[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20020401: gribtonc - no 600.000000 level for T



On Mon, 1 Apr 2002, Unidata Support wrote:

> 
> ------- Forwarded Message
> 
> >To: address@hidden
> >From: "Neil R. Smith" <address@hidden>
> >Subject: no 600.000000 level for T
> >Organization: TAMU
> >Keywords: 200204012252.g31MqWa08268 grib2nc avn-x.cdl
> 
> ldm v5.0.6
> 
> I'm getting the following type entries in our ldmd.log:
> 
> Apr 01 21:36:53 3Q:coriolis gribtonc[534654]: HTID60 KWBC 011800: In
> data/GRIB/02040118_avn-x.nc, no 600.000000 level for T
> 
> I'm using the avn-x.cdl from ftp site in pub/decoders/latestCDLs.
> Any idea what the cause might be? 
> Thanks, -Neil
> -- 

Neil,

The mods were made awhile ago, I forgot to send a message out to the list
with the changes.  I attached the file to this message, also it will be
in the latestCDLs directory. I don't have any excuses

  
Robb...




> Neil R. Smith, Comp. Sys. Mngr.               address@hidden
> Dept. Atmospheric Sci., Texas A&M Univ.       979/845-6272 FAX:979/862-4466
> 
> 
> ------- End of Forwarded Message
> 
> 

===============================================================================
Robb Kambic                                Unidata Program Center
Software Engineer III                      Univ. Corp for Atmospheric Research
address@hidden             WWW: http://www.unidata.ucar.edu/
===============================================================================
netcdf avn-x {          // 126 Wave, 18 Layer Spectral Model Aviation Run
                        // on expanded quasi-regular "thinned" grids

dimensions:

        record = UNLIMITED ;    // (reference time, forecast time)
        level = 12 ;

        lat = 73 ;              // latitude
        lon = 73 ;              // longitude
        lpdg = 1 ;              // boundary layer levels
        fhg = 2 ;               // fixed height above ground levels
        sigma = 1 ;              // sigma level
        datetime_len = 21 ;     // string length for datetime strings
        nmodels = 3 ;           // both AVN and SSIAVN models
        accum = 2 ;             // time range for accumulations
        nav = 1 ;               // For navigation.  Variables that use
                                // this dimension define a mapping between
                                // (lat, lon) indices and (lat, lon) coords.

        nav_len = 100 ;         // max string length for navigation strings

variables:

        double  reftime(record) ;       // reference time of the model
                reftime:long_name = "reference time" ;
                reftime:units = "hours since 1992-1-1" ;

        double  valtime(record) ;       // forecast time ("valid" time)
                valtime:long_name = "valid time" ;
                valtime:units = "hours since 1992-1-1" ;

        :record = "reftime, valtime" ;  // "dimension attribute" -- means
                                        // (reftime, valtime) uniquely
                                        // determine record

        char    datetime(record, datetime_len) ; // derived from reftime
                datetime:long_name = "reference date and time" ;
                // units YYYY-MM-DD hh:mm:ssZ  (ISO 8601)

        float   valtime_offset(record) ; // derived as valtime-reftime
                valtime_offset:long_name = "hours from reference time" ;
                valtime_offset:units = "hours" ;

        float   level(level) ;
                level:long_name = "level" ;
                level:units = "hectopascals" ;

        :lpdg = "lpdg_bot, lpdg_top" ; // (lpdg_bot, lpdg_top) uniquely
                                       // determines lpdg
                
        float   lpdg_bot(lpdg) ;
                lpdg_bot:long_name = "bottom level of boundary layer between 2 
levels at specified pressure differences from ground to levels" ;
                lpdg_bot:units = "hectopascals" ;
                
        float   lpdg_top(lpdg) ;
                lpdg_top:long_name = "top level of boundary layer between 2 
levels at specified pressure differences from ground to levels" ;
                lpdg_top:units = "hectopascals" ;

        float   fhg(fhg) ;               // fixed height above ground
                fhg:long_name = "fixed height above ground" ;
                fhg:units = "meters" ;

        float   sigma(sigma) ;           // fixed height above ground
                sigma:long_name = "sigma level" ;
                sigma:units = "" ;       // dimensionless

        long    model_id(nmodels) ;
                model_id:long_name = "generating process ID number" ;

        // The following lat and lon coordinate variables are redundant,
        // since the navigation variables provide the necessary information.
        // The extra information is included here for human readability.

        float   lat(lat) ;
                lat:long_name = "latitude" ;
                lat:units = "degrees_north" ;

        float   lon(lon) ;
                lon:long_name = "longitude" ;
                lon:units = "degrees_east" ;

        // navigation variables all use nav dimension

        char    nav_model(nav, nav_len) ;        // navigation parameterization
                nav_model:long_name = "navigation model name" ;

        int     grid_type_code(nav) ;
                grid_type_code:long_name = "GRIB-1 GDS data representation 
type" ;

        char    grid_type(nav, nav_len) ;
                grid_type:long_name = "GRIB-1 grid type" ;

        char    grid_name(nav, nav_len) ;
                grid_name:long_name = "grid name" ;

        int     grid_center(nav) ;
                grid_center:long_name = "GRIB-1 originating center ID" ;

        int     grid_number(nav) ;
                grid_number:long_name = "GRIB-1 catalogued grid numbers" ;
                grid_number:_FillValue = -9999 ;

        char    i_dim(nav, nav_len) ;
                i_dim:long_name = "longitude dimension name" ;

        char    j_dim(nav, nav_len) ;
                j_dim:long_name = "latitude dimension name" ;

        int     Ni(nav) ;
                Ni:long_name = "number of points along a latitude circle" ;

        int     Nj(nav) ;
                Nj:long_name =  "number of points along a longitude circle" ;

        float   La1(nav) ;
                La1:long_name = "latitude of first grid point" ;
                La1:units = "degrees_north" ;

        float   Lo1(nav) ;
                Lo1:long_name = "longitude of first grid point" ;
                Lo1:units = "degrees_east" ;

        float   La2(nav) ;
                La2:long_name = "latitude of last grid point" ;
                La2:units = "degrees_north" ;

        float   Lo2(nav) ;
                Lo2:long_name = "longitude of last grid point" ;
                Lo2:units = "degrees_east" ;

        float   Di(nav) ;
                Di:long_name = "Longitudinal direction increment" ;
                Di:units = "degrees" ;

        float   Dj(nav) ;
                Dj:long_name = "Latitudinal direction increment" ;
                Dj:units = "degrees" ;

        byte    ResCompFlag(nav) ;
                ResCompFlag:long_name = "resolution and component flags" ;

        // end of navigation variables

        float   P_maxwind(record, lat, lon) ;
                P_maxwind:long_name = "pressure at maximum wind" ;
                P_maxwind:units = "Pa" ;
                P_maxwind:_FillValue = -9999.f ;
                P_maxwind:navigation = "nav" ;

        float   P_trop(record, lat, lon) ;
                P_trop:long_name = "pressure at tropopause" ;
                P_trop:units = "Pa" ;
                P_trop:_FillValue = -9999.f ;
                P_trop:navigation = "nav" ;

        float   P_msl(record, lat, lon) ;
                P_msl:long_name = "pressure reduced to MSL" ;
                P_msl:units = "Pa" ;
                P_msl:_FillValue = -9999.f ;
                P_msl:navigation = "nav" ;

        float   P_sfc(record, lat, lon) ;
                P_sfc:long_name = "pressure at surface" ;
                P_sfc:units = "Pa" ;
                P_sfc:_FillValue = -9999.f ;
                P_sfc:navigation = "nav" ;

        float   RH(record, level, lat, lon) ;
                RH:long_name = "relative humidity" ;
                RH:units = "percent" ;
                RH:_FillValue = -9999.f ;
                RH:navigation = "nav" ;

        float   T(record, level, lat, lon) ;
                T:long_name = "temperature" ;
                T:units = "degK" ;
                T:_FillValue = -9999.f ;
                T:navigation = "nav" ;

        float   T_maxwind(record, lat, lon) ;
                T_maxwind:long_name = "temperature at maxwind" ;
                T_maxwind:units = "degK" ;
                T_maxwind:_FillValue = -9999.f ;
                T_maxwind:navigation = "nav" ;

        float   T_trop(record, lat, lon) ;
                T_trop:long_name = "temperature at tropopause" ;
                T_trop:units = "degK" ;
                T_trop:_FillValue = -9999.f ;
                T_trop:navigation = "nav" ;

        float   T_sigma(record, sigma, lat, lon) ;
                T_sigma:long_name = "temperature" ;
                T_sigma:units = "degK" ;
                T_sigma:_FillValue = -9999.f ;
                T_sigma:navigation = "nav" ;

        float   Z(record, level, lat, lon) ;
                Z:long_name = "geopotential height" ;
                Z:units = "gp m" ;
                Z:_FillValue = -9999.f ;
                Z:navigation = "nav" ;  // georeference info

        float   Z_maxwind(record, lat, lon) ;
                Z_maxwind:long_name = "geopotential height at maxwind" ;
                Z_maxwind:units = "gp m" ;
                Z_maxwind:_FillValue = -9999.f ;
                Z_maxwind:navigation = "nav" ;

        float   Z_trop(record, lat, lon) ;
                Z_trop:long_name = "geopotential height at tropopause" ;
                Z_trop:units = "gp m" ;
                Z_trop:_FillValue = -9999.f ;
                Z_trop:navigation = "nav" ;

        float   T_lpdg(record, lpdg, lat, lon) ;
                T_lpdg:long_name = "temperature in boundary layer" ;
                T_lpdg:units = "degK" ;
                T_lpdg:_FillValue = -9999.f ;
                T_lpdg:navigation = "nav" ;

        float   RH_lpdg(record, lpdg, lat, lon) ;
                RH_lpdg:long_name = "relative humidity in boundary layer" ;
                RH_lpdg:units = "percent" ;
                RH_lpdg:_FillValue = -9999.f ;
                RH_lpdg:navigation = "nav" ;

        float   u_lpdg(record, lpdg, lat, lon) ;
                u_lpdg:long_name = "u-component of wind in boundary layer" ;
                u_lpdg:units = "meters/second" ;
                u_lpdg:_FillValue = -9999.f ;
                u_lpdg:navigation = "nav" ;

        float   v_lpdg(record, lpdg, lat, lon) ;
                v_lpdg:long_name = "v-component of wind in boundary layer" ;
                v_lpdg:units = "meters/second" ;
                v_lpdg:_FillValue = -9999.f ;
                v_lpdg:navigation = "nav" ;

        float   u(record, level, lat, lon) ;
                u:long_name = "u-component of wind" ;
                u:units = "meters/second" ;
                u:_FillValue = -9999.f ;
                u:navigation = "nav" ;

        float   u_maxwind(record, lat, lon) ;
                u_maxwind:long_name = "u-component of wind at max wind" ;
                u_maxwind:units = "meters/second" ;
                u_maxwind:_FillValue = -9999.f ;
                u_maxwind:navigation = "nav" ;

        float   u_trop(record, lat, lon) ;
                u_trop:long_name = "u-component of wind at tropopause" ;
                u_trop:units = "meters/second" ;
                u_trop:_FillValue = -9999.f ;
                u_trop:navigation = "nav" ;

        float   v(record, level, lat, lon) ;
                v:long_name = "v-component of wind" ;
                v:units = "meters/second" ;
                v:_FillValue = -9999.f ;
                v:navigation = "nav" ;

        float   v_maxwind(record, lat, lon) ;
                v_maxwind:long_name = "v-component of wind at max wind" ;
                v_maxwind:units = "meters/second" ;
                v_maxwind:_FillValue = -9999.f ;
                v_maxwind:navigation = "nav" ;

        float   v_trop(record, lat, lon) ;
                v_trop:long_name = "v-component of wind at tropopause" ;
                v_trop:units = "meters/second" ;
                v_trop:_FillValue = -9999.f ;
                v_trop:navigation = "nav" ;

        float   u_fhg(record, fhg, lat, lon) ;
                u_fhg:long_name = "u-component of wind at fixed height above 
ground" ;
                u_fhg:units = "meters/second" ;
                u_fhg:_FillValue = -9999.f ;
                u_fhg:navigation = "nav" ;

        float   v_fhg(record, fhg, lat, lon) ;
                v_fhg:long_name = "v-component of wind at fixed height above 
ground" ;
                v_fhg:units = "meters/second" ;
                v_fhg:_FillValue = -9999.f ;
                v_fhg:navigation = "nav" ;

        float   RH_fhg(record, fhg, lat, lon) ;
                RH_fhg:long_name = "relative humidity at fixed height above 
ground" ;
                RH_fhg:units = "percent" ;
                RH_fhg:_FillValue = -9999.f ;
                RH_fhg:navigation = "nav" ;

