Re: 20040719: Howard LDM Feed

Hi Jason,

IP #'s work just fine...no worries.

Jeff
---------------------------------------------------------------------
Jeff Weber                                    address@hidden        :
Unidata Program Center                        PH:303-497-8676        :
University Corp for Atmospheric Research      3300 Mitchell Ln       :
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000  :
---------------------------------------------------------------------

On Tue, 20 Jul 2004, Jason T. Smith wrote:

> Hi,
>    I was talking with Dr. Joseph and he said that zephyr is not in use. He
> also said that due to DNS problems, the FQDN may or may not work.  If it
> doesn't work can we use the ip address of it?
>
> Jason
>
> Quoting Jeff Weber <address@hidden>:
>
> > HI Jason,
> >
> > I suspect the name change from:
> >
> > drizzle.sytes.net
> >
> > to
> >
> > drizzle.hupas.howard.edu
> >
> > is the issue :)
> >
> >
> > No need to save any settings, proceed with the source install [6.0.14],
> > and please let us know if you have any questions or if we can help in any
> > way.
> >
> > Cheers,
> >
> > Jeff
> > ---------------------------------------------------------------------
> > Jeff Weber                                    address@hidden        :
> > Unidata Program Center                        PH:303-497-8676        :
> > University Corp for Atmospheric Research      3300 Mitchell Ln       :
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000  :
> > ---------------------------------------------------------------------
> >
> > On Tue, 20 Jul 2004, Jason T. Smith wrote:
> >
> > > Hello,
> > >   When I started it was given to me on the machine
> > drizzle.hupas.howard.edu. I
> > > dont know about zephyr.  The machine drizzle.sytes.net might be an alias
> > for
> > > drizzle.hupas.howard.edu. I can check into that. I will be working on
> > upgrading
> > > the installation in the next few days, but are there any special settings
> > that
> > > I need to preserve?  Thanks.
> > >
> > > Jason Smith
> > >
> > >
> > > Quoting Jeff Weber <address@hidden>:
> > >
> > > > Hi Jason,
> > > >
> > > >
> > > >
> > > > allow ANY-NLDN-WSI zephyr\.124\.238\.138\.in-addr\.arpa # Howard
> > University
> > > > allow ANY-NLDN-WSI drizzle.sytes.net             # Howard University
> > > > (second machine)
> > > >
> > > >
> > > > You are allowed from "atm.geo.nsf.gov"...
> > > >
> > > > Have you give up on the machine "zephyr"?
> > > >
> > > >
> > > > Please upgrade to LDM 6.0.14, I do not think this is the problem, but it
> > > > may be, and it is best to have the latest tested version, we know of
> > bugs
> > > > in 6.0.10.
> > > >
> > > >
> > > > Let me know how things go after upgrading and we will trouble shoot from
> > > > there.
> > > >
> > > > To upgrade please visit:
> > > >
> > > > http://gforge.unidata.ucar.edu/projects/ldm/home/index.html
> > > >
> > > > and obtain the source distribution.
> > > >
> > > > Cheers,
> > > >
> > > > Jeff
> > > > ---------------------------------------------------------------------
> > > > Jeff Weber                                    address@hidden        :
> > > > Unidata Program Center                        PH:303-497-8676        :
> > > > University Corp for Atmospheric Research      3300 Mitchell Ln       :
> > > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000  :
> > > > ---------------------------------------------------------------------
> > > >
> > > > On Mon, 19 Jul 2004, Unidata Support wrote:
> > > >
> > > > >
> > > > > ------- Forwarded Message
> > > > >
> > > > > >To: address@hidden
> > > > > >cc: address@hidden
> > > > > >From: "Jason T. Smith" <address@hidden>
> > > > > >Subject: Howard LDM feed
> > > > > >Organization: UCAR/Unidata
> > > > > >Keywords: 200407191752.i6JHqGaW002033
> > > > >
> > > > > Hello,
> > > > >    I am Jason Smith and I am working with Dr. Joseph at Howard
> > Univerisity
> > > > to
> > > > > setup the LDM on a machine locally.  Below is the startup log of when
> > i
> > > > ran
> > > > > ldmadmin start.  Im not sure where its not connecting from should be
> > > > > interesting since i think it might be something dealing with the
> > > > connection
> > > > > between drizzle(the local ldm host) and where it is tring to connect.
> > Any
> > > > ideas
> > > > > what is causing this and how to fix it. I got in contact with Kevin
> > > > Thomas,
> > > > > about this, his response is below. Thank you in advance.
> > > > >
> > > > > Jason Smith
> > > > >
> > > > >
> > > > >
> > > > > Jul 11 16:29:42 drizzle rpc.ldmd[29168]: Starting Up (version: 6.0.10;
> > > > built:
> > > > > May  3 2003 23:33:39)
> > > > > Jul 11 16:29:42 drizzle pqbinstats[29170]: Starting Up (29168)
> > > > > Jul 11 16:29:42 drizzle pqact[29171]: Starting Up
> > > > > Jul 11 16:29:42 drizzle rtstats[29172]: Starting Up (29168)
> > > > > Jul 11 16:29:42 drizzle atm[29173]: Starting Up(6.0.10):
> > > > atm.geo.nsf.gov:
> > > > > TS_ZERO TS_ENDT {{NNEXRAD,  "/p...(AMX|ABR|LWX|DOX|AKQ)"}}
> > > > > Jul 11 16:29:42 drizzle atm[29173]: Desired product class:
> > > > 20040711152942.965
> > > > > TS_ENDT {{NNEXRAD,  "/p...(AMX|ABR|LWX|DOX|AKQ)"}}
> > > > > Jul 11 16:29:42 drizzle atm[29173]: acl.c:703: nullproc_6() failure:
> > RPC:
> > > > > Unable to receive; errno = Connection reset by peer
> > > > > Jul 11 16:29:43 drizzle atm[29173]: acl.c:703: nullproc_5() failure:
> > RPC:
> > > > > Unable to receive; errno = Connection reset by peer
> > > > > Jul 11 16:30:13 drizzle atm[29173]: Desired product class:
> > > > 20040711152942.965
> > > > > TS_ENDT {{NNEXRAD,  "/p...(AMX|ABR|LWX|DOX|AKQ)"}}
> > > > >
> > > > > Hi Jason...
> > > > >
> > > > > Based on the output in my log files, I *think* the message means that
> > > > > "atm.geo.nsf.gov" isn't configured to give you access to the data.
> > Have
> > > > you
> > > > > requested access?  Unidata people, address@hidden, can help
> > you
> > > > here.
> > > > >
> > > > > Before contacting Unidata, I'd recommend upgrading your LDM software.
> > The
> > > > > current version is 6.0.14.  The documentation that I have says that it
> > > > fixes
> > > > > several performance problems, including connection issues.  It
> > probably
> > > > won't
> > > > > fix your problem, however, it wouldn't hurt to make sure you are using
> > the
> > > > > software that everyone is using first before trying to get help from
> > > > Unidata.
> > > > >
> > > > > Good Luck.
> > > > >
> > > > > Kevin W. Thomas
> > > > > Center for Analysis and Prediction of Storms
> > > > > University of Oklahoma
> > > > > Norman, Oklahoma
> > > > >
> > > > >
> > > > >
> > > > > -------------------------------------------------
> > > > > This mail sent through IMP: http://horde.org/imp/
> > > > >
> > > > > --
> > > > >
> > > >
> > ****************************************************************************
> > > > > Unidata User Support                                    UCAR Unidata
> > > > > (303)497-8643                                                  P.O.
> > Box
> > > > > address@hidden                                   Boulder, CO
> > > > >
> > > >
> > ----------------------------------------------------------------------------
> > > > > Unidata WWW Service
> > http://my.unidata.ucar.edu/content/support
> > > > >
> > > >
> > ----------------------------------------------------------------------------
> > > > > NOTE: All email exchanges with Unidata User Support are recorded in
> > the
> > > > > Unidata inquiry tracking system and then made publically available
> > > > > through the web.  If you do not want to have your interactions made
> > > > > available in this way, you must let us know in each email you send to
> > us.
> > > > >
> > > > > ------- End of Forwarded Message
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > > -------------------------------------------------
> > > This mail sent through IMP: http://horde.org/imp/
> > >
> >
>
>
>
>
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
>