[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Fwd: DIFAX]
- Subject: Re: [Fwd: DIFAX]
- Date: Mon, 26 Mar 2001 14:27:53 -0700 (MST)
On Mon, 26 Mar 2001, Jeff Weber wrote:
> Hi Neil,
>
> The best way to check would be with a:
> notifyme -vl - -h pluto.met.fsu.edu
>
> If you get any info you know you are allowed for access.
>
> There is no way to determine what you are allowed for other than asking
> the admin, or viewing their logs or ldmd.conf file
>
> I would do a notifyme -vl - -h pluto.met.fsu.edu | & grep DIFAX
>
> This way we can determine if pluto is noe getting the DIFAX feed, and if
> so just need the proper allow commands for you to get the feed.
>
> You can change the feedtype to view the timeliness of the different feeds,
> or just do not pipe it anywhere and standard out will display all prods
> that they are recieving...
>
> Hope this helps, and you still have a DIFAX feed from
> thelma.unidata.ucar.edu
>
> if no luck.
>
>
> Let me know,
>
>
> -Jeff
> ____________________________ _____________________
> Jeff Weber address@hidden
> Unidata Support PH:303-497-8676
> NWS-COMET Case Study Library FX:303-497-8690
> University Corp for Atmospheric Research 3300 Mitchell Ln
> http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
> ________________________________________ ______________________
>
> On Mon, 26 Mar 2001, Neil R. Smith wrote:
>
> > Jeff,
> > Bill responded so I'll troubleshoot that route. BTW, what ldm command
> > can I use to send from our ldm to pluto to find out if they
> > a) have a feedtype
> > b) have given me 'allow' to get the feedtype
> > I want to confirm such minimal info from my end for the primary
> > and, now, for our failover site (I'll now have to go thru this
> > whole thing with them too [aqua.nsstc.uah.edu]).
> > Thanks, -Neil
> > --
> > Neil R. Smith, Comp. Sys. Mngr. address@hidden
> > Dept. Atmospheric Sci., Texas A&M Univ. 979/845-6272 FAX:979/862-4466
>
>