        float   T_fhg(record, fhg, lat, lon) ;
                T_fhg:long_name = "temperature at fixed height above ground" ;
                T_fhg:units = "degK" ;
                T_fhg:_FillValue = -9999.f ;
                T_fhg:navigation = "nav" ;

        float   PRECIP(record, lat, lon) ;
                PRECIP:long_name = "total precipitation over accumulation 
interval" ;
                PRECIP:units = "kg/m2" ;
                PRECIP:_FillValue = -9999.f ;
                PRECIP:navigation = "nav" ;

        float   PRECIP_accum_times(record, accum) ;
                PRECIP_accum_times:long_name = "precipitation accumulation 
interval" ;
                PRECIP_accum_times:units = "hours" ;
                PRECIP_accum_times:_FillValue = -9999.f ;

        float   precip_cn(record, lat, lon) ;
                precip_cn:long_name = "convective precipitation over 
accumulation interval" ;
                precip_cn:units = "kg/m2" ;
                precip_cn:_FillValue = -9999.f ;
                precip_cn:navigation = "nav" ;

        float   precip_cn_accum_times(record, accum) ;
                precip_cn_accum_times:long_name = "convective precipitation 
accumulation interval" ;
                precip_cn_accum_times:units = "hours" ;
                precip_cn_accum_times:_FillValue = -9999.f ;

        float   omega(record, level, lat, lon) ;
                omega:long_name = "pressure vertical velocity" ;
                omega:units = "Pa/s" ;
                omega:_FillValue = -9999.f ;
                omega:navigation = "nav" ;      // georeference info

        float   absvor(record, level, lat, lon) ;
                absvor:long_name = "absolute vorticity" ;
                absvor:units = "1/s" ;
                absvor:_FillValue = -9999.f ;
                absvor:navigation = "nav" ;

// global attributes:
                :history = "created by gribtonc from HRS broadcast" ;
                :title = "NMC Global Product Set" ;
                :Conventions = "NUWG" ;
                :version = 0.0 ;                // still just a draft

data:

 level = 1000, 850, 700, 600, 500, 400, 300, 250, 200, 150, 100, 70 ;
 lpdg_bot =  0 ;
 lpdg_top = 30 ;
 fhg = 2, 10 ;
 sigma = 0.9950 ;
 model_id = 77, 81, 96;

 // Navigation
 nav_model = "GRIB1" ;
 grid_type_code = 0 ;
 grid_type  = "Latitude/Longitude" ;
 grid_name = "Global 5.0 x 2.5 degree grid" ;
 grid_center = 7 ;   // NMC
 grid_number = 255 ;   // from expanding thinned grids
 i_dim = "lon" ;
 j_dim = "lat" ;
 Ni = 73 ;
 Nj = 73 ;
 La1 = -90.0 ;
 Lo1 = -30.0 ;
 La2 = 90.0 ;
 Lo2 = 240.0 ;
 Di = 5.0 ;
 Dj = 2.5 ;
 ResCompFlag = 128 ;

 lon =  -30, -25, -20, -15, -10,  -5,   0,   5,  10,  15,  20,  25,
         30,  35,  40,  45,  50,  55,  60,  65,  70,  75,  80,  85,  
         90,  95, 100, 105, 110, 115, 120, 125, 130, 135, 140, 145, 
        150, 155, 160, 165, 170, 175, 180,-175,-170,-165,-160,-155,
       -150,-145,-140,-135,-130,-125,-120,-115,-110,-105,-100, -95,
        -90, -85, -80, -75, -70, -65, -60, -55, -50, -45, -40, -35, -30 ;

 lat = -90.0,-87.5,-85.0,-82.5,-80.0,-77.5,-75.0,-72.5,
       -70.0,-67.5,-65.0,-62.5,-60.0,-57.5,-55.0,-52.5,
       -50.0,-47.5,-45.0,-42.5,-40.0,-37.5,-35.0,-32.5,
       -30.0,-27.5,-25.0,-22.5,-20.0,-17.5,-15.0,-12.5,
       -10.0, -7.5, -5.0, -2.5,  0.0,  2.5,  5.0,  7.5,
        10.0, 12.5, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5,
        30.0, 32.5, 35.0, 37.5, 40.0, 42.5, 45.0, 47.5,
        50.0, 52.5, 55.0, 57.5, 60.0, 62.5, 65.0, 67.5,
        70.0, 72.5, 75.0, 77.5, 80.0, 82.5, 85.0, 87.5, 90.0 ;
}

pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy