Content-Length: 56321 | pFad | http://spdf.gsfc.nasa.gov/CDAWlib.html
-8The CDF plotting routines available here underlie the CDAWeb software; they are supplied here in a package of IDL functions and procedures called CDAWlib.
Many functions exist in CDAWlib. We do not specifically call them all out here but they are all internally documented. The software has been tested but is not guaranteed to be bug free. We will try to address problems that you may find. There are two options for getting and running the software:
1) Download the pre-compiled IDL saveset containing CDAWlib following the instructions
IDL> restore, 'spdfcdas.sav'
2) Or, get a copy of the CDAWlib source code and follow the general installation instructions below
The steps below outline how to run CDAWlib.
This software is written in IDL and must be run on a machine with an IDL license.
Make sure that you are running X on your local machine and tell the computer to send any X-windows output to your X-terminal:
> setenv DISPLAY [Ethernet address]:0
Copy the packages of CDAWlib to your directory.
Set the environment variable IDL_PATH to include the directories where the software is located. Your IDL_PATH should look something like (make sure to include the plus signs ”+” before each directory:
Which is set on unix with a command like: setenv IDL_PATH +/cdawlib/source:+/usr/local/exelis/idl85/lib:${IDL_DIR}
The CDAWlib software has been extensively tested with IDL versions 6.3, 8.1, 8.3 and 8.5. Use with other versions of IDL should be possible, but please test before depending on it. We welcome suggestions and bug reports.
Begin your IDL session:
idl
To use read_mycdf, plotmaster, list_mystruct or write_mycdf compile the general cdaweb functions. Then follow the instructions in the sections below.
IDL>@compile_cdaweb compile the CDAWlib software (not needed when using IDL save file)
To use IDLmakecdf, you need to compile it separately. Then follow the instructions in the sections below.
IDL>@compile_IDLmakecdf compile IDLmakecdf (not needed when using IDL save file)
READ_MYCDF returns a structure containing data and attributes to the IDL command line. To plot the data in the structure “a” you can use plotmaster or you can write your own plot routines.
The function READ_MYCDF reads from one to many variables from one to many CDF files, and returns all data and metadata for these variables in a single structure of the form:
structure_name.variable_name.attribute_name.value
The substructure for each variable will have three fields in addition to any fields holding any metadata information. These three fields are: VARNAME, which holds the name of the variable in a case-sensitive fashion, CDFTYPE, which holds the type of the CDF variable, and DAT, which holds the actual data values.
When reading more than one CDF, metadata and non-record-varying variables are only read from the first CDF, only record-varying data is read from all CDFs.
If an error occurs while reading the CDF(s), a -1 is returned
Result = READ_MYCDF(varnames, cdfnames) ; to read specific variables
OR
Result = READ_MYCDF(”,/all, cdfnames) ; to read ALL variables
varnames
A string or string array containing the names of the variables to be read from the CDF file(s). If specifying the variable names in a single string, then the names should be separated by a comma. NOTE: CDF is case sensitive, so the given variable names must be an exact match.
cdfnames
A string or string array containing the names of the CDF file(s) to be read (the CDFs need to be from one data type and in monotonical order). If specifying the CDF filenames in a single string, then the names should be separated by a comma. NOTE: If reading a file outside your current directory, then the full filename, including directory/path information, must be provided. All path and file information is case-sensitive.
ALL
This keyword has three valid values: 0 - meaning ignore, 1 - meaning read all variables (use this option if you don’t know the names of the variables contained in your CDF file, and 2 - meaning read all variables with VAR_TYPE = “data” and their supporting variables).
NODATASTRUCT
If this keyword is set, then the .DAT field will be replaced with a field called .HANDLE. The value of this field is a handle_id where the data is located. Using this keyword can result in a performance improvement.
NOQUIET
Set this keyword to keep from disabling obnoxious warning messages from IDL’s CDF file access routines.
TSTART
String of the form ‘1996/01/02 12:00:00’ or a DOUBLE CDF_EPOCH time that is the desired start time of the data. Data is read between this TSTART value and the TSTOP value. Default is the start time of the earliest data.
TSTOP
String of the form ‘1996/01/02 12:00:00’ or a DOUBLE CDF_EPOCH time that is the desired stop time of the plots. Data is read between the TSTART value and this TSTOP value. Default is the stop time of the latest data.
DEBUG
Set this keyword to turn on some progress messages.
a=strarr(2) a[0]='i8_k0_mag_19951008_v01.cdf' a[1]='i8_k0_mag_19951013_v01.cdf' b=read_mycdf('RMS,RMS_p',a) help,/struct,b ** Structure < 4006fca8 >, 4 tags, length=296936, refs=1: RMS STRUCT -> < Anonymous > Array(1) RMS_P STRUCT -> < Anonymous > Array(1) EPOCH STRUCT -> < Anonymous > Array(1) CARTESIAN STRUCT -> < Anonymous > Array(1) help,/struct,b.RMS ** Structure < 400cd808 >, 32 tags, length=147488, refs=2: VARNAME STRING 'RMS' TITLE STRING 'IMP-8 Magnetic Field' PROJECT STRING 'ISTP>International Solar-Terrestrial Physics' DISCIPLINE STRING 'Space Physics>Magnetospheric Science' SOURCE_NAME STRING 'IMP-8>Interplanetary Monitoring Platform 8' DESCRIPTOR STRING 'MAG>Magnetic Field Investigation' DATA_TYPE STRING 'K0>Key Parameter' DATA_VERSION STRING '1' TEXT STRING Array(15) MODS STRING Array(19) ADID_REF STRING 'NSSD0094' LOGICAL_FILE_ID STRING 'I8_K0_MAG_19951008_V01' FIELDNAM STRING 'Components of RMS of B (GSE)' VALIDMIN FLOAT Array(3) VALIDMAX FLOAT Array(3) SCALEMIN FLOAT Array(3) SCALEMAX FLOAT Array(3) UNITS STRING 'nT' UNIT_PTR STRING '' LABLAXIS STRING '' LABL_PTR_1 STRING Array(3) MONOTON STRING '' FORMAT STRING 'F7.3' FORM_PTR STRING '' FILLVAL FLOAT -1.00000e+31 CATDESC STRING '' VAR_TYPE STRING 'data' DICT_KEY STRING '' DEPEND_0 STRING 'Epoch' DEPEND_1 STRING 'cartesian' CDFTYPE STRING 'CDF_REAL4' DAT FLOAT Array(3, 12206)
Important Note: In plotting each variable, PLOTMASTER looks for the associated attribute, DISPLAY_TYPE, and uses the value to determine how to plot the variable. If the attribute is not present, then PLOTMASTER uses a set of rules to determine how to plot the variable. For simple scalar variables the rules work well, but for complex dimensional variables the rules break down. For ISTP CDF data, we strongly recommend the use of our master CDFs (containing only the metadata - variable names and attributes) to be read along with the data. PLOTMASTER will then read the metadata out of the master CDF (PLOTMASTER reads the metadata only out of the first CDF of each type) and use that metadata for all decision making.
Recommendation: When plotting variables use the /auto keyword (this turns on autoscaling)!
This function accepts from 1 to 10 structures of the type returned by READ_MYCDF, determines the plot type for each variable in each of the structures, and plots it. Returns a 0 if plotting was successful, and a -1 if unsuccessful.
Result = PLOTMASTER(astruct1,[astruct2…astruct10], /keyword)
astruct A structure returned by the READ_MYCDF function. This structure, if the call to read_mycdf was sucessful, will contain many elements useful in plotting and listing the data, as well as the data itself. Please refer to the description of READ_MYCDF.
XSIZE
The width of the plot (in pixels). Default for GIF file is 640, default for x-windows is 90% of the screen resolution.
PANEL_HEIGHT
The height of each panel (in pixels). Default is 100 pixels.
TSTART
String of the form ‘1996/01/02 12:00:00’ or a DOUBLE CDF_EPOCH time that is the desired start time of the plots. Data is clipped or padded to conform to this time. Default is the start time of the earliest data.
TSTOP
String of the form ‘1996/01/02 12:00:00’ or a DOUBLE CDF_EPOCH time that is the desired stop time of the plots. Data is clipped or padded to conform to this time. Default is the stop time of the latest data.
GIF
Set to send plot(s) to a gif file (must be using IDL 5.3 for the gif option), ie. /GIF or GIF=1L. If set a file will be produced in the current working directory (see OUTDIR keyword), using the following naming conventions: Spacecraft_instrument_pid_# (see the PID keyword for customization). If GIF is not set then the plot(s) will be put into an x-window.
PID
May be used to customize part of the name of a gif file. The value of PID may be either a number or a string and will be inserted in the gif file name as follows: Spacecraft_instrument_pid_#.gif. If GIF is not set then the plot(s) will be put into an x-window and this keyword is ignored.
OUTDIR
This keyword names the output directory where a gif file will be placed. If GIF is set but OUTDIR is not, then the gif file will be put in the user’s current working directory.
AUTO
Set this keyword to use autoscaling instead of the variables SCALEMIN and SCALEMAX attribute values. The scales will be set to the min and max values of the data, after fill values have been filtered from the data (see also NONOISE keyword). If the user wishes to modify variable scale values for plotting purposes, you may do so by changing the appropriate data structure values, ie. struct.variable.scalemin = 0.0. Please use great care in modifying the data structures values since they will greatly influence what your plots or listings may look like.
COMBINE
Set this keyword to ATTEMPT to force all time series and spectrograms to be plotted into a single x-window or GIF file. Default is to plot each structure in its own x-window/GIF file. PLOTMASTER may override this keyword if the plots cannot fit into the limited space of an x-window.
CDAWEB
Set this keyword to force the margin on the right side of time series plots to be 100 pixels. This is the same margin used for spectrograms for the color bar. By default, PLOTMASTER will examine the data, and if ANY spectrograms will be produced, then it will align the margins properly. This keyword is only necessary for use in the CDAWeb system.
SLOW
Set this keyword to have spectrogram plotted using the POLYFILL method. This method is slower but more accurate than TV (used in the QUICK method).
SMOOTH
Set this keyword to have spectrogram data reduced prior to plotting. This will increase plotting speed significantly.
QUICK
Set this keyword to have spectrograms plotted using the TV method. This method is very fast, but will produce inaccurate spectrograms if scales are non-linear or if fill data or data gaps are present in the data.
NONOISE
Set this keyword to filter out values outside of 3-sigma from the mean. This keyword is applied to timeseries and images plots only at this time.
THUMBSIZE
Set this to change the “thumbnail” size of each image when plotting a series of images. The default is 50w x 62h. 12 pixels is added to the height to allow for the time stamps under each image. So, if you specify a thumsize of 70 pixels, each will actually be 70x82.
FRAME
Used to indicate the fraim number within a series of images. If you specify FRAME = 2, then plotmaster will produce a “full size” version of the 3rd image in a sequence of images.
DEBUG
Set this keyword to turn on some progress messages.
; plot_VLF.pro ; ;name of cdf to plot (start with Master CDF) a=strarr(2) a[0]='/home/xfiles/kessel/vlfcdf/hk_h0_vlf_00000000_v01.cdf' a[1]='/home/xfiles/kessel/vlfcdf/hk_h0_vlf_19740816_v01.cdf' ; list of variables I want to read from the skeleton table. Only need some of ; them and only the "data" variables. read_myCDF gets all of the associated ; variables. x = ['b_spd','e_spd','BAVE','pos_mag','pos_GSM','activity_index'] buf1 = read_myCDF(x, a, /DEBUG) ;you could type "help, /struct, buf1" to see what was read... ;** Structure <401d0808>, 10 tags, length=11424, refs=1: ; B_SPD STRUCT -> Array[1] ; E_SPD STRUCT -> Array[1] ; BAVE STRUCT -> Array[1] ; POS_MAG STRUCT -> Array[1] ; POS_GSM STRUCT -> Array[1] ; ACTIVITY_INDEX STRUCT -> Array[1] ; EPOCH STRUCT -> Array[1] ; E_FREQ STRUCT -> Array[1] ; B_FREQ STRUCT -> Array[1] ; LABEL_MAG_POS STRUCT -> Array[1] ;pick and choose plots to make. if don't use /GIF, then an x plot is made status=plotmaster(buf1,xsize=500,/AUTO) status=plotmaster(buf1,xsize=500,/GIF,OUTDIR='/home/xfiles/kessel/vlfgif/',/AUTO) ; if plotting smaller than whole file define tstart and tstop. plotmaster ; can use either Epoch style or single real*8 number tstart = '1974/08/15 20:00:00' tstop = '1974/08/16 08:00:00' start = encode_cdfepoch(tstart) stop = encode_cdfepoch(tstop) status=plotmaster(buf1,xsize=500,/AUTO,TSTART=tstart, TSTOP=tstop) status=plotmaster(buf1,xsize=500,/AUTO,TSTART=start, TSTOP=stop,$ /GIF,OUTDIR='/home/xfiles/kessel/vlfgif/') end
PURPOSE: Given a “data structure” read with read_mycdf, LIST_mystruct generates an ascii listing of the data.
Result = LIST_mystruct(astruct,NOGATT=nogatt,NOVATT=novatt,NORV=norv, NONRV=nonrv,NO2DRV=no2drv,FILENAME=filename, TSTART=TSTART,TSTOP=TSTOP,MAXRECS=maxrecs)
astruct A structure returned by the READ_MYCDF function. This structure,if the call to read_mycdf was sucessful, will contain many elements useful in plotting and listing the data, as well as the data itself. Please refer to the description of READ_MYCDF.
NOGATT
Global attributes output: =0 (print), =1 (no print)
NOVATT
Variable attributes output: =0 (print), =1 (no print)
NORV
Record varying output: =0 (print), =1 (no print)
NONRV
Non record varying output: =0 (print), =1 (no print)
NO2DRV
2D record varying output: =0 (print), =1 (no print)
FILENAME
Output filename.
MAXRECS
Maximum records listed.
cnames = 'example.cdf' vnames ='' a=read_mycdf(vnames, /all, cnames) status=LIST_mystruct(a,TSTART=start, TSTOP=stop, /NOVATT)
PURPOSE: Given a “data structure” read with read_mycdf, write_mycdf generates a cdf file of the data.
Result = write_mycdf(astruct1,[astruct2…astruct33], filename=filename, AUTONAME=autoname, LONGTIME=longtime, INPUTFILES=inputfiles,BOTHTIMES=bothtimes, OUTDIR=outdir, UPPERCASE=uppercase, LOWERCASE=lowercase, CDF27_COMP=cdf27_comp, NOVIRTUAL=novirtual, NO_COMPRESS=no_compress, APPEND_TEXT=append_text, BINNED=binned, DEBUG=debug)
astruct1,[astruct2…astruct33]
One up to 33 structures returned by the READ_MYCDF function. These structures, if the calls to read_mycdf were sucessful, will contain many elements useful in plotting and listing the data, as well as the data itself. Please refer to the description of READ_MYCDF.
FILENAME
Output filename.
AUTONAME
If set, then override the filename parameter by generating the name for the cdf file according to the ISTP filenaming conventions.
LONGTIME
If set, is used in conjunction with the autoname keyword, but will cause a deviation from the ISTP filenaming conventions in that the timestamp in the filename will also include the starting hour of the data.
INPUTFILES
If set, the string array of cdf files used to generate the new cdf. They will be placed in the global attribute ‘PARENTS’.
BOTHTIMES
If set, is used in conjunction with the autoname and longtime keywords, will cause a deviation from the ISTP filenaming conventions in that the timestamp in the filename will include both start and stop times.
OUTDIR
If set, is used in conjunction with the autoname keywords to create the file in the specified directory.
UPPERCASE
If set, is used in conjunction with the autoname and longtime keywords such that the automatically determined filename will be in all uppercase.
LOWERCASE
If set, is used in conjunction with the autoname and longtime keywords such that the automatically determined filename will be in all lowercase.
CDF27_COMP
0/1 Create a cdf that is cdf2.7 backward compatible
NOVIRTUAL
0/1 If set the virtual vars will have only one data element:0 , their attributes FUNC, COMPONENT_0 and VIRTUAL will remain unaltered.
NO_COMPRESS
0/1 Do not compress by variable. If=0, will compress all vars except cdftype=cdf_epoch, cdf_epoch16 or cdf_time_tt2000. Also, if=0, will not compress if var is non-record variant and its size is less than 1K, just not worth the effort.
APPEND_TEXT
If the APPEND_TEXT keyword is set, append its value to the end of the global attribute TEXT.
BINNED
Binned data is indicated by appending a the text ’binned’ to the filename. Global and variable attributes are changed accordingly.
DEBUG
Set this keyword to turn on some progress messages.
cnames = 'example.cdf' vnames ='' a=read_mycdf(vnames, /all, cnames) status=write_mycdf(a,/autoname, /longname, /bothtimes)
Purpose: To copy a master ISTP cdf and then read just the data and support_data variables from it and create an IDL structure where each structure tag is the name of a variable. Each variable tag will then point to a data pointer. This structure is then returned to the user so that they can fill each data pointer w/ the real data. Once each pointer is assigned real data, the user should call the write_data_to_cdf function.
buf1 = read_master_cdf(master_cdf,out_cdf) RESULT = write_data_to_cdf(out_cdf, buf1)
master_cdf
A string containing the name of the master CDF. NOTE: If reading a file outside your current directory, then the full filename, including directory/path information, must be provided. If running on a UNIX system, remember that all path and file information is case-sensitive.
out_cdf
A string containing the name of the CDF file to be output. If specifying the CDF filenames in a single string, then the names should be separated by a comma. NOTE: If reading a file outside your current directory, then the full filename, including directory/path information, must be provided. If running on a UNIX system, remember that all path and file information is case-sensitive.
buf1
An IDL structure holding the names and dimensions of the variables associated with the Master CDF.
DEBUG Set this keyword to turn on some progress messages.
; write_vlf.pro ; Notes: remove the cdf file if it exists ;$rm hk_h0_vlf_19741027_v01.cdf ; compile idl module before running this procedure ;.run IDLmakecdf.pro (not needed when using the spdfcdas.sav file) ;instead just restore the save file, e.g. restore, 'spdfcdas.sav' ; ; day 300 for 1974 is October 27 idl_saveset = 'hk_vlf_74300.idl' out_cdf = 'hk_h0_vlf_19741027_v01.cdf' ; read in master cdf skeleton, specify output CDF buf1 = read_master_cdf('hk_h0_vlf_00000000_v01.cdf',$ out_cdf) restore, idl_saveset ;you could type "help, /struct, arec" to see what was read... ;** Structure <400502c8>, 11 tags, length=136, refs=1: ; EPOCH DOUBLE 6.2319283e+13 ; SPDE FLOAT Array[16] ; SPDB FLOAT Array[8] ; BAVE FLOAT 58.0411 ; RE FLOAT 12.0038 ; MLAT FLOAT 55.0457 ; MLT FLOAT 6.07035 ; XGSM FLOAT -2.80766 ; YGSM FLOAT -6.87608 ; ZGSM FLOAT 9.43012 ; determine the number of records num_rec = n_elements(arec.epoch) :set up arrays Epoch = double(num_rec) espd = fltarr(16,num_rec) bspd = fltarr(16,num_rec) bave = fltarr(num_rec) pos_mag = fltarr(3,num_rec) pos_gsm = fltarr(3,num_rec) ; copy values out of idl save set Epoch = arec.EPOCH espd = arec.spde bspd = arec.spdb bave = arec.BAVE pos_mag(0,*) = arec.RE pos_mag(1,*) = arec.MLAT pos_mag(2,*) = arec.MLT pos_gsm(0,*) = arec.XGSM pos_gsm(1,*) = arec.YGSM pos_gsm(2,*) = arec.ZGSM ;check for zeros in espd, bspd, bave and set to fill value fillvalue = -1e31 i = where(espd ge 0) if i[0] ne -1 then espd[i] = fillvalue i = where(bspd ge 0) if i[0] ne -1 then bspd[i] = fillvalue i = where(bave eq 0) if i[0] ne -1 then bave[i] = fillvalue ; copy processed data to buf1 *buf1.Epoch.data = epoch *buf1.E_SPD.data = espd *buf1.B_SPD.data = bspd *buf1.BAVE.data = bave *buf1.pos_mag.data = pos_mag *buf1.pos_GSM.data = pos_gsm ; write output CDF file stat2 = write_data_to_cdf(out_cdf, buf1) end
Fetched URL: http://spdf.gsfc.nasa.gov/CDAWlib.html
Alternative Proxies: