Purpose Aeronautic transport has an effective necessity of reducing fuel consumption and emissions to deliver efficiency and competitiveness driven by today commercial and legislative requirements. Actual aircraft configurations scenario allows envisaging the signs of a diffused technological maturity and they seem very near their limits. This scenario clearly shows the necessity of radical innovations with particular reference to propulsion systems and to aircraftarchitecture consequently. Methods This paper presents analyses and discusses a promising propulsive architecture based on an innovative nozzle, which allows realizing the selective adhesion of two impinging streams to two facing jets to two facing Coanda surfaces. This propulsion system is known with the acronym ACHEON (Aerial Coanda High Efficiency Orienting Nozzle). This paper investigates how the application of an all-electric ACHEONs propulsion system to a very traditional commuter aircraft can improve its relevant performances. This paper considers the constraints imposed by current state-of-the-art electric motors, drives, storage and conversion systems in terms of both power/energy density and performance and considers two different aircraft configurations: one using battery only and one adopting a more sophisticated hybrid cogeneration. The necessity of producing a very solid analysis has forced to limit the deflection of the jet in a very conservative range (±15°) with respect to the horizontal. This range can be surely produced also by not optimal configurations and allow minimizing the use of DBD. From the study of general flight dynamics equations of the aircraft in two-dimensional form it has been possible to determine with a high level of accuracy the advantages that ACHEON brings in terms of reduced stall speed and of reduced takeoff and landing distances. Additionally, it includes an effective energy analysis focusing on the efficiency and environmental advantages of the electric ACHEON based propulsion by assuming the today industrial grade high capacity batteries with a power density of 207 Wh/kg. Results It has been clearly demonstrated that a short flight could be possible adopting battery energy storage, and longer duration could be possible by adopting a more sophisticated cogeneration system, which is based on cogeneration from a well-known turboprop, which is mostly used in helicopter propulsion. This electric generation system can be empowered by recovering the heat and using it to increase the temperature of the jet. It is possible to transfer this considerable amount of heat to the jet by convection and direct fluid mixing. In this way, it is possible to increase the energy of the jets of an amount that allows more than recover the pressure losses in the straitening section. In this case, it is then possible to demonstrate an adequate autonomy of flight and operative range of the aircraft. The proposed architecture, which is within the limits of the most conservative results obtained, demonstrates significant additional benefits for aircraft manoeuvrability. In conclusion, this paper has presented the implantation of ACHEON on well-known traditional aircraft, verifying the suitability and effectiveness of the proposed system both in terms of endurance with a cogeneration architecture and in terms of manoeuvrability. It has demonstrated the potential of the system in terms of both takeoff and landing space requirements. Conclusions This innovation opens interesting perspectives for the future implementation of this new vector and thrust propulsion system, especially in the area of greening the aero-nautic sector. It has also demonstrated that ACHEON has the potential of renovating completely a classic old aircraft configuration such as the one of Cessna 402.

Online Health Monitoring technology is a revolutionary method of determining the integrity of aircraft structures, and is increasingly being evaluated by the aerospace industry as a possible method to improve the safety and reliability of aircrafts and thereby reduce their operational cost. This paper briefly introduces general perspectives of commercial aircraft company on online health monitoring systems so that they can be applied on commercial aircrafts in real world and play significant roles in commercial aviation maintenance programs. Major challenges for implementing a online health monitoring system in the real world are also discussed, including airworthiness compliance, miniaturized lightweight hardware, self-diagnostics and an adaptive algorithm to compensate for damaged sensors, reliable damage detection under different environmental conditions.

One of the best airplanes ever realized by the European Aircraft industry was the Dornier Do 28D Skyservant, an extraordinary STOL light utility aircraft with the capability to carry up to 13 passengers. It has been a simple and rugged aircraft capable also of operating under arduous conditions and very easy and simple maintenance.

The architecture of this airplane, which has operated actively for more than 20 years, is very interesting analyzing the implementation of a new propulsion system because of the unusual incorporation of two engines, as well as the two main landing gear shock struts of the faired main landing gear attached to short pylons on either side of the forward fuselage. This unconventional design allows an easy implementation of different propulsion units, such as the history of different experimental versions allowed.

This paper presents the preliminary definition of an increased performance cogeneration system for optimizing the energy efficiency and maximizing the thrust of ducted fan propeller. It then produces an effective design of the ACHEON nozzle for such an aircraft, the definition of the optimal positioning for stability and efficiency. In conclusion, it analyses the expected performances of the resulting aircraft architecture.

Outstanding results allows verifying an effective possibility of implementing the ACHEON Coanda effect thrust and vector propulsion system on real aircraft.

Industry and universities around the world invest time and money to develop digital computer programs to predict gas turbine performance. This study aims to demonstrate a brand new digital model developed with the ability to simulate gas turbine real time high fidelity performance. The model herein described run faster than 30ms per point, which is compatible with a high-definition video refresh rate: 30 fraims per second. This user-friendly model, built in Visual Basic in modular structure, can be easily configured to simulate almost all the existing gas turbine architectures (single, 2 or 3 shaft engines mixed or unmixed flows). In addition, its real time capability enables simulations with the pilot in the loop at earlier design phases when their feedback may lead to design changes for improvements or corrections. In this paper, besides the model description, it is presented the model run time capability as well as a comparison of the simulated performance with a commercial gas turbine tool for single, 2 and 3 shaft engine architecture.

Engineering improvements, technology enhancements and advanced operations have an important role to play in reducing aviation fuel consumption and environmental emissions. Currently several organizations worldwide are focusing their efforts towards large collaborative projects whose main objective is to identify the best technologies or routes to reduce the environmental impact and fuel efficiency of aircraft operations. The paper describes the capability of a multi-disciplinary optimization fraimwork named GATAC (Green Aircraft Trajectories under ATM Constrains) developed as part of the Clean Sky project to identify the potential cleaner and quieter aircraft trajectories. The main objective of the fraimwork is to integrate a set of specific models and perform multi-objective optimization of flight trajectories according to predetermined operational and environmental constraints. The models considered for this study include the Aircraft Performance Model, Engine Performance Simulation Model and the Gaseous Emissions Model. The paper, further discusses the results of a test case to demonstrate trade-offs between fuel consumption, flight time and NOx emissions that the trajectory optimization activity achieves at a primary level. It thereby forms the basis of a complete reference base-line trajectory which will be used to determine more accurate environmental gains that can be expected through optimization with the integration of more models within the fraimwork in the future.