HRRR ESRL version (HRRRX) update to 2015 version of HRRR as described in RAPHRRR_WCOSS_2016Q1_Final-sb-12oct2015.pdf ========================================================================== 2015-01-01: Curtis Alexander RAP-primary ESRL version updated to 2015 RAPv3. HRRR still running late 2014 version but with updated RAP initial conditions. More information on 2015 RAPv3 included here: RAPHRRR_WCOSS_2016Q1_Final-sb-12oct2015.pdf ========================================================================== 2014-07-12: Curtis Alexander (04 UTC) Updated process IMS snow to revision 945 and set to execute hourly to build/trim snow cover on 3-km grid based on 22z IMS analysis. ========================================================================== 2014-04-10: Curtis Alexander (03 UTC) Updated WRF to v3.5.1 revision 881 Switch to RRTMG shortwave and longwave radiation Added 6th order diffusion of 0.25 in flat terrain regions Switch to hypsometric option #2 for log-p pressure interpolation RUCLSM changes to address cold bias over snowpack Increased thickness of top snow layer Reduced values of exchange coefficient for stable stratification when 2-m T and Q are diagnosed to the values from the 1st atm. level. MYNN updates Coupling with GF shallow and deep cumulus scheme (not used in HRRR) Decrease of roughness length over snow Enabled swint option to interpolate shortwave radiation based on the updated solar zenith angle between radiation calls Enabled option to use blended coarse grid topography at lateral boundaries Enabled option to use seasonal LAI fraction Added potential for additional output diagnostics of time-averaged wind/radiation (not enabled) Add DNI and DDI (shortwave radiation normal and diffuse, respectively) to output Changed roughness length in VEGPARM.TBL to 1.0 in urban areas and 0.20 in cropland areas wrf.nl New: nwp_diagnostics = 1 output_diagnostics = 1 wind_int = 5 hypsometric_opt = 2 smooth_cg_topo = .true. ra_lw_physics = 4 ra_sw_physics = 4 swint_opt = 1 rdlai2d = .true. diff_6th_opt = 2 diff_6th_factor = 0.25 diff_6th_slopeopt = 1 diff_6th_thresh = 0.10 Old: ra_lw_physics = 1 ra_sw_physics = 2 diff_6th_opt = 0 Updated WPS to v3.5.1 revision 797 Added geo topo file to use seasonal LAI fraction Added coarse grid topography information in Vtable.RAP ========================================================================== 2014-04-08: Curtis Alexander (08 UTC) Updated GSI to revision 845 Top-of-trunk for GSI Enabled hybrid DA to use 80-member GFS ensemble with 75% weight and 25% static 3D-VAR Enabled use of 4m Qv for moisture assimilation from surface dewpoint observations Bug fix in soil adjustment for SST regions Three “bug" fixes in hydrometeor analysis (theta-v correction, limit of 100% saturation and corrected rain number concentration specification) Updated process_NSSL_mosaic.exe to revision 872 for additional bindary output Added ref2tten.exe at revision 875 for new TTEN pre-processing and set threshold at 28 dBZ and 20 min for latent heating strength (was 35 dBZ at 5 min strength) Updated UPP to revision 862 Added potential for additional output diagnostics of time-averaged wind/radiation (not enabled) ========================================================================== 2014-03-23: Curtis Alexander (06 UTC) Changed WPS METGRID.TBL to allow snowcover over frozen water Removed masked=water from five variables SNOW, SNOH, SNOWH, TSNOW, RHOSN ========================================================================== 2014-03-13: Curtis Alexander (05 UC) Updated UPP to revision 853 Added capability for lowest-level and 2m temp/dewpoint output (currently only lowest level diagnostic) Check to ensure 2m dewpoint < 2m temperature Relaxed restriction for ice pellets Binary I/O bug fixes Bug fixes for very small hydrometeor values and small pressure difference in lowest two vertical levels ========================================================================== 2013-09-24: Curtis Alexander (17 UTC) Updated WPS to remove use of SST from NCEP and use RAP SST instead ========================================================================== 2013-09-10: Curtis Alexander (00 UTC) Updated WRFv3.4.1 to revision 786 to include (1) Bug fix to RUCLSM diagnostic of canopy evaporation flux when coupled to MYNN PBL (2) Change in formulation of soil moisture availability Updated GSI to revision 784 to include (1) Removal of partial cloudiness code in analysis (2) Adjustment to limit snow mixing ratio retrieval to 3 g/kg in very cold regions with low reflectivity observations ========================================================================== 2013-04-10 (21 UTC) Updated VEGPARM.TBL to revision 732 to reduce roughness length for Urban category =========================================================================== 2013-03-13 (21 UTC) Updated UPP to revision 601 to handle 9 level RUC LSM Updated Vtable.RR, METRGRID.TBL and wrf.nl to handle 9 level RUC LSM input WRF namelist change: num_soil_layers = 9, (previously 6) num_metgrid_soil_levels = 9, (previously 6) Changed UPP to output 9 soil temp/moisture levels in wrf_cntrl.parm =========================================================================== 2013-03-11 (00 UTC) Updated WRFv3.3.1 to revision 682. (1) Bug fix from Greg Thomson for Goddard SW scheme (not currently used) to take into account snow mixing ratio in the computation of atmospheric optical depth. (2) Bug fixes in RUC LSM. (3) Allow for use of 9-level RUC LSM via namelist (not enabled). (4) Increased roughness length values for forests, cropland and urban categories in USGC and MODIS RUC LSM tables. (5) Added seasonal variations to leaf area index LAI and cropland roughtness length. Replaced weighted averaged roughness for each grid box with the exponential formulation from Mason (1980). (6) Added pre-DFI reflectivity calculation and moved RAINCV reset to after this calculation. (7) Turn off canopy water cycling. =========================================================================== 2013-01-22 (15 UTC) Conventional observations restored in 00z/12z HRRR initializations. =========================================================================== 2013-01-03 (20 UTC) Changed horizontal hydrometeor interpolation (metgrid) from 4 point bi-linear interpolation to nearest neighbor during pre-processing. This change includes cloud water, cloud ice, rain, snow, graupel and number concentrations for cloud ice and rain. =========================================================================== 2012-12-18 (12 UTC) Conventional observations removed from 00z/12z HRRR initializations. =========================================================================== 2012-11-27 (12 UTC) Conventional observations restored for 00z/12z HRRR initializations after transition from RUC to RAP at NCEP. =========================================================================== 2012-08-16 (19 UTC) UPP updated to revision 554 for diagnostic bug fix of 10 m U and V to use unstaggered values. =========================================================================== 2012-07-27 (15 UTC) UPP updated to use 11 dBZ echo top threshold in operational echo top field =========================================================================== 2012-07-10 (22 UTC) UPP updated to revision 552 to include monotonic pressure check bug fix. =========================================================================== 2012-07-07 (18 UTC) UPP updated to adjust echo top test field using 11 dBZ threshold in 18 dBZ mantle and interpolating to height =========================================================================== 2012-06-27 (04 UTC) UPP updated to adjust echo top test field using 12 dBZ threshold in 18 dBZ mantle and interpolating to height =========================================================================== 2012-06-20 (21 UTC) UPP updated to adjust echo top test field using 15 dBZ threshold in 18 dBZ mantle and interpolating to height =========================================================================== 2012-06-05 (05 UTC) WRF updated to revision 549 for change to lightning threat diagnostic =========================================================================== 2012-06-04 (05 UTC) UPP updated to produce new test echo top field in addition to original one using 10 dBZ threshold in 18 dBZ mantle and interpolating to height =========================================================================== 2012-05-01 (12 UTC) No conventional observations available for 00z/12z HRRR initializations after transition from RUC to RAP at NCEP. =========================================================================== 2012-04-26 (20 UTC) Updated UPP to revision 528 Bug fix to Radar VIL to limit calculations above -10 dBZ and provide zero values otherwise. =========================================================================== 2012-04-26 (16 UTC) Updated WRF to revsion 527 Added initialization of rain number concentration from RR via WPS =========================================================================== 2012-04-24 (07 UTC) Updated WPS to revision 526 Added ice and rain number concentrations to Vtable.RR Added rain number concentration to METGRID table Updated WRF to revision 524 Added initialization of ice number concentration from RR via WPS Switched to GRIB2 format for ungrib =========================================================================== 2012-04-09 (16 UTC) Updated WRF to revision 518 Disable lowest_lev_from_sfc in vertical interp of U and V fields from RR in real.exe to improve stability and avoid forecast degradation =========================================================================== 2012-03-31 (22 UTC) Decreased mp_tend_lim for improved stability New: mp_tend_lim = 0.07 Old: mp_tend_lim = 0.10 Added 64 cores for a total of 1128 cores (previous was 1064) for improved run time =========================================================================== 2012-03-31 (04 UTC) Decreased starting time step to 18 sec for improved stability New: max_time_step = 23 min_time_step = 20 starting_time_step = 18 Old: max_time_step = 23 min_time_step = 20 starting_time_step = 20 =========================================================================== 2012-03-19 (20 UTC) Updated WRF to revision 510 (only changes MYNN) Updated WRF to test new module_initialize_real.F to handle interpolation in complex terrain where application of using surface U,V from parent model results in unstable vertical shear profile and CFL violation. Increased minimum time step to 20 sec for improved runtime only. New: max_time_step = 23 min_time_step = 20 starting_time_step = 20 Old: max_time_step = 23 min_time_step = 18 starting_time_step = 18 =========================================================================== 2012-03-13 (01 UTC) Updated WRF to revision 506 (only changes MYNN) =========================================================================== 2012-03-12 (19 UTC) Updated WRF to test new module_initialize_real.F to handle interpolation in complex terrain where application of using surface U,V from parent model results in unstable vertical shear profile and CFL violation. =========================================================================== 2012-03-08 (00 UTC) Updated WRF to revision 501 Changes to MYNN scheme including scale height roughness relating to landuse and bulk transfer coefficient. Changes to snow roughness length and moisture availability in RUC LSM. Fix for frozen precip fraction in Thompson microphysics. =========================================================================== 2012-03-02 (14 UTC) Enabled fractional land use in WRF New: mosaic_lu = 1 mosaic_soil = 1 Old: mosaic_lu = 0 mosaic_soil = 0 =========================================================================== 2012-03-01 (16 UTC) Restored new 5th order vertical advection New: scalar_adv_opt = 1 V_MOM_ADV_ORDER = 5 V_SCA_ADV_ORDER = 5 Old: scalar_adv_opt = 2 V_MOM_ADV_ORDER = 3 V_SCA_ADV_ORDER = 3 =========================================================================== 2012-02-29 (22 UTC) Updated WPS/WRF to revision 491 (only changes to MYNN) Updated UPP to revision 492 Corrected GRIB encoding of 0-1km,0-6km shear,min/max vertical velocities Changed wrf_cntrl.parm New: (RADAR REFLECT - 1km ) SCAL=(-4.0) L=(10000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000) (MAX UPDRAFT HELICITY) SCAL=( 3.0) (GSD UPDRAFT HELICITY) SCAL=( 3.0) Old: (RADAR REFL AGL ) SCAL=(-4.0) L=(01000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000) (MAX UPDR HELICITY ) SCAL=( 3.0) (UPDRAFT HELICITY ) SCAL=( 3.0) Changed wrf_cnrl_subh.parm New: (RADAR REFLECT - 1km ) SCAL=(-4.0) L=(10000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000) (GSD UPDRAFT HELICITY) SCAL=( 3.0) Old: (RADAR REFL AGL ) SCAL=(-4.0) L=(01000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000) (UPDRAFT HELICITY ) SCAL=( 3.0) =========================================================================== 2012-02-29 (20 UTC) Testing old 3rd order verical advection timing New: scalar_adv_opt = 2 V_MOM_ADV_ORDER = 3 V_SCA_ADV_ORDER = 3 Old: scalar_adv_opt = 1 V_MOM_ADV_ORDER = 5 V_SCA_ADV_ORDER = 5 =========================================================================== 2012-02-28 (23 UTC) Updated WPS/WRF to revision 490 New Thompson reflectivity diagnostic with -3dB calibration Restored time step settings to previous values New: max_time_step = 23 min_time_step = 18 starting_time_step = 18 Old: max_time_step = 22 min_time_step = 22 starting_time_step = 22 =========================================================================== 2012-02-28 (17 UTC) Updated to WPS/WRFv3.3.1 revision 487 New Thompson reflectivity diagnostic with -2dB calibration Changed to 5th order (from 3rd) vertical advection Changed to positive-definite (from monotonic) advection Changed to 05 min (from 30 min) shortwave radiation updates Change initialize real.exe to use surface winds from donor model when vertically interpolating to recipient model Switched to MODIS land use (from USGS) Set minimum time step to 22 sec and match max time step New: radt = 05 scalar_adv_opt = 1 V_MOM_ADV_ORDER = 5 V_SCA_ADV_ORDER = 5 num_land_cat = 21 max_time_step = 22 min_time_step = 22 starting_time_step = 22 geo_em.d01.nc updated Old: radt = 30 scalar_adv_opt = 2 V_MOM_ADV_ORDER = 3 V_SCA_ADV_ORDER = 3 max_time_step = 23 min_time_step = 18 starting_time_step = 18 Updated UPP to revision 488 Includes option for MPI processing with bug fixes Initial precipitation array at F00 corrected Bug fix to downward short wave radiation at surface Bug fix to layer depths in storm-relative helicity calculations Corrrected 2m RH diagnostic to use 2m temp, dewpoint, press Merged version from NCEP for GRIB2 write capability =========================================================================== 2012-01-20 (20 UTC) Changed WRF w-damping option to Rayleigh damping new: damp_opt = 3, dampcoef = 0.2, old: damp_opt = 1, dampcoef = 0.02, =========================================================================== 2011-09-01 (22 UTC) Updated UPP to revision 384 to include improved visibility and cloud base diagnostic, and compute cloud fractions at all model levels and select pressure layers. =========================================================================== 2011-07-15 (20 UTC) Increased minimum and maximum time-step to ensure complete runs following completion of CFL testing and verification of no coherent change in forecast. new: max_time_step = 23 min_time_step = 18 old: max_time_step = 20 min_time_step = 15 =========================================================================== 2011-05-29 (00 UTC) SST data feed has been restored and is again used in the HRRR. =========================================================================== 2011-05-27 (22 UTC) Restored RR-primary as parent model for HRRRR following restoration of data feeds from NCEP/EMC. SST data is still unavailable and not used. =========================================================================== 2011-05-26 (22 UTC) Reverted HRRR to use RUC-backup as parent model while RR is unavailable due to problems at NCEP/EMC. =========================================================================== 2011-05-20 (17 UTC) Updated unipost to revision 346 to output new diagnostic variables including convective initiation and lightning fields. =========================================================================== 2011-05-17 (21 UTC) Updated WRF to revision 344 which includes modifications to diagnostic variables from Scott Dembek to handle adaptive time-stepping. =========================================================================== 2011-05-04 (18 UTC) Updated to WRF revision 339 which includes new diagnostic variables from Scott Dembek including convective initiation fields. =========================================================================== 2011-05-02 (21 UTC) Added TKE and Cloud Fraction to hourly post-processing. Added Radar VIL, VIL, Echo Top and Friction Velocity to hourly post-processing. =========================================================================== 2011-05-02 (16 UTC) Discontined sub-hourly NetCDF wrfouts with a temporary version of WRF revision 333. A single set of history (wrfout) files are now created every 15 minutes into the model forecast period. =========================================================================== 2011-04-14 (22 UTC) **** Switched the parent model from the RUC-backup to the RR-primary ****** Switched to higher resolution SST data (0.083 degrees). Raised the model pressure top from 85 mb to 20 mb. new: p_top_requested = 2000 old: p_top_requested = 8500 =========================================================================== 2011-04-14 (14 UTC) Enabled new sub-hourly processing of output in GRIB2 format. WRF will now generate full history files every 15 min which are then post-processed into GRIB1/2 files. Sub-hourly GRIB files are then concantinated into four valid times per hour. ========================================================================== 2011-04-14 (03 UTC) Updated WRF to revision 333. Changes mostly related to binary I/O and rebalance/save hydrometeor options after DFI which are not currently applicable in the HRRR. Updated Unipost to revision 326. ========================================================================== 2011-03-01 (05 UTC) Updated Unipost to revision 315. Corrected wind output to 80 m AGL which was set to 0 m AGL at the inception of Unipost in the HRRR at 21 UTC on 05 November 2010. ========================================================================== 2011-01-27 (21 UTC) Updated Unipost to revision 300. Change in precipitation type calculation to reduce areas of rain/snow mix. If snow fraction of overall water content of mixed precipitation exceeds 60% then all snow is reported. ========================================================================== 2011-01-21 (20 UTC) Disabled 6th order diffusion in WRF. new: diff_6th_opt = 0, diff_6th_factor = 0.25, old: diff_6th_opt = 2, diff_6th_factor = 0.25, ========================================================================== 2011-01-08 (00 UTC) Updated WRF to revision 282. Changes include evaporation/graupel bug fix to Thompson scheme, updated MYJ PBL to 3.2.1 version, RUC LSM initialized water vapor mix ratio at surface for cold start runs, and hydrostatic rebalance after WRF init. Updated unipost to revision 292. ========================================================================== 2010-12-21 (00 UTC) Changed xml workflow and WPS to increase efficiency of WRF pre-processing. Boundary conditions are now processed starting at 10 min after top of the hour using previous RUC cycle to generate initial wrfinput and wrfbdy file. Initial conditions are processed starting at 45 min after using only the RUC DDFI file to produce only a wrfinput file. da_update_bc is then executed to adjust tendencies in the first time frame of the wrfbdy file using DDFI wrfinput file prior to WRF start at 60 min. ========================================================================= 2010-12-16 (18 UTC) Updated unipost to revision 288. Added 2-m potential temperature and relative humidity with respect to precipitable water to post output and NCL graphics. Changed GRIB identifiers for 0-1 km and 0-6 km U,V shear to more representative values. ========================================================================== 2010-11-05 (19 UTC) Updated WPS to revision 220 Updated WRF to revision 246 Updated UPP to revision 244 WPS change includes capability to add residual to soil moisture if WRF is initalized from RUC. WRF changes include ability to compute and store cloud fraction, bug fix to advance through boundary conditions more efficiently, proper clearing of updraft helicity. Unipost processor enabled and WPP disabled. ========================================================================== 2010-06-09 (00 UTC) Reduced microphysics temperature tendency limit to avoid CFL in convection. new: mp_tend_lim = 0.1 old: mp_tend_lim = 0.75 ========================================================================== 2010-05-26 (00 UTC) Updated workflow to use 2-hr old RUC boundary conditions for HRRR 01/13 UTC cycles since 00/12 RUC cycles are delayed too long for 16 hr forecast availability. ========================================================================== 2010-05-07 (19 UTC) Updated WRF to revision 147 to incorporate a tiling bug fix. Tiling namelist option changed to increase to 8 tiles. new: numtiles = 8 old: numtiles = 4 ========================================================================== 2010-05-03 (20 UTC) Re-enabled tiling option new: numtiles = 4 old: numtiles = 1 ========================================================================== 2010-04-29 (22 UTC) Updated WRF to revision 138 which is merged import of WRFv3.2 into respository but is identical to version used as of 2010-04-14 23 UTC ========================================================================== 2010-04-29 (21 UTC) Updated WPS to revision 129 which is initial import of WPSv3.2 into repository but is identical to version used as of 2010-04-14 23 UTC ========================================================================== 2010-04-28 (20 UTC) Updated WPP to revision 128 to ensure dewpoint remains below temperature. ========================================================================== 2010-04-24 (17 UTC) Lowered pressure top again to avoid real failure with RUC native input. new: p_top_requested = 8500 old: p_top_requested = 6500 ========================================================================== 2010-04-24 (16 UTC) Decreased minimum time step to avoid crashing in convection. new: time_step = 18 starting_time_step = 18 max_time_step = 20 min_time_step = 15 old: time_step = 18 starting_time_step = 18 max_time_step = 20 min_time_step = 16 ========================================================================== 2010-04-23 (18 UTC) Shifted start/end WRF time to +85 min and +145 min (+20 min delay for WPS 15 hr processing including overlap with RR cycle) Shifted end post-proc time to +170 min ========================================================================== 2010-04-22 (19 UTC) Changed time-step to larger values to ensure completion of 15 hr fcsts while preventing crashes near Mt. Shasta. new: time_step = 18 starting_time_step = 18 max_time_step = 20 min_time_step = 16 old: time_step = 16 starting_time_step = 16 max_time_step = 18 min_time_step = 14 ========================================================================== 2010-04-20 (01 UTC) Disabled WRF tiling option pending bug fixes to microphysics scheme and 15min field code. ========================================================================== 2010-04-19 (22 UTC) Decreased time-step again to 14/16/18 sec due to crashing over Mt. Shasta. ========================================================================== 2010-04-16 (22 UTC) Added 128 cores to total of 1000 cores for WRF Shifted start/end WRF time to +75 min and +135 min (5 min delay for WPS) Extended forecast period to 15 hrs ========================================================================== 2010-04-14 (23 UTC) Changed WPS and WRF to v3.2 from v3.1.1 with RUC-like modifications. Extended time-step, raised pressure top, enabled tiling. new: time_step = 18 starting_time_step = 18 max_time_step = 22 min_time_step = 16 p_top_requested = 6500 numtiles = 8 old: time_step = 16 starting_time_step = 16 max_time_step = 18 min_time_step = 14 p_top_requested = 8500 ========================================================================== 2010-04-14 (18 UTC) Change (in RUC assimilation) dt_refl_heat (period over which latent heat is assumed to be released from all condensate estimated from radar reflectivity) from 1800s (1/3 heating) to 600s ("full heating"). ========================================================================== 2010-03-29 (20 UTC) Updated WPP to revision 126 to change GRIB parameter numbers ========================================================================== 2010-03-01 (21 UTC) Updated WPP to revision 124 to produce wind at 80 m AGL ========================================================================== 2010-02-24 (21 UTC) Updated WRF solve_em.F, Registry.EM (13 snapshots instead of 49) and wrf.nl to produce 15min wrfout files once every 3 forecast hours. Added surface pressure, 10 m wind, 2 m temperaure and dewpoint to output. new: auxhist2_outname = '15min_d_' auxhist2_begin_h = 3, auxhist2_interval = 180, nio_groups = 2, old: auxhist2_outname = 'VIL15min_d_' auxhist2_begin_h = 12, auxhist2_interval = 720, nio_groups = 1, ========================================================================== 2010-02-14 (00 UTC) Restored SST analysis to metgrid input on CONUS domain, absent since inception of CONUS domain ========================================================================== 2010-02-03 (03 UTC) Updated WRF and WPP to produce incoming shortwave radiation at surface and wind power generation at 80 m AGL ========================================================================== 2010-01-11 (23 UTC) Updated WRF v3.1.1 to revision 118 including bug fix for snow accumulation on sea ice. ========================================================================== 2009-12-14 (18 UTC) Updated WPP to change verbosity of debug statements. ========================================================================== 2009-12-10 (18 UTC) Updated WPP to fix a 2m dewpoint bug that caused WPP to fail. ========================================================================== 2009-12-08 (17 UTC) Updated WPP to fix a precipitation type bug that reversed sleet and freezing rain. ========================================================================== 2009-12-06 (17 UTC) Increased (lowered) requested pressure top to prevent top RUC level from dipping below requested pressure top causing real.exe to fail. new: p_top_requested = 8500 old: p_top_requested = 8000 ========================================================================== 2009-12-03 (15 UTC) Updated WRF-post to change to RUC-like precipitation type calculation. ========================================================================== 2009-12-02 (23 UTC) Update WRF v3.1.1 code to revision 109 including RUC LSM updates that pass regression tests at NCAR and add precipitation buckets. ========================================================================== 2009-11-17 (18 UTC) Increased (lowered) requested pressure top to prevent top RUC level from dipping below requested pressure top causing real.exe to fail. new: p_top_requested = 8000 old: p_top_requested = 7000 ========================================================================== 2009-10-23 (20 UTC) Updated CONUS HRRR WRF-post to change 2-m temp back to flux-based calculation and use new uni WRF-post GSD variables for MAPS MSLP etc... ========================================================================== 2009-10-19 (20 UTC) Changed GRIB output of CONUS HRRR to include mimic HRRR-large grids and updated file naming conventions in sfcextract_hrconus.ksh ========================================================================== 2009-10-16 (20 UTC) Updated CONUS HRRR WRF-post to change 2-m temp/dewpoint and 10-m wind diagnostic to use lowest model level. ========================================================================== 2009-10-14 (22 UTC) Added six sub-domains to CONUS HRRR web graphics including changes to ncl1h_hrconus.ksh ========================================================================== 2009-10-14 (16 UTC) Increased (lowered) requested pressure top to prevent top RUC level from dipping below requested pressure top causing real.exe to fail. new: p_top_requested = 7000 old: p_top_requested = 6500 ========================================================================== 2009-10-13 (22 UTC) Reduced time step on CONUS HRRR to prevent CFL violation in northern CA near i,j,k = 220,730,2 new: time_step = 16 starting_time_step = 16 max_time_step = 18 min_time_step = 14 old: time_step = 18 starting_time_step = 18 max_time_step = 22 min_time_step = 16 Increased # of processors to 840 from 740 ========================================================================== 2009-10-07 (21 UTC) Started developmental CONUS HRRR on njet using WRF v3.1.1 and 740 procs Initial domain size 1800x1060 gridpoints and 3.0 km grid spacing ========================================================================== 2009-04-23 Changes to the WPP code from Scott Dembek to output new variables. =========================================================================== 2009-04-20 (approximate date) fullHRRR by Tanya changed wrf.nl new: diff_6th_opt = 2 diff_6th_factor = 0.25 old: diff_6th_opt = 1 diff_6th_factor = 0.125 =========================================================================== 2009-04-13 Changes to the WRF code from Scott Dembek, NSSL. ========================================================================== 2009-03-28 More efficient way of VIL output. VIL became a 3-d array where 3rd dimention being a number of 15-min snapshops. There are 49 snapshots for 12-h forecast. The 3-d VIL is written out once at the end of the forecast. Cortesy Mei Xu, UCAR. ========================================================================== 2009-03-23 Switched from small HRRR in the NE US to a larger HRRR. (domain parameters are in /lfs0/projects/rtrr/DOMAINS/hrrr_large/static/namelist.wps) ========================================================================== 2008-08-04 Switch to version 3.01 of WRF. ========================================================================== 2008-04-29 Switch to use version 3.0 of WRF (WPS, WRF adn WPP) Made changes to produce VIL output (Registry/Registry.EM, dyn_em/solve_em.F, namelist.input) ========================================================================== pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy