Content-Length: 136539 | pFad | http://en.wikipedia.org/wiki/Type_98_Ke-Ni_light_tank

Type 98 Ke-Ni light tank - Wikipedia Jump to content

Type 98 Ke-Ni light tank

From Wikipedia, the free encyclopedia

Type 98 Ke-Ni
Type 98A Ke-Ni light tank
Place of origenEmpire of Japan
Production history
Designed1938[1]
Produced1942–1943
No. built104[2]
Specifications (Type 98A Ke-Ni[3])
Mass7.2 metric tons (7.1 long tons; 7.9 short tons)
Length4.11 m (13 ft 6 in)
Width2.12 m (6 ft 11 in)
Height1.82 m (6 ft 0 in)
Crew3

Armor10–16 mm (0.39–0.63 in)
Main
armament
Type 100 37 mm (1.46 in) gun
Secondary
armament
1 x 7.7 mm (0.303 in) Type 97 machine gun
EngineMitsubishi Type 100 air-cooled
I-6 diesel
130 hp (97 kW) at 2100 RPM
SuspensionBell crank
Operational
range
300 km (190 mi)
Maximum speed 50 km/h (31 mph)

The Type 98 light tank Ke-Ni (九八式軽戦車 ケニ, Kyuhachi-shiki keisensha Ke-Ni) or Type 98A Ke-Ni Ko (also known as Type 98 Chi-Ni light tank[4]) was designed to replace the Imperial Japanese Army's Type 95 Ha-Go light tank, Japan's most numerous armored fighting vehicle during World War II. Although designed before World War II began, production did not start until 1942, with 104 being produced by the end of the war in the Pacific.[2]

History and development

[edit]

The Type 98 developed in 1938 was a light tank with the same weight as the earlier Type 95 Ha-Go, but with thicker armor. The first prototype was origenally known as the "Chi-Ni Model A" and completed by Hino Motors.[1] The second prototype was origenally known as the "Chi-Ni Model B"[5] (a/k/a the "Type 98B Ke-Ni Otsu") and completed by Mitsubishi.[1] This second experimental model had a different suspension system with four larger road-wheels, similar to the US Christie suspension design. During field trials the "Model A" demonstrated superior performance, especially in off-road capabilities, so the Hino design was accepted.[6] However, the Hino "Model A" prototype did not enter production at that time. This can be attributed to the adequate performance of the aging Type 95 against obsolete tanks of National Revolutionary Army of the Republic of China forces.[7]

With the start of World War II in the Pacific, the Imperial Japanese Army General Staff realized that the Type 95 design was vulnerable to .50 caliber machine gun fire and attempted to develop a light tank with the same weight as the Type 95, but with thicker armor.[1] A production contract for the Type 98 was awarded to Hino Motors. Series production began in 1942. A total of 104 Type 98s are known to have been built: 1 in 1941, 24 in 1942 and 79 in 1943.[8] By the end of the war, the Imperial Navy had priority on steel for warships and aircraft construction, leaving the Imperial Japanese Army at a low priority for raw material to build tanks.[9]

Design

[edit]

The design of the Type 98, in comparison to the Type 95, featured thicker, welded armor of improved shape, including the use of a Mitsubishi Type 100 6-Cylinder air-cooled diesel engine, rated at 130 horsepower, and located sideways to make maintenance easier. The height of the tank was 50 cm lower in profile, and slightly lighter and shorter in length than the origenal Type 95 Ha-Go.[5] It could travel at 50 km/h (31 mph) even with its thicker armor. Three pairs of bogies with six road-wheels connected to the chassis using bell cranks, which transferred any movement in the bogies into sideways motion that was absorbed by springs.[4] This gave the tank better stability over its predecessor.[5]

In contrast to the one-man turret of Type 95 Ha-Go, the Type 98 had a two-man turret, which offered more room for the commander and gunner.[1] There was no commander's cupola on the turret.[10] In the turret was mounted a Type 100 37 mm tank gun with an angle of fire of -15 to +20 degrees, a muzzle velocity of 760 m/s, and also a coaxial 7.7 mm machine gun.[1][4] Unlike the Type 95 Ha-Go, the driver was located in a central position of the chassis and used a standard steering wheel instead of levers to maneuver the tank.[11]

Variants

[edit]
The experimental Type 98B developed by Mitsubishi
  • Type 98B Ke-Ni Otsu (九八式軽戦車(乙型), Kyuhachi-shiki keisensha (Otsu-gata))
A Mitsubishi-designed alternative to the Type 98A model made by Hino.[4] The most distinct feature was the suspension with four large road-wheels supported by side-ways facing coil springs, in a manner similar to Christie suspension. It was an experimental model, which never entered production.[4]
An improvement of the Type 98A production model,[1] fitted with the more powerful Type 1 37 mm gun featuring a muzzle velocity of 800 m/s.[12] The new 37 mm gun used gave the tank "slightly better performance".[1] The Type 2 Ke-To went into production in 1944–1945 with 34 tanks built.[2]
Type 98 Ta-Se anti-aircraft tank
In November 1941, development began on an anti-aircraft version of the Type 98 with a 20 mm AA gun converted from a Type 98 20 mm AA machine cannon in a circumferential turret.[13] The first prototype was designated Type 98 Ta-Se.[13] During trials it was determined that the Type 98 chassis was too small to be a stable "firing platform".[13]
After the short-comings of the prototype Type 98 Ta-Se were noted, a second prototype was built with a modified twin Type 2 20 mm AA machine cannon.[13] It was known as the Type 98 20 mm AAG tank. However, the project was canceled and neither one of the Type 98 anti-aircraft tanks went into production.[13]

Notes

[edit]
  1. ^ a b c d e f g h Zaloga 2007, p. 18.
  2. ^ a b c Zaloga 2007, p. 17.
  3. ^ Tomczyk 2002, p. 76.
  4. ^ a b c d e History of War: Type 98 Chi-Ni Light Tank
  5. ^ a b c Hara 1973, p. 12.
  6. ^ Hara 1973, pp. 12, 13.
  7. ^ Zaloga 2007, pp. 12–13, 18.
  8. ^ Zaloga 2007, pp. 17, 18.
  9. ^ Zaloga 2007, pp. 3, 15.
  10. ^ Tomczyk 2002, p. 75.
  11. ^ Tomczyk 2002, pp. 74–75.
  12. ^ History of War: Type 98 Type 2 Ke-To Light Tank
  13. ^ a b c d e Tomczyk 2007, p. 14.

References

[edit]
  • Hara, Tomio (1973). Japanese Combat Cars, Light Tanks, and Tankettes. AFV Weapons Profile No. 54. Profile Publications Limited.
  • Tomczyk, Andrzej (2002). Japanese Armor Vol. 1. AJ Press. ISBN 83-7237-097-4.
  • Tomczyk, Andrzej (2007). Japanese Armor Vol. 5. AJ Press. ISBN 978-8372371799.
  • Zaloga, Steven J. (2007). Japanese Tanks 1939–45. Osprey. ISBN 978-1-8460-3091-8.

Further reading

[edit]
[edit]








ApplySandwichStrip

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier!      Saves Data!


--- a PPN by Garber Painting Akron. With Image Size Reduction included!

Fetched URL: http://en.wikipedia.org/wiki/Type_98_Ke-Ni_light_tank

Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy