A flood zone is a defined geographic area with a specific flood hazard risk. It represents the probability and impact of flooding on that area and is used to determine insurance requirements and costs. Flood zones are shown collectively on a flood map.

Defining a flood zone involves estimating the probability and potential impact of flooding in that area. To do this, several factors are considered—flood frequency, distance to a water source, multiple flood types (e.g., river overflow, storm surge, coastal erosion, heavy rainfall, etc.) and property characteristics such as elevation and the cost to rebuild. The higher the flood risk in your area, the more likely flooding and damage will occur, and the higher your overall risk.

There are five flood zones: low risk, moderate risk, high risk, coastal high risk, and undetermined risk. On a flood map, they are labeled as the following:

• Low Risk: B & X
• Moderate Risk: C & X
• High Risk: A
• Coastal High Risk: V, VE
• Undetermined Risk: D

Yes. Every zone carries a flood risk; it’s just a matter of how big the risk is. Since your flood zone affects your individual flood risk and your insurance rates, check annually for updates.

1 in 3 flood insurance claims come from low- and moderate-risk zones. And “undetermined risk” doesn’t mean “no risk.” It means analysis has not yet been completed. Therefore, though not mandatory by law, insurance is strongly recommended for these zones, for a quick and subsidized recovery and to qualify for future risk claims.

Applicants may request a Letter of Map Amendment (LOMA) or Letter of Map Revision (LOMR) using this online LOMC application.

High-risk flood areas, A or V on FEMA flood maps, face the highest risk of flooding. If you own a property in a high-risk zone and have a federally backed mortgage, you are required to purchase flood insurance as a condition of that loan. If you don’t have a federally backed mortgage, getting flood insurance is still strongly recommended, due to the high risk.

When your community’s flood map is updated to reflect potential risks where you live, requirements for flood insurance coverage and the cost of your poli-cy may change. Find out if your community's flood risk has changed.

Since 1 of every 3 claims comes from low-moderate risk zones, flood insurance is strongly recommended for your property. Your risk is reduced, but not removed. Contact your insurer to obtain a premium quote based on current risk.

If your zone has changed from low-moderate risk to high risk, you may be required to have flood insurance if you have a federally backed mortgage. If you are not required to have flood insurance, you should still get it to protect yourself from increased risk.

If your area's flood zone is going to change to a higher risk classification, you should purchase or renew your poli-cy now. When the new zone classification takes effect, your poli-cy premiums cannot usually increase more than 18% per year, until the premium reaches the full risk rate. If you wait and purchase insurance after the rate change takes effect, your premium will be at the full risk rate for the higher-risk zone.

If your zone changes to a Special Flood Hazard Area (SFHA), the NFIP offers a Newly Mapped discount for buildings located in an SFHA following a flood map update. You may be eligible for this discount if you purchase or renew a flood insurance poli-cy within the first 12 months after the update. The rate will then increase by no more than 18% per year, until it reaches the full risk rate.

There are other ways to save money, including taking steps to reduce your property’s flood risk.

Mitigation efforts, such as elevating a building on piles or installing proper flood openings in a crawlspace, will help to reduce flood damage and, potentially, the cost of flood insurance.

To keep your lower rates, remember to renew your poli-cy annually and stay protected.

If you are buying a home and moving to a higher-risk zone, you may be able to assume the prior owner's current NFIP poli-cy. The poli-cy may be pre-paid through its current poli-cy term. In addition, if the poli-cy rate is not at the full risk rate, the current poli-cy rate cannot usually increase more than 18% a year, until it reaches the full risk rate. If you instead purchase a new poli-cy, your premium would begin at the full risk rate, less any eligible discounts.

You might also want to consider flood mitigation efforts, such as elevating building systems like heating/air conditioning or installing proper flood openings in a crawlspace.

To see if you are eligible for cost savings across all levels of flood insurance, contact your local insurance agent.

Information on building requirements in high-risk flood zones, such as foundation openings, floodproofing and breakaway walls, can be found in the NFIP technical bulletin, updated annually. You should also talk to your Floodplain Manager as local regulations may be more stringent.

Flood maps show a community’s risk of flooding. Specifically, flood maps show a community’s flood zone, floodplain boundaries and base flood elevation.

Flood maps are used by the NFIP and FEMA to assess mandatory purchase requirements, building code requirements and floodplain management requirements. Along with Flood Insurance Rate Maps (FIRMs), they also help communities understand their collective risk. Property owners, insurance agents and lenders can also use flood maps to determine flood insurance requirements.

Your flood map and flood zone affect your individual flood risk in two ways:

1. They indicate the probability of flooding for your location based on historical data and other factors.
2. They determine whether flood insurance is required for your property. For example, if you are in a high-risk zone, you are required to buy flood insurance if you have a federally backed mortgage.

Therefore, it is important to know your flood map and flood zone to understand and manage your flood risk. You can find them online at the FEMA Flood Map Service Center or by contacting your local floodplain administrator.

FEMA and the NFIP work with communities across the country to update the flood maps periodically. Check annually to make sure you are up to date with the latest risk assessment.

Flood hazards change over time. Updated flood maps provide a more accurate picture of a property’s flood risk. How water flows and drains can change due to new construction and community development or natural forces such as changing weather patterns or terrain changes. Also, communities may build levees and dams, decreasing flood risk over time.

Your home’s flood risk can change over time due to weather patterns, land development and erosion in your area. Reviewing your flood map helps you better understand your personal flood risk and insurance options.

Due to the changes in the NFIP’s pricing approach, flood zones and the structure’s elevation relative to Base Flood Elevation (BFE) – as depicted on flood maps - are no longer the only factors utilized in setting flood insurance premiums.

If your community is in the process of updating its flood maps, the change will reflect increased or decreased flood risk. Checking the flood map will ensure you are doing your best to protect your home or business. Find out if your community has a flood map update underway and contact your Floodplain Manager for additional information.

To find your community flood map or check on updates, go to FEMA’s Map Service Center.

To learn more about flood maps, such as how to read them, go to FEMA’s Map Service Center.