The Deepwater Horizon oil spill began on April 20, 2010, with a blowout of BP’s Macondo drilling platform in the Gulf of Mexico. In addition to the death of 11 men, the spill resulted in the largest mobilization of resources addressing an environmental emergency in the history of the United States. The size of the spill required the Emergency Response Division to refine tracking subsurface oil, flowrate calculations, and long-term oil transport modeling. Data and information management became a paramount issue ...

Eight years ago today, on April 20, 2010, an explosion on the Deepwater Horizon Macondo oil well drilling platform tragically killed 11 workers, and started the largest marine oil spill in U.S. history, releasing millions of barrels of oil into the Gulf of Mexico.

This blog covers information that will be presented by NOAA Office of Response and Restoration Senior Scientist Lisa DiPinto at the AAAS Conference this week. To check out other presentation topics, visit the AAAS Conference website.

The environmental toll from the 2010 Deepwater Horizon oil spill disaster was enormous, demanding a massive deployment of people and materials to measure the adverse effects.

Federal and state agencies worked quickly to scale up the emergency response, clean up the spill, mount a large-scale effort to assess the injuries to wildlife and other natural resources, and record how these lost resources adversely affected the public.

The 2010 Deepwater oil disaster in the Gulf of Mexico revealed a challenge with the way scientific monitoring information is shared and stored.

At the time, the scientific records of monitoring efforts in the Gulf of Mexico were dispersed across many entities from universities, natural resource management agencies, private industries to non-governmental organizations. In most cases monitoring systems were developed independently, often narrowed to specific questions, such as how many oysters should be harvested and how many should be left in the water?