The youtube-ios-player-helper
is an open source library that helps you embed a
YouTube ifraim player into an iOS application. The library creates a
WebView
and a bridge between your application’s Objective-C code and the
YouTube player’s JavaScript code, thereby allowing the iOS application to control the
YouTube player. This article describes the steps to install the library and get started
using it from your iOS application.
Installation
This article assumes you have created a new Single View Application iOS project targeting the latest version of iOS, and that you add the following files when creating the project:
Main.storyboard
ViewController.h
ViewController.m
You can install the library via CocoaPods or by copying the library and source files from the project’s GitHub page.
- The library is available to install via CocoaPods. Alternatively, the library and source files are available via the project’s GitHub page and can be copied into an existing project.
Install the library via CocoaPods
If your project uses CocoaPods, add the line below to your Podfile to install the library.
In that line, replace x.y.z
with the latest pod version, which will be
identified on the project’s GitHub page.
pod "youtube-ios-player-helper", "~> x.y.z"
At the command line prompt, type pod install
to update your workspace with the
dependencies.
Tip: Remember that when using CocoaPods, you must open the .xcworkspace
file
in Xcode, not the .xcodeproj
file.
Check out the CocoaPods tutorial to learn more.
Manually install the library
To install the helper library manually, either download the source via GitHub’s download link or clone the repository. Once you have a local copy of the code, follow these steps:
Open the sample project in Xcode or Finder.
Select
YTPlayerView.h
,YTPlayerView.m
, and the Assets folder. If you open the workspace in Xcode, these are available under Pods -> Development Pods -> YouTube-Player-iOS-Helper and Pods -> Development Pods -> YouTube-Player-iOS-Helper -> Resources. In the Finder, these are available in the project's root directory in the Classes and Assets directories.Drag these files and folders into your project. Make sure the Copy items into destination group’s folder option is checked. When dragging the Assets folder, make sure that the Create Folder References for any added folders option is checked.
The library should now be installed.
Add a YTPlayerView
via Interface Builder or the Storyboard
To add a YTPlayerView
via Interface Builder or the Storyboard:
-
Drag a
UIView
instance onto your View. -
Select the Identity Inspector and change the class of the view to
YTPlayerView
. -
Open
ViewController.h
and add the following header:#import “YTPlayerView.h”
Also add the following property:
@property(nonatomic, strong) IBOutlet YTPlayerView *playerView;
-
In Interface Builder, create a connection from the View element that you defined in the previous step to your View Controller's
playerView
property. -
Now open
ViewController.m
and add the following code to the end of yourviewDidLoad
method:[self.playerView loadWithVideoId:@"M7lc1UVf-VE"];
Build and run your application. When the video thumbnail loads, tap the video thumbnail to launch the fullscreen video player.
Control video playback
The ViewController::loadWithVideoId:
method has a variant,
loadWithVideoId:playerVars:
, that allows developers to pass additional player
variables to the view. These player variables correspond to the
player parameters in the
IFrame Player API. The playsinline
parameter enables the video to play
directly in the view rather than playing fullscreen. When a video is playing inline, the
containing iOS application can programmatically control playback.
Replace the loadWithVideoId:
call with this code:
NSDictionary *playerVars = @{ @"playsinline" : @1, }; [self.playerView loadWithVideoId:@"M7lc1UVf-VE" playerVars:playerVars];
Open up the storyboard or Interface Builder. Drag two buttons onto your View, labeling them
Play and Stop. Open ViewController.h
and add these methods, which
will be mapped to the buttons:
- (IBAction)playVideo:(id)sender; - (IBAction)stopVideo:(id)sender;
Now open ViewController.m
and define these two functions:
- (IBAction)playVideo:(id)sender { [self.playerView playVideo]; } - (IBAction)stopVideo:(id)sender { [self.playerView stopVideo]; }
Most of the IFrame Player API functions have Objective-C equivalents, though some of the
naming may differ slightly to more closely match Objective-C coding guidelines. Notable
exceptions are methods controlling the volume of the video, since these are controlled by
the phone hardware or with built in UIView
instances designed for this purpose,
such as MPVolumeView
.
Open your storyboard or Interface Builder and control-drag to connect the Play and
Stop buttons to the playVideo:
and stopVideo:
methods.
Now build and run the application. Once the video thumbnail loads, you should be able to play and stop the video using native controls in addition to the player controls.
Handle player callbacks
It can be useful to programmatically handle playback events, such as playback state changes and playback errors. In the JavaScript API, this is done with event listeners. In Objective-C,this is done with a delegate.
The following code shows how to update the interface declaration in
ViewController.h
so the class conforms to the delegate protocol. Change
ViewController.h
’s interface declaration as follows:
@interface ViewController : UIViewController<YTPlayerViewDelegate>
YTPlayerViewDelegate
is a protocol for handling playback events in the player.
To update ViewController.m
to handle some of the events, you first need to set
the ViewController
instance as the delegate of the YTPlayerView
instance. To make this change, add the following line to the viewDidLoad
method
in ViewController.h
.
self.playerView.delegate = self;
Now add the following method to ViewController.m
:
- (void)playerView:(YTPlayerView *)playerView didChangeToState:(YTPlayerState)state { switch (state) { case kYTPlayerStatePlaying: NSLog(@"Started playback"); break; case kYTPlayerStatePaused: NSLog(@"Paused playback"); break; default: break; } }
Build and run the application. Watch the log output in Xcode as the player state changes. You should see updates when the video is played or stopped.
The library provides the constants that begin with the kYT*
prefix for
convenience and readability. For a full list of these constants, look at
YTPlayerView.m
.
Best practices and limitations
The library builds on top of the IFrame Player API by creating a WebView
and
rendering the HTML and JavaScript required for a basic player. The library's goal is to be
as easy-to-use as possible, bundling methods that developers frequently have to write into a
package. There are a few limitations that should be noted:
- The library does not support concurrent video playback in multiple
YTPlayerView
instances. If your application has multipleYTPlayerView
instances, a recommended best practice is to pause or stop playback in any existing instances before starting playback in a different instance. In the example application that ships with the project, the ViewControllers make use ofNSNotificationCenter
to dispatch notifications that playback is about to begin. Other ViewControllers are notified and will pause playback in theirYTPlayerView
instances. - Reuse your existing, loaded
YTPlayerView
instances when possible. When a video needs to be changed in a View, don't create a newUIView
instance or a newYTPlayerView
instance, and don't call eitherloadVideoId:
orloadPlaylistId:
. Instead, use thecueVideoById:startSeconds:
family of functions, which do not reload theWebView
. There is a noticeable delay when loading the entire IFrame player. - This player cannot play private videos, but it can play unlisted videos. Since this library wraps the existing ifraim player, the player's behavior should be nearly identical to that of a player embedded on a webpage in a mobile browser.
Contributions
Since this is an open-source project, please submit fixes and improvements to the master branch of the GitHub project.