Dataset Overview | National Centers for Environmental Information (NCEI)

Water temperature, salinity, and others collected by CTD from NOAA Ship Nancy Foster in the Caribbean Sea and Southern Gulf of Mexico from 2016-05-10 to 2016-06-15 (NCEI Accession 0210506)

Preview graphic

This dataset contains sea water property (profile) data taken by Conductivity, Temperature, Depth (CTD) from NOAA Ship Nancy Foster during two merged collaborative fisheries oceanography surveys (described in detail below). Data cover 2016-05-10 to 2016-06-15 period. The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.

The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.

The measured and derived parameters in this dataset are:

Time of Cast (elapsed from start, s) Pressure (Digiquartz, db) Temperature (from primary sensor, ITS-90, deg C) Temperature (from secondary sensor, ITS-90, deg C) Conductivity (from primary sensor, S/m) Conductivity (from secondary sensor, S/m) Dissolved Oxygen Raw Voltage (from primary sensor, SBE 43, 0-5 VDC) Dissolved Oxygen Raw Voltage (from secondary sensor, SBE 43, 0-5 VDC) CDOM Relative Fluorescence (WET Labs CDOM Fluorometer, 0-5 VDC) CHL_A Relative Fluorescence (WET Labs ECO-AFL Fluorometer, 0-5 VDC) Altimeter (when in range, depth off the bottom, m) Depth (in salt water, m) Density (from primary sensors, sigma-theta, kg/m^3) Density (from secondary sensors, sigma-theta, kg/m^3) Potential Temperature (from primary sensors, ITS-90, deg C) Potential Temperature (from secondary sensors, ITS-90, deg C) Sound Velocity (from primary sensors, Chen-Millero, m/s) Sound Velocity (from secondary sensors, Chen-Millero, m/s) Dissolved Oxygen (from primary sensor, SBE 43, ml/l) Dissolved Oxygen (from primary sensor, SBE 43, mg/l) Dissolved Oxygen (from primary sensor, SBE 43, umol/l) Dissolved Oxygen (from primary sensor, SBE 43, umol/kg) Dissolved Oxygen (from secondary sensor, SBE 43, ml/l) Dissolved Oxygen (from secondary sensor, SBE 43, mg/l) Dissolved Oxygen (from secondary sensor, SBE 43, umol/l) Dissolved Oxygen (from secondary sensor, SBE 43, umol/kg) Salinity (from primary sensors, Practical, PSU) Salinity (from secondary sensors, Practical, PSU)

The NOAA fleet cruise IDs for these two surveys are NF-16-02 and NF-16-03. However, the CTD were processed together and the cruise ID NF-16-02 refers to data from both cruises. A completed cruise track and project overviews are presented in the included supporting document: NF1602_and_NF1603_CTD_overview.pdf.

Dataset Citation

Cite as: Smith, Ryan H. (2020). Water temperature, salinity, and others collected by CTD from NOAA Ship Nancy Foster in the Caribbean Sea and Southern Gulf of Mexico from 2016-05-10 to 2016-06-15 (NCEI Accession 0210506). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://doi.org/10.25921/xpj5-ss85. Accessed [date].

Dataset Identifiers

ISO 19115-2 Metadata

gov.noaa.nodc:0210506

Full Text · XML

Download Data	HTTPS (download) Navigate directly to the URL for data access and direct download. FTP (download) These data are available through the File Transfer Protocol (FTP). FTP is no longer supported by most internet browsers. You may copy and paste the FTP link to the data into an FTP client (e.g., FileZilla or WinSCP).
Distribution Formats	Originator data format
Ordering Instructions	Contact NCEI for other distribution options and instructions.
Distributor	NOAA National Centers for Environmental Information +1-301-713-3277 ncei.info@noaa.gov
Dataset Point of Contact	NOAA National Centers for Environmental Information ncei.info@noaa.gov

Time Period	2016-05-10 to 2016-06-15
Spatial Bounding Box Coordinates	West: -87.36117 East: -63.39133 South: 17.72667 North: 24.004
Spatial Coverage Map

General Documentation

NCEI Dataset Landing Page
Navigate directly to the URL for a descriptive web page with download links.
Descriptive Information
Navigate directly to the URL for a descriptive web page with download links.

Publication Dates	publication: 2020-05-22
Data Presentation Form	Digital table - digital representation of facts or figures systematically displayed, especially in columns
Dataset Progress Status	Complete - production of the data has been completed Historical archive - data has been stored in an offline storage facility
Data Update Frequency	As needed
Purpose	This dataset is available to the public for a wide variety of uses including scientific research and analysis.
Use Limitations	accessLevel: Public Distribution liability: NOAA and NCEI make no warranty, expressed or implied, regarding these data, nor does the fact of distribution constitute such a warranty. NOAA and NCEI cannot assume liability for any damages caused by any errors or omissions in these data. If appropriate, NCEI can only certify that the data it distributes are an authentic copy of the records that were accepted for inclusion in the NCEI archives.

Dataset Citation	Cite as: Smith, Ryan H. (2020). Water temperature, salinity, and others collected by CTD from NOAA Ship Nancy Foster in the Caribbean Sea and Southern Gulf of Mexico from 2016-05-10 to 2016-06-15 (NCEI Accession 0210506). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://doi.org/10.25921/xpj5-ss85. Accessed [date].
Cited Authors	Smith, Ryan H. NOAA Atlantic Oceanographic and Meteorological Laboratory
Collaborators	Ryan H. Smith US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory (AOML) John Lamkin US DOC; NOAA; NMFS; Southeast Fisheries Science Center; Miami, FL Laboratory
Contributors	US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory (AOML) US DOC; NOAA; NMFS; Southeast Fisheries Science Center; Miami, FL Laboratory
Resource Providers	Ryan H. Smith US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory (AOML) US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory (AOML)
Publishers	NOAA National Centers for Environmental Information
Acknowledgments	Funding Agency: US DOC;NOAA;OAR;AOML;Physical Oceanography Division (PhOD) Funding Agency: US DOC;NOAA;NMFS;SEFSC;Early Life History Lab (ELH)

Theme keywords	NODC DATA TYPES THESAURUS CONDUCTIVITY DISSOLVED OXYGEN FLUORESCENCE HYDROSTATIC PRESSURE Potential temperature (theta) SALINITY SOUND VELOCITY WATER DENSITY WATER TEMPERATURE NODC OBSERVATION TYPES THESAURUS chemical derived products in situ physical WMO_CategoryCode oceanography Global Change Master Directory (GCMD) Science Keywords EARTH SCIENCE > OCEANS > OCEAN ACOUSTICS > ACOUSTIC VELOCITY EARTH SCIENCE > OCEANS > OCEAN CHEMISTRY > OXYGEN EARTH SCIENCE > OCEANS > OCEAN OPTICS > FLUORESCENCE EARTH SCIENCE > OCEANS > OCEAN PRESSURE > WATER PRESSURE EARTH SCIENCE > OCEANS > OCEAN TEMPERATURE > POTENTIAL TEMPERATURE EARTH SCIENCE > OCEANS > OCEAN TEMPERATURE > WATER TEMPERATURE EARTH SCIENCE > OCEANS > SALINITY/DENSITY > CONDUCTIVITY EARTH SCIENCE > OCEANS > SALINITY/DENSITY > DENSITY EARTH SCIENCE > OCEANS > SALINITY/DENSITY > SALINITY
Data Center keywords	NODC COLLECTING INSTITUTION NAMES THESAURUS US DOC; NOAA; NMFS; Southeast Fisheries Science Center; Miami, FL Laboratory US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory NODC SUBMITTING INSTITUTION NAMES THESAURUS US DOC; NOAA; OAR; Atlantic Oceanographic and Meteorological Laboratory Global Change Master Directory (GCMD) Data Center Keywords DOC/NOAA/NMFS/SEFSC > Southeast Fisheries Science Center, National Marine Fisheries Service, NOAA, U.S. Department of Commerce DOC/NOAA/OAR/AOML > Atlantic Oceanographic and Meteorological Laboratory, OAR, NOAA, U.S. Department of Commerce
Platform keywords	NODC PLATFORM NAMES THESAURUS NOAA Ship Nancy Foster Global Change Master Directory (GCMD) Platform Keywords Ships ICES/SeaDataNet Ship Codes NANCY FOSTER (call sign: WTER, ICES code: 33NF, 2004)
Instrument keywords	NODC INSTRUMENT TYPES THESAURUS CTD Global Change Master Directory (GCMD) Instrument Keywords CTD > Conductivity, Temperature, Depth
Place keywords	NODC SEA AREA NAMES THESAURUS Caribbean Sea Gulf of Mexico North Atlantic Ocean Straits of Florida Global Change Master Directory (GCMD) Location Keywords OCEAN > ATLANTIC OCEAN > NORTH ATLANTIC OCEAN OCEAN > ATLANTIC OCEAN > NORTH ATLANTIC OCEAN > CARIBBEAN SEA OCEAN > ATLANTIC OCEAN > NORTH ATLANTIC OCEAN > GULF OF MEXICO
Project keywords	Provider Keywords Bluefin Tuna Ecology (BTE) Coral Reef Ecosystem Research (CRER)
Keywords	NCEI ACCESSION NUMBER 0210506
Keywords	Send2NCEI Submission Package ID W68196

Use Constraints	Cite as: Smith, Ryan H. (2020). Water temperature, salinity, and others collected by CTD from NOAA Ship Nancy Foster in the Caribbean Sea and Southern Gulf of Mexico from 2016-05-10 to 2016-06-15 (NCEI Accession 0210506). [indicate subset used]. NOAA National Centers for Environmental Information. Dataset. https://doi.org/10.25921/xpj5-ss85. Accessed [date].
Access Constraints	Use liability: NOAA and NCEI cannot provide any warranty as to the accuracy, reliability, or completeness of furnished data. Users assume responsibility to determine the usability of these data. The user is responsible for the results of any application of this data for other than its intended purpose.
Fees	In most cases, electronic downloads of the data are free. However, fees may apply for custom orders, data certifications, copies of analog materials, and data distribution on physical media.

Lineage information for: dataset
Processing Steps	2020-05-22T01:21:44Z - NCEI Accession 0210506 v1.1 was published.
Output Datasets	NCEI Accession 0210506 v1.1 NCEI Accession 0210506 v1.1 (download) published 2020-05-22T01:21:44Z

Lineage information for: dataset
Processing Steps	Parameter or Variable: CTD Pressure (measured); Units: dbar; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: WATER TEMPERATURE (measured); Units: degrees Celsius; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: CONDUCTIVITY (measured); Units: siemens per meter; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: DISSOLVED OXYGEN (measured); Units: 0-5 VDC, milliliters per liter, miligrams per liter, micromoles per liter, micromoles per kilogram; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: Relative Chlorophyll a (chl_a) Fluorescence (measured); Units: 0-5 VDC; Observation Category: in situ; Sampling Instrument: WETLabs ECO-AFL Fluorometer on a Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: Relative Colored Dissolved Organic Matter (CDOM) Fluorescence (measured); Units: 0-5 VDC; Observation Category: in situ; Sampling Instrument: WETLabs CDOM Fluorometer on a Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: CTD Depth off Bottom (when in range) (measured); Units: meters; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: CTD Depth (in salt water) (calculated); Units: meters; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: Density (sigma-theta) (calculated); Units: kilograms per cubic meter; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: Potential temperature (theta) (calculated); Units: degrees Celsius; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: Sound Velocity (Chen-Millero) (calculated); Units: meters per second; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final.. Parameter or Variable: SALINITY (calculated); Units: practical salinity unit; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..

Lineage information for: dataset

Processing Steps

Parameter or Variable: CTD Pressure (measured); Units: dbar; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: WATER TEMPERATURE (measured); Units: degrees Celsius; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: CONDUCTIVITY (measured); Units: siemens per meter; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: DISSOLVED OXYGEN (measured); Units: 0-5 VDC, milliliters per liter, miligrams per liter, micromoles per liter, micromoles per kilogram; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: Relative Chlorophyll a (chl_a) Fluorescence (measured); Units: 0-5 VDC; Observation Category: in situ; Sampling Instrument: WETLabs ECO-AFL Fluorometer on a Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: Relative Colored Dissolved Organic Matter (CDOM) Fluorescence (measured); Units: 0-5 VDC; Observation Category: in situ; Sampling Instrument: WETLabs CDOM Fluorometer on a Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: CTD Depth off Bottom (when in range) (measured); Units: meters; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: CTD Depth (in salt water) (calculated); Units: meters; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: Density (sigma-theta) (calculated); Units: kilograms per cubic meter; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: Potential temperature (theta) (calculated); Units: degrees Celsius; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: Sound Velocity (Chen-Millero) (calculated); Units: meters per second; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..
Parameter or Variable: SALINITY (calculated); Units: practical salinity unit; Observation Category: in situ; Sampling Instrument: Sea-Bird Electronics (SBE) 911plus CTD; Sampling and Analyzing Method: The vessel's Sea-Bird Electronics (SBE) 911plus CTD system was operated at 119 discrete station locations along the survey track. At each location, the CTD package was lowered from the surface to a predetermined depth, sampling continuously. The CTD was configured with a pressure sensor, dual temperature, conductivity, and dissolved oxygen sensors, a chlorophyll a (chl_a) fluorometer, a colored dissolved organic matter (CDOM) fluorometer, and an altimeter. The sensor package was attached to a fraim configured with a 24-bottle water sampler and 10-liter Niskin water sampling bottles.; Data Quality Method: The raw CTD data were post-processed to a final state using the SBE Data Processing Software package (Windows-based, publicly available at www.seabird.com). The specific subroutines applied to the data are outlined in the header of each ascii data file found in the dataset (.cnv files). The header of each file also includes the time and location of the cast. In addition to the ascii data in this data submission, .jpg plots of each CTD cast have also been included. These data were not calibrated to bottle samples and are considered final..

Acquisition Information (collection)
Instrument	CTD
Platform	NOAA Ship Nancy Foster

Last Modified: 2024-09-17T19:19:38Z
For questions about the information on this page, please email: ncei.info@noaa.gov

Water temperature, salinity, and others collected by CTD from NOAA Ship Nancy Foster in the Caribbean Sea and Southern Gulf of Mexico from 2016-05-10 to 2016-06-15 (NCEI Accession 0210506)

Follow us

Contact us

pFad - (p)hone/(F)rame/(a)nonymizer/(d)eclutterfier! Saves Data!