[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20000814: 20000810: Satellite imagery with Garp



Pat,

First, I'm assuming you are launching garp from the NTL
launcher to ensure that the color table is guaranteed-
if not, make sure you launchg garp that way.

I have a solaris binary of garp under:
~gbuddy/nawips-5.4/binary/solaris/garp

If you can ftp that to your /tmp directory and
"chmod 775 garp", then run it with /tmp/garp
(ensuring that your ntl has been launched first)
we can see if the same problem exists using my binary.

Otherwise, I don't see a problem with your GOES-8 directory.

Steve Chiswell


>From: Local Data Manager <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200008142024.e7EKOdN13936

>> 
>> >From: Local Data Manager <address@hidden>
>> >Organization: UCAR/Unidata
>> >Keywords: 200008141326.e7EDQIN21293
>> 
>> >Steve:
>> >
>> >I performed the cd $SAT and ls -R and all of the files came up with a
>> >YYYY configuration, as my Garp_defaults file commands.  GARP still
>> >crashes.
>> >
>> >Pat
>> >
>> 
>> 
>> Pat,
>> 
>> You might try shortening the list of directories that sat searches
>> as I mentioned previously. It could be that your path is too long.
>> Do we have a core dump? If so, that will tell us where the program
>> is bombing. Otherwise, please send me the output from ls -R as well 
>> as your Garp_defaults file.
>> 
>> Steve Chiswell
>> ****************************************************************************
>> Unidata User Support                                    UCAR Unidata Program
>> (303)497-8644                                                  P.O. Box 3000
>> address@hidden                                   Boulder, CO 80307
>> ----------------------------------------------------------------------------
>> Unidata WWW Service                        http://www.unidata.ucar.edu/     
>> ****************************************************************************
>> 
>
>Steve:
>
>I have shortened our list of directories to search to just one, GOES-8, and it
>  still
>does not work.  I cannot find a core in any of the usual spots, so I think it 
> may be
>the path.  A typical one would be something like:
>
>  /asp/met/data/ldm/gempak/images/sat/GOES-8/8km/6.8
>
>Below is the output of ls -R in $SAT, and the Garp_defaults file.  Thanks for 
> your
>help.
>
>::::::
>ls -R
>::::::
>
>Isentropic Highlander =>cd $SAT
>/asp/met/data/ldm/gempak/images/sat
>Isentropic Highlander =>ls -R
>ANTARCTIC       GOES-8          GOES-8_fl2      MOLL-IR
>GOES-10         GOES-8_fl1      MDR             MOLL-WV
>
>ANTARCTIC:
>20km
>
>ANTARCTIC/20km:
>10.7    IR
>
>ANTARCTIC/20km/10.7:
>10.7_20000813_1800      10.7_20000814_0000      10.7_20000814_0600      10.7_2
> 0000814_1200
>10.7_20000813_2100      10.7_20000814_0300      10.7_20000814_0900      10.7_2
> 0000814_1500
>
>ANTARCTIC/20km/IR:
>
>GOES-10:
>4km     8km
>
>GOES-10/4km:
>0.65    10.7    IR      VIS
>
>GOES-10/4km/0.65:
>0.65_20000813_2000      0.65_20000814_0300      0.65_20000814_1600      0.65_2
> 0000814_1900
>0.65_20000813_2100      0.65_20000814_1400      0.65_20000814_1700
>0.65_20000813_2300      0.65_20000814_1500      0.65_20000814_1800
>
>GOES-10/4km/10.7:
>10.7_20000813_2000      10.7_20000814_0400      10.7_20000814_1000      10.7_2
> 0000814_1500
>10.7_20000813_2100      10.7_20000814_0500      10.7_20000814_1100      10.7_2
> 0000814_1600
>10.7_20000813_2300      10.7_20000814_0600      10.7_20000814_1200      10.7_2
> 0000814_1700
>10.7_20000814_0100      10.7_20000814_0700      10.7_20000814_1300      10.7_2
> 0000814_1800
>10.7_20000814_0300      10.7_20000814_0800      10.7_20000814_1400      10.7_2
> 0000814_1900
>
>GOES-10/4km/IR:
>
>GOES-10/4km/VIS:
>
>GOES-10/8km:
>6.8     WV
>
>GOES-10/8km/6.8:
>6.8_20000813_1900       6.8_20000814_0200       6.8_20000814_0800       6.8_20
> 000814_1500
>6.8_20000813_2000       6.8_20000814_0300       6.8_20000814_1000       6.8_20
> 000814_1600
>6.8_20000813_2100       6.8_20000814_0400       6.8_20000814_1100       6.8_20
> 000814_1700
>6.8_20000813_2200       6.8_20000814_0500       6.8_20000814_1200       6.8_20
> 000814_1800
>6.8_20000814_0000       6.8_20000814_0600       6.8_20000814_1300       6.8_20
> 000814_1900
>6.8_20000814_0100       6.8_20000814_0700       6.8_20000814_1400       6.8_20
> 000814_2000
>
>GOES-10/8km/WV:
>
>GOES-8:
>4km     8km
>
>GOES-8/4km:
>0.65    10.7    IR      VIS
>
>GOES-8/4km/0.65:
>0.65_20000813_2015      0.65_20000814_1115      0.65_20000814_1415      0.65_2
> 0000814_1715
>0.65_20000813_2215      0.65_20000814_1215      0.65_20000814_1515      0.65_2
> 0000814_1815
>0.65_20000814_1015      0.65_20000814_1315      0.65_20000814_1615      0.65_2
> 0000814_1915
>
>GOES-8/4km/10.7:
>10.7_20000813_2015      10.7_20000814_0515      10.7_20000814_1015      10.7_2
> 0000814_1515
>10.7_20000814_0115      10.7_20000814_0615      10.7_20000814_1115      10.7_2
> 0000814_1615
>10.7_20000814_0215      10.7_20000814_0715      10.7_20000814_1215      10.7_2
> 0000814_1715
>10.7_20000814_0315      10.7_20000814_0815      10.7_20000814_1315      10.7_2
> 0000814_1815
>10.7_20000814_0415      10.7_20000814_0915      10.7_20000814_1415      10.7_2
> 0000814_1915
>
>GOES-8/4km/IR:
>
>GOES-8/4km/VIS:
>
>GOES-8/8km:
>6.8     WV
>
>GOES-8/8km/6.8:
>6.8_20000813_2015       6.8_20000814_0215       6.8_20000814_0915       6.8_20
> 000814_1515
>6.8_20000813_2115       6.8_20000814_0315       6.8_20000814_1015       6.8_20
> 000814_1615
>6.8_20000813_2215       6.8_20000814_0415       6.8_20000814_1115       6.8_20
> 000814_1715
>6.8_20000813_2315       6.8_20000814_0515       6.8_20000814_1215       6.8_20
> 000814_1815
>6.8_20000814_0015       6.8_20000814_0715       6.8_20000814_1315       6.8_20
> 000814_1915
>6.8_20000814_0115       6.8_20000814_0815       6.8_20000814_1415
>
>GOES-8/8km/WV:
>
>GOES-8_fl1:
>1km     4km
>
>GOES-8_fl1/1km:
>0.65    VIS
>
>GOES-8_fl1/1km/0.65:
>0.65_20000813_1915      0.65_20000813_2315      0.65_20000814_1415      0.65_2
> 0000814_1815
>0.65_20000813_2015      0.65_20000814_1115      0.65_20000814_1515      0.65_2
> 0000814_1915
>0.65_20000813_2115      0.65_20000814_1215      0.65_20000814_1615
>0.65_20000813_2215      0.65_20000814_1315      0.65_20000814_1715
>
>GOES-8_fl1/1km/VIS:
>
>GOES-8_fl1/4km:
>3.9
>
>GOES-8_fl1/4km/3.9:
>3.9_20000814_0015       3.9_20000814_0415       3.9_20000814_0715       3.9_20
> 000814_1015
>3.9_20000814_0215       3.9_20000814_0515       3.9_20000814_0815
>3.9_20000814_0315       3.9_20000814_0615       3.9_20000814_0915
>
>GOES-8_fl2:
>1km     4km
>
>GOES-8_fl2/1km:
>0.65    VIS
>
>GOES-8_fl2/1km/0.65:
>0.65_20000813_1915      0.65_20000813_2315      0.65_20000814_1415      0.65_2
> 0000814_1815
>0.65_20000813_2015      0.65_20000814_0115      0.65_20000814_1515      0.65_2
> 0000814_1915
>0.65_20000813_2115      0.65_20000814_1215      0.65_20000814_1615
>0.65_20000813_2215      0.65_20000814_1315      0.65_20000814_1715
>
>GOES-8_fl2/1km/VIS:
>
>GOES-8_fl2/4km:
>3.9
>
>GOES-8_fl2/4km/3.9:
>3.9_20000814_0215       3.9_20000814_0515       3.9_20000814_0815       3.9_20
> 000814_1115
>3.9_20000814_0315       3.9_20000814_0615       3.9_20000814_0915
>3.9_20000814_0415       3.9_20000814_0715       3.9_20000814_1015
>
>MDR:
>5km
>
>MDR/5km:
>MDR
>
>MDR/5km/MDR:
>MDR_20000813_1859       MDR_20000814_0259       MDR_20000814_0959       MDR_20
> 000814_1659
>MDR_20000813_1959       MDR_20000814_0359       MDR_20000814_1059       MDR_20
> 000814_1759
>MDR_20000813_2059       MDR_20000814_0459       MDR_20000814_1159       MDR_20
> 000814_1859
>MDR_20000813_2159       MDR_20000814_0559       MDR_20000814_1259       MDR_20
> 000814_1959
>MDR_20000813_2259       MDR_20000814_0659       MDR_20000814_1359
>MDR_20000814_0059       MDR_20000814_0759       MDR_20000814_1459
>MDR_20000814_0159       MDR_20000814_0859       MDR_20000814_1559
>
>MOLL-IR:
>56km
>
>MOLL-IR/56km:
>10.7
>
>MOLL-IR/56km/10.7:
>10.7_20000813_1800      10.7_20000814_0300      10.7_20000814_1200
>10.7_20000813_2100      10.7_20000814_0600      10.7_20000814_1500
>10.7_20000814_0000      10.7_20000814_0900      10.7_20000814_1800
>
>MOLL-WV:
>56km
>
>MOLL-WV/56km:
>6.8
>
>MOLL-WV/56km/6.8:
>6.8_20000813_1800       6.8_20000814_0300       6.8_20000814_0900       6.8_20
> 000814_1500
>6.8_20000813_2100       6.8_20000814_0600       6.8_20000814_1200       6.8_20
> 000814_1800
>Isentropic Highlander =>
>
>
>:::::::::::::
>Garp_defaults
>:::::::::::::
>
>
>#
># Garp configuration file
>#  VERSION 2.0
>#
># The syntax needed in the file is:
>#
>#  token : resource
>#
>#  where: 
>#
>#         - token is defined as a string delimited by white space or ","
>#         - the delimiter between token and resource is the :,
>#         - no white space needs to surround the delimiter,
>#         - comments are indicated by a #,
>#           neither token nor resource can begin with a # or :,
>#           however a # or a : can be embedded within resource,
>#         - resource can contain white space if it is bounded by
>#           the ' or " characters,
>#         - blank lines are allowed.
>#         - referbacks are indicated by $(...). The '...' is resolved
>#           the same way any other token is, and is substituted for
>#           the $(...) string to compose the final resource value.
>#         - Multiple referbacks are allowed in a resource, but
>#           embedded referbacks are not allowed  (i.e. no
>#           $($(...)) allowed).
>#         - case for the token is significant
># LOG:
># D.Himes/COMET  4/96    Beta dist version
># P.Bruehl/NWS   4/96    Documented, reorganized
># P.Bruehl/NWS   5/96    Added SD's keys for file names
># P.Bruehl/NWS  5/96   Updated for GARP release 0.1
># P.Bruehl/NWS  8/96   Updated for GARP release 0.2
># J.Cowie/NWS   10/96   Updated for GARP release 1.0
># S.Drake/COMET  1/97  Added keys for upper air profile object.
># P.Bruehl/NWS   1/97    Updated for GARP 1.03 release
># S.Drake/COMET  4/97    Added keys for 1.0.4
># P.Bruehl/NWS   4/97    Updated for GARP 1.04 release
># S.Chiswell/Unidata 5/97 New & corrected map areas and projections
># S.Drake/COMET  7/97    Added keys for GARP release 2.0
># S.Drake/COMET 10/98   Added wind profiler keys for release 2.02
># S.Drake/COMET  8/99   Removed chapter "default" from FDF directories
>#-----------------------------------------------------------------------
>#
>#  Data directory Structures
>#  Case is important
>#  Configure these to match your data directory structure
>#  (Surface data directories defined later)
>#
>GARPHOME       : $(NAWIPS)/garp/
>
>SATDIR          : $(SAT)
>RADDIR          : $(GEMDATA)/nexrad
>grids           : $(HDS)
>upperair        : $(GEMDATA)/upperair
>profiler        : $(GEMDATA)/profiler
>surface                : $(GEMDATA)/surface
>
>#
>#  Provide extra information for the satellite data
>#
>#  List each individual satellite directory
>#  Multiple entries are space separated
>#
>G7    : "$(SATDIR)/GOES-7"
>G8    : "$(SATDIR)/GOES-8"
>G9    : "$(SATDIR)/GOES-9"
>G10   : "$(SATDIR)/GOES-10"
>FLOAT1 : "$(SATDIR)/GOES-8_fl1 $(SATDIR)/GOES-9_fl1 $(SATDIR)/GOES-10_fl1"
>FLOAT2 : "$(SATDIR)/GOES-8_fl2 $(SATDIR)/GOES-9_fl2 $(SATDIR)/GOES-10_fl2"
>SPOLE  : "$(SATDIR)/ANTARCTIC"
>GINI  : "$(SATDIR)/GINI-E $(SATDIR)/GINI-W $(SATDIR)/Colorado $(SATDIR)/COMP $
> (SATDIR)/GINI-US $(SATDIR)/GINI-PR $(SATDIR)/GINI-HI $(SATDIR)/GINI-PAC $(SAT
> DIR)/Alaska"
>#GMS   : "$(SATDIR)/GMS_RAM"
>COMPOSITE : "$(SATDIR)/comp"
>MDR   : "$(SAT)/MDR"
>
>#
>#  sat, nids, and nowrad are the "keys" that are used to find
>#  the image data directories
>#
>#  Be sure each individual satellite directory listed above is in
>#  the "sat" key list
>#
>#sat             : "$(G8) $(G10) $(MDR) $(FLOAT1) $(FLOAT2)"
>sat             : "$(G8)"
>nids            : $(RADDIR)/NIDS
>nowrad          : $(RADDIR)/USRAD
>
>#
>#  File name keys
>#  Upper air & profile only
>#  (keys for surface and model data files are defined later)
>#
>#  These key values correspond to the "type" substring in the file 
>#  name convention for a upper air & profile data types.  For example,
>#  YYMMDD_"type".gem
>#
>#  Note, you must choose a unique key value to describe each data type.
>#  For example the key "upa" will match ALL data filenames containing 
>#  the string "upa".
>#
>upperairK       : upa
>profilerK      : 6min
>
>#
># Dynamically generated menus.
>#
># Models, Vertical coordinates, Color contours, Color fill tables, 
># Font types & sizes, Station Overlays, Surface keys, Markers, 
># Image Maps, Geographical areas & projections, FDF chapters, line
># parameters, vector symbols, x-sec vertical axes, vertical 
># profile vert axes, time/height time axes.
>#-------------------------------------------------------------
># Models
>#
># List all models for GARP to display.  Objective Analysis grids
># are OK.  Make up a name for "modellabels". The corresponding 
># string in "modelkeys" must make a unique match to files in the
># $(grids) directory.
>#
># For example, the string "eta" matches YYMMDDHH_eta.gem *and* 
># YYMMDDHH_mesoeta.gem. Better choices are "_mesoeta" and "_eta".
>#
>modelkeys      : "_thin,_avn,_eta,_mrf,_nhmrf,_ngm,_ruc,_ecmwf1,_ecmwf2"
>modellabels    : "AVN_Thin,AVN_211,Eta_211,MRF_EXT,MRF_NH,NGM_211,RUC_211,ECMW
> F_G,ECMWF_T"
>#modelkeys     : "thin,avn003,eta211,eta212,mrf003,mrf002,ngm211,ruc211,maps,e
> ns,gdas,ecmf1"
>#modellabels   : "AVN,AVN Grid3,Eta 211,Eta 212,MRF,MRF_EXT,NGM,RUC,RUC II,Ens
> emble,GDAS,ECMWF"
>#
>#-------------------------------------------------------------
># Vertical coordinate keys for plan view.
>#
>vcoordkeys     : "pres,sgma,thta,hght,none,none,hagl,pagl,frzl,trop,mwsl"
>vcoordlabels   : "Pressure,Sigma,Isentropic,Height,Surface,None,Hght agl,Press
>  agl,Freezing Lvl,Tropopause,Max Wind Speed"
>#
>#-------------------------------------------------------------
># Vertical coordinate keys for vertical profiles.
>#
>vpvcoordkeys   : "pres,sgma,thta,hght"
>vpvcoordlabels : "Pressure,Sigma,Isentropic,Height"
>#
>#-------------------------------------------------------------
># List colors to be used for contour lines, symbols, etc. 
># Use no more that 10 GEMPAK colors in list.
>#
>colorlist      : "3,6,5,2,4,7,8"
>#
>#-------------------------------------------------------------
># Color fill tables
>#
>#colorfillkeys : "0;23-15,0;25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,0;23;22
> ;21;2"
>#colorfilllabels       : "Table 1,Table 2,Table 3,Table 4,Table 5"
>colorfillkeys   : "0;21-30,0;14-20,25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,
> 0;23;22;21;2"
>colorfilllabels : "Cool,Hot,Table 1,Table 2,Table 3,Table 4"
>#
>#-------------------------------------------------------------
># Font type, size and hardware/software flag.  (See "Font" entry
># in Chapter 3 of the NAWIPS Users Manual for help.)
>#
>text_size      : 1.3
>text_font      : 21
>text_width     : 1
>text_hw_flag   : hw
>#
>#-------------------------------------------------------------
># Station overlays
>#
>stn_tables: "0,1,2,3,4,5,6,7"
>stn_labels: "Surface Airways,WFO,NEXRAD,Wind Profiler,Upper Air Stations,Count
> ies,Local,Cities"
>#-------------------------------------------------------------
># Surface keys 
>#
># sfc_keys - Strings corresponding to the unique "type" substring in
>#  the filename convention for a given surface data type.  
>#  For example, YYMMDD_"type".gem: 980101_sao.gem, 980101_shb.gem
>#
># sfc_labels - Labels corresponding to above sfc_keys.
>#
># sfc_tables - Tables containing complete list of all valid parameters
>#   for a given surface data type.  Corresponds to sfc_keys and sfc_labels.
>#
># xxx_dir - Directory containing surface data files of the xxx type
># xxx_parms - Default list of parameters plotted for the xxx data type
>#
># Examples:
># sfc_keys: "surf,shb,amos,mmos,nmos,ffg,sels,ltg"
># sfc_labels: "METAR,Ship/Buoy,AVN MOS,MRF MOS,NGM MOS,Flash Flood,Storm Warni
> ngs,Lightning"
># sfc_tables: "sfcparms.lst,shbparms.lst,amosparms.lst,mmosparms.lst,nmosparms
> .lst,
># ffgparms.lst,selsparms.lst,"
># surf_dir : $(METDAT)/gempak/surface
># shb_dir : $(METDAT)/gempak/surface
># amos_dir : $(METDAT)/gempak/mos
># nmos_dir : $(METDAT)/gempak/mos
># mmos_dir : $(METDAT)/gempak/mos
># ffg_dir : $(METDAT)/gempak/flood
># sels_dir : $(METDAT)/gempak/storm
># surf_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;B
> RBK:1.0:1"
># shb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
># amos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
># mmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
># nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
># ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
># sels_parms: "STID"
>#
>sfc_keys : "sao,syn,sb,amos,mmos,nmos,ffg,nldn"
>sfc_labels : "METAR,Synoptic,Ship / Buoy,AVN MOS, MRF MOS,NGM MOS,Flash Flood,
> Lightning"
>sfc_tables : "sfcparms.lst,shbparms.lst,shbparms.lst,amosparms.lst,mmosparms.l
> st,nmosparms.lst,ffgparms.lst,nldn.lst"
>sao_dir        : $(GEMDATA)/surface
>syn_dir : $(GEMDATA)/surface
>sb_dir : $(GEMDATA)/surface
>amos_dir : $(GEMDATA)/mos
>nmos_dir : $(GEMDATA)/mos
>mmos_dir : $(GEMDATA)/mos
>ffg_dir : $(GEMDATA)/storm/ffg
>nldn_dir : $(GEMDATA)/nldn
>sao_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK
> :1.0:1"
>syn_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK
> :1.0:1"
>sb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
>amos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
>mmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
>nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
>ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
>ltg_parms: "POLR"
>nldn_parms: "STID"
>#
>#-------------------------------------------------------------
># Suface Markers & Filter factor
>#
># List of available marker types and the corresponding labels.
># (See "Marker" entry in Chapter 3 of the NAWIPS Users Guide
># for help.)
>#
># Default filter factor for surface data. 1 = no overlaping
># stations; 0 = all stations plotted, regardless of overlap.
># (See "Filter" entry in Chapter 3 of the NAWIPS Users Guide
># for help.)
>#
>sfc_markers: "3,4,6,14"
>sfc_marker_labels: "Triangle,Box,Diamond,Star"
>sfc_filter: 1
>#
>#-------------------------------------------------------------
># Image maps
>#
># Background images that you can plot along with model and obs
># data.  You may have to manually select the color enhancement 
># (unidat_top) for these images.
>#
># NOTE that these are IMAGES, and can't be combined (yet) with 
># other images such as satellite or radar data.  
>#
># These images require 128 image colors.  To get this, you 
># must start ntl with 128 satellite colors.  This is the
># default in NAWIPS 5.4.
>#
>colormapdir    : $(GARPHOME)/map/areas
>colormapkeys   : "topo_goes8.area,topo_goes9.area,topo_na.area,topo_nh.area,to
> po_sh.area,topo_wh.area,topo_norcal.area,topo_VA.area,topo_CO.area,topo_centr
> alRockies.area,topo_MN.area,topo_midwest.area,topo_southwestUS.area"
>colormaplabels : "GOES-8,GOES-9,North America,Northern Hemisphere,Southern Hem
> isphere,Hemisphere,Northern California,Virginia,Colorado,Central Rockies,Minn
> esota,Midwest,Southwest"
>#
>#-------------------------------------------------------------
># Geographic areas
>#
># You can now configure the regions, projections, and GAREAs of all the
># regions available under the AREA pull-down menu.  Here are some starting
># examples.  You may configure them.
>#
>MapLabels      : "DEFAULT,Northern Hemisphere,North America,CONUS,Northeast,So
> utheast,North Central,South Central,Northwest,Southwest,Canada,Alaska,Hawaii,
> Pacific,Asia,Australia,South America,Africa,Europe,South Pole,North Pole"
>
>MapProjection  : "DEFAULT,str/90;-120;10,str/90.0;-100;0.0,lcc/30.0;-100;50.0,
> lcc/30.0;-80;50.0,lcc/30.0;-85;50.0,lcc/30.0;-100;50.0,lcc/30.0;-100;50.0,lcc
> /30.0;-110;50.0,lcc/30.0;-110;50.0,STR/90.00;-98.00;0.00,STR/90.00;-170.00;0.
> 00,CED,lea/25;-155;0,str/60;90;0,str/-60;135;0,str/-60;-50;0,lea/-25;15;5,str
> /60;30;0,str/-90;0;0,str/90;-90;0"
>
>MapGarea       : "DEFAULT,-10;-170;-10;10,10;-130;50;-30,23.0;-120.0;47.0;-65.
> 0,35;-90;48;-65,24.00;-95.00;38.00;-73.00,36.00;-112.00;50.00;-86.00,25.00;-1
> 10.00;40.00;-85.00,37.00;-125.00;50.00;-105.00,25.00;-122.00;40.00;-95.00,#48
> .00;-72.00;12.00;61.00,50.00;-180.00;60.00;-110.00,#20.50;-157.00;2.50;3.00,#
> 25;-155;40;55,0;60;60;170,-45;90;0;170,-45;-100;15;-25,-30;-10;40;55,30;5;70;
> 60,20;-135;20;45,-20;-135;-20;45"
>#
># 
># Default map areas and projections for each model type.  Use the 
># string defined in "modelkeys" to specify the model.  If no spec
># exists for a given model, default_proj and default_garea are used.
>#
>avn_proj       : str/90.0;-100;0.0
>avn_garea      : 10;-130;50;-30
>avn003_proj        : str/90;-120;10
>avn003_garea       : -10;-170;-10;10
>eta211_proj    : lcc/30.0;-100;50.0
>eta211_garea   : 23.0;-120.0;47.0;-65.0
>eta.gem_proj    : lcc/30.0;-100;50.0
>eta.gem_garea   : 23.0;-120.0;47.0;-65.0
>e10_proj       : mer/27;-126;45;-106
>e10_garea      : 27;-126;45;-106
>ngm_proj        : lcc/30.0;-100;50.0
>ngm_garea       : 23.0;-120.0;47.0;-65.0
>ngm211_proj        : lcc/30.0;-100;50.0
>ngm211_garea       : 23.0;-120.0;47.0;-65.0
>mrf003_proj        : str/90;-120;10
>mrf003_garea       : -10;-170;-10;10
>mrf002_proj        : str/90;-120;10
>mrf002_garea       : -10;-170;-10;10
>mrf_proj       : str/90;-120;10
>mrf_garea      : -10;-170;-10;10
>ruc.gem_proj   : lcc/30.0;-100;50.0
>ruc.gem_garea  : 23.0;-120.0;47.0;-65.0
>rsas_proj      : lcc/30.0;-100;50.0
>rsas_garea     : 23.0;-120.0;47.0;-65.0
>ens_proj   : str/90;-120;10
>ens_garea  : -10;-170;-10;10
>ruc211_proj     : lcc/30.0;-100;50.0
>ruc211_garea    : 23.0;-120.0;47.0;-65.0
>maps_proj       : lcc/30.0;-100;50.0
>maps_garea      : 23.0;-120.0;47.0;-65.0
>default_proj   : lcc/30.0;-100;50.0
>default_garea  : 23.0;-120.0;47.0;-65.0
>#
>#-------------------------------------------------------------
># FDF & Macro chapters. 
>#
># These chapters are subdirectories which discriminate between
># families of FDFs and macros. For each list of chapters, you 
># must also define a list of button labels.
>#
># Scalar, Vector, XSScalar (scalar cross section), XSVector
># (vector cross section), THScalar (time/height scalar), THVector 
># (time/height vector), VPScalar (vertical profile scalar),
># VPVector (vertical profile vector).
>#
>ScalarChapter  : general,convective,HAS,isentropic,maxT_est,macros,macros_850m
> b,macros_700mb,macros_500mb,macros_250mb
>SCLabels       : General,Convective,HAS,Isentropic,MaxT_est,Macros,850mb_Macro
> s,700mb_Macros,500mb_Macros,250mb_Macros
>VectorChapter  : general
>VCLabels       : General
>XSScalarChapter        : general,macros
>XSSCLabels     : General,Macros
>XSVectorChapter        : general
>XSVCLabels     : General
>THScalarChapter        : general,macros
>THSCLabels     : General,Macros
>THVectorChapter        : general
>THVCLabels     : General
>VPScalarChapter        : general,macros
>VPSCLabels     : General,Macros
>VPVectorChapter        : general
>VPVCLabels     : General
>#
>#-------------------------------------------------------------
># Model dialog line parameters.
>#
>linetypekeys   : "1,2,3,4,5,6,7,8,9,10"
>linetype       : "Solid,Short dashed,Medium dashed,Long & short dash,Long dash
> ,Long dash 3 short,Long dash dot,Long dash 3 dots,Medium dash dot,Dotted"
>labelfreqkeys  : "0,1,2,3,4,5"
>labelfreq      : "No labels,Every line,Every 2nd line,Every 3rd line,Every 4th
>  line,Every 5th line"
>#
>#-------------------------------------------------------------
># Model dialog vector symbols. These symbols will appear as options
># when the "More" button is pressed for model dialogs.
>#
>vectorkeys     : "bm,bk,am,ak,an,st"
>vectorsymbols  : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow (oth
> er),Streamlines"
>VertVectorkeys : "bm,bk,am,ak,an"
>VertVectorsymbols : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow (
> other)"
>#
>#-------------------------------------------------------------
># Cross section vertical axis scale. Do not add additional axes.
>#
>yaxiskeys      : "log,lin"
>yaxislabels    : "Logarithmic,Linear"
>#
>#-------------------------------------------------------------
># Vertical profile vertical axis scale. Do not add additional axes.
>#
>vpyaxiskeys    : "log,lin,skewt,stuve"
>vpyaxislabels  : "Logarithmic,Linear,Skew-T,Stuve"
>#
>#-------------------------------------------------------------
># Time/height time axis scale. Do not change.
>#
>thtaxiskeys    : "R,F"
>thtaxislabels  : "Increasing to left,Increasing to right"
>#
>#-------------------------------------------------------------
># Wind Profiler keys.
>#
>wpbottom       : 0
>wptop          : 10000
>wpincrement    : 1000
>wpduration     : 24
>wptimeint      : 60
>wpendtime      : 
>#
>#-------------------------------------------------------------
># End of dynamically generated menus.
>#
>
>#--------------------------------------------------------------
># Additional configurataions:
>#
>#--------------------------------------------------------------
>#
># Thermodynamic diagram settings.
>#
># stndex - defines a list of stability indices and thermodynamic
>#          parameters which are displayed on a thermodynamic diagram
>#          (Skew-T or Stuve). See the GEMPAK variable STNDEX for a list
>#          of valid  parameters and syntax.  Valid for upper air data
>#          vertical profiles only.
>#
># SkewtXAxis, StuveXAxis
>#        - defines the GEMPAK "xaxis" parameter used when plotting
>#          SkewT-logP and Stuve diagrams, respectively.  See the
>#          GEMPAK variable XAXIS for syntax.  Valid for upper air
>#          data and model data vertical profiles.
>#
>stndex         : selv;lift;kinx;totl;swet;lclp;lfcv;eqlv;cape;cins;brch
>SkewtXAxis     : ///;1
>StuveXAxis     : -100/30/20/1
>
>#
># Widget defaults
>#
># Choose default values for the model, vertical coordinate, levels,
># function, default fdf chapters, cross-section line, time-height
># station, vertical profile axis types, radar ring station, upper
># air levels and upper air filter.
>#
>model           : eta211
>vcoord          : pres
>level1          : 500
>level2          : 1000
>fdf             : "Temp_C"
>fdf_directory  : general
>xsfdf          : "Theta_K"
>xsfdf_directory        : general
>thfdf          : "Theta_K"
>thfdf_directory        : general
>vpfdf          : "Temp_C"
>vpfdf_directory        : general
>cross-section   : vbg>dnr
>time-height_stn : DNR
>yaxistype      : log
>vpyaxistype    : skewt
>rring_stid     : FTG
>upalevels      : Surface,1000,925,850,700,500,400,300,250,200,150,100,70,50,30
> ,20,10,Top
>upa_filter     : 0.5
>
>#
># Auto Update. 
>#
># Set to yes or no. The units of update_timer is minutes.
># Valid entries are 1 to 60.
>#
>autoupdate     : no
>update_timer   : 5
>
>#
># List of times in date/time scrolled lists for model data. 
>#
># Generally, this is "all" to present all model times.  An alternative
># is "analysis" to show only model analysis times.
>#
>TimesInList    : all
>
>#
># Time match type. 
># 
># Valid values are "strict" (meaning that a time interval will is applied
># to the time match), "closest" (to match the closest time),  and "none" 
># (for no time matching). Time matching applies only to plan view  data.
>#
>TimeMatch      : none
>
>#
># Time match intervals for "strict" time matching.
>#
># Intervals in seconds. If the data to be time matched lies within the 
># time interval given below, a valid time match will be found.
>#
>SfcObsTimeInterval:    3600
>UpaObsTimeInterval:    43200
>RadarTimeInterval:     900
>SatelliteTimeInterval: 3600
>
>#
># Hypertext browser command and Starting URLs (or files).
>#
># If the Browser command is "netscape %s", and Netscape is already running,
># then GARP will try to open the URL in a new Netscape window. Otherwise,
># GARP will launch the browser command listed. (The %s is the URL placeholder.
> )
># 
>GarpHTML        : $(GARPHOME)/html
>Browser                : "netscape -install %s"
>UserGuide      : $(GarpHTML)/UserGuide.html
>CaseStudies: http://www.comet.ucar.edu/resources/cases/
>
>#
># Dwell settings for animations
>#
># You can customize the dwell settings for animations. The default
># dwell is used when you start GARP, and there are 5 pre-defined
># dwell groups available. Dwell settings are composed of three values;
># the first frame, intermediate and final frame pause. Values are in
># seconds. The speeds should get faster as you go from preset
># dwell 1 to 5. Also, you may change the min and max allowed
># values for the dwell settings on the slider bars. The internal
># defaults are 0 and 3 seconds.
>#
>defaultdwell : "0.60,0.10,0.60"
>presetdwell1 : "2.50,1.50,2.00"
>presetdwell2 : "1.20,0.66,0.90"
>presetdwell3 : "0.90,0.33,0.60"
>presetdwell4 : "0.60,0.10,0.50"
>presetdwell5 : "0.20,0.05,0.20"
>dwellmin     : "0.01"
>dwellmax     : "3.00"
>
>#
># Status bar and units
>#
># This is the information that will be displayed on the status bar
># by default. Allowable items are:
>#
>#      clock           ticking clock
>#      windowcoords    X,Y coordinate of mouse pointer
>#      plotcoords      mouse pointer position in plotting coordinates
>#      pixelvalue      image pixel value
>#      distcalc        distance and range calculator
>#
>statusbaritems : "clock,windowcoords,plotcoords,pixelvalue,distcalc"
>
>#
># Define the units for image brightness temperature and distances.
># Internal defaults are "degrees C" for temperature and "km" for 
># distance. Allowable values are:
>#
># temperature: C, K or F  (Celcius, Kelvin, Fahrenheit)
># distance:    KM, MI, or NM (Kilometers, Miles, Nautical miles)
>#
>tempunits :    C
>distunits :    KM
>
>#
># Lat/Lon Grid defaults.
>#
># Define default lat/lon lines, increment, labelling, color, line
># type and line width.  (See "latlon" in Chapter 3 of the NAWIPS
># Users Guide for help.)
>#
>latlon:                no      # lat/lon grid, yes or no 
>latinc:                5.0     # latitude increment (degrees)
>loninc:                5.0     # longitude increment (degrees)
>label_freq:    2       # label frequency
>gridlinecolor: 2       # line color (GEMPAK color number)
>gridlinetype:  10      # line type (GEMPAK line types)
>gridlinewidth: 1       # line width
>
>#
>#-----------------------------------------------------------------------
># Static configurations
>#
># You should not have to change anything else in this file, unless
># you have a very good reason.
>
>#
># Minimum size of zoom box (in pixels) before zooming occcurs.
># To prevent zooming by mistake.  Leave as is.
>#
># Zoom box color. GEMPAK color number used when drawing the zoom box. 
># The zoom box will NOT necessarliy appear in this color, especially
># over images, since the color actually drawn is a combination of color
># indices. Leave alone unless the zoom box does not appear (is black)
># on some plots. (Color 1 is off-white)
>#
>minzoomboxsize  : 20
>zoomboxcolor   : 1
>
>#
># GARP icon directory (do not change)
>#
>ICONDIR         : $(GARPHOME)/icons
>
>#
>#  Tables used for overlaying the location of certain station types
>#  i.e. surface, sounding, profiler, NEXRAD sites, etc.
>#  (Do not change)
>#
>tabledir        : $(GARPHOME)/tables
>
># 
>#  Color enhancement tables
>#  Found in tabledir
>#  (Do not change)
>#
>mastertbl       : master_garp.tbl
>satenhancetbl   : sat_enhance.tbl
>radenhancetbl   : rad_enhance.tbl
>
>#
>#  Map list table file (don't change)
>#
>maplisttbl     : maplist.tbl
>
>#  Location of FDF (Field Description File) files
>#  (Do not change, unless you have a different FDF directory)
>#
>fdfdir          : $(GARPHOME)/fdf              # FDF Directory
>valid_fdf_keys  : $(fdfdir)/valid_fdf_keys     # Valid keys file
>scalarfdf       : $(fdfdir)/scalar/            # Plan view scalar FDFs
>vectorfdf       : $(fdfdir)/vector/            # Plan view vector FDFs
>xsscalarfdf     : $(fdfdir)/xsscalar/          # Cross section scalar FDFs
>xsvectorfdf     : $(fdfdir)/xsvector/          # Cross section vector FDFs
>thscalarfdf    : $(fdfdir)/xtscalar/          # Time/height scalar FDFs
>thvectorfdf    : $(fdfdir)/xtvector/          # Time/height vector FDFs
>vpscalarfdf    : $(fdfdir)/vpscalar/          # Vertical profile scalar FDFs
>vpvectorfdf    : $(fdfdir)/vpvector/          # Vertical profile vector FDFs
>
>#  File name template strings.
>#
>#  Each component of the template strings must match up one for one
>#  with the data directories defined above
>#
>#  Don't worry about matching up the "model" or "type" strings
>#
>#  Unless you've changed the Data Directory structures above,
>#  you shouldn't have to change these lines.
># Use the following for YYMMDD convention
>#nidsT  : $(nids)/%(site)/%(product)/*_@(YYMMDD)_@(HHNN)
>#nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
>#gridsT    : $(grids)/@(YYMMDDHH)_*.gem
>#surfaceT  : $(surface)/@(YYMMDD)_sao.gem
>#upperairT : $(upperair)/@(YYMMDD)_upa.gem
>#profilerT : $(profiler)/@(YYMMDDHH)_6min.gem
>#satT   : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
>#
>nidsT  : $(nids)/%(site)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>satT   : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
>gridsT    : $(grids)/@(YYYYMMDDHH)_*.gem
>surfaceT  : $(surface)/@(YYYYMMDD)_sao.gem
>upperairT : $(upperair)/@(YYYYMMDD)_upa.gem
>profilerT : $(upperair)/@(YYYYMMDDHH)_6min.gem
>
>#------------------------------------------------------------------------
>
>
>Thanks.
>
>Pat
>
>



pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy