

Distributed EDEX

AWIPS makes use of service-oriented architecture to request, process, and serve real-time meteorological data. While originally developed for use on internal NWS forecast office networks, where operational installations of AWIPS could consist of a dozen servers or more, the early NSF Unidata releases were stripped of operations-specific configurations and plugins, and released as a standalone server. This worked, since (at the time) a single EDEX instance with an attached SSD could handle most of NOAAport. However, with GOES-R(16) coming online in 2017, and more gridded forecast models being created at finer temporal and spatial resolutions, there is now a need to distribute the data decoding across multiple machines to handle this firehose of data.

---

NSF Unidata's Current EDEX Server

Currently, we use a distributed architecture comprised of three machines: 1 main EDEX machine and 2 ancillary EDEX machines. The main EDEX machine decodes and processes the majority of the data, while serving and storing all of the data. Our two ancillary machines -- one for radar data and one for satellite data -- each decode and process a subset of the data and send it back to the main EDEX for storage and requesting.

The main EDEX is an instance of our Database and Request Server and more information on our ancillary EDEX machines is below as well.

---

Example Installation

This walkthrough will install different EDEX components on two machines in the XSEDE Jetstream Cloud, the first is used to store and serve while the second is used to ingest and decode data.

---

Database/Request Server

For this example, this server will be referred to by the IP address 10.0.0.9.

1. Install

wget https://downloads.unidata.ucar.edu/awips2/current/linux/awips_install.sh
chmod 755 awips_install.sh
sudo ./awips_install.sh --database

2. IPtables Config

It is required that ports 5432 and 5672 be open for the specific IP addresses of outside EDEX ingest servers. It is not recommended that you leave port 5432 open to all connections (since the default awips database password is known, and is not meant as a security measure). Further, it is recommended that you change the default postgres awips user password (which then requires a reconfiguration of every remote EDEX ingest server in order to connect to this database/request server).

vi /etc/sysconfig/iptables

*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
:EXTERNAL - [0:0]
:EDEX - [0:0]
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp --icmp-type any -j ACCEPT
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 9581 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 9582 -j ACCEPT
-A INPUT -s 10.0.0.7 -j EDEX
-A INPUT -j EXTERNAL
-A EXTERNAL -j REJECT
-A EDEX -m state --state NEW -p tcp --dport 5432 -j ACCEPT
-A EDEX -m state --state NEW -p tcp --dport 5672 -j ACCEPT
-A EDEX -j REJECT
COMMIT

Note the line -A INPUT -s 10.0.0.7 -j EDEX as well as the following -A EDEX ... rules for ports 5432 (PostgreSQL) and 5672 (PyPIES/HDF5).

The two ports left open to all connections (9581,9582) in addition to default port 22 are for outside CAVE client connections

3. Database Config

In the file /awips2/database/data/pg_hba.conf you define remote connections for all postgres tables with as <IP address>/32, after the block of IPv4 local connections and generic <IP address/24> for hostnossl:

vi /awips2/database/data/pg_hba.conf

# "local" is for Unix domain socket connections only
local      all         all                               trust
hostssl    all         all         162.0.0.0/8           cert clientcert=1
hostssl    all         all         127.0.0.1/32          cert clientcert=1

hostssl    all         all         10.0.0.7/32           cert clientcert=1
hostnossl  postgres    all         10.0.0.0/24           md5
hostnossl  fxatext     all         10.0.0.0/24           md5
hostnossl  metadata    all         10.0.0.0/24           md5

# IPv6 local connections:
hostssl    all   all         ::1/128               cert clientcert=1
hostnossl  all   all         ::1/128               md5

4. Start EDEX

edex start database

This will start PostgreSQL, httpd-pypies, Qpid, and the EDEX Request JVM (and will not start the LDM or the EDEX Ingest and IngestGrib JVMs)

5. Monitor Services

The command edex will show which services are running, and for a Database/Request server, will not include the LDM, EDEXingest, or EDEXgrib:

edex

[edex status]
postgres    :: running :: pid 571
pypies      :: running :: pid 639
qpid        :: running :: pid 674
EDEXingest  :: not running
EDEXgrib    :: not running
EDEXrequest :: running :: pid 987 1029 23792

Since this Database/Request server is not running the main edexIngest JVM, we won't see anything from edex log, instead watch the Request Server with the command

edex log request

Confirm that EDEX Request connects to PostgreSQL!

With the above edex log request, ensure that the log progresses past this point:

Spring-enabled Plugins:
-----------------------
acars-common, acars-common-dataaccess, acarssounding-common, activetable-common,
activetable-request, airep-common, airep-common-dataaccess, airmet-common, 
atcf-common, atcf-request, auth-request, awipstools-request, aww-common...

JAXB context for PersistencePathKeySet inited in: 5ms
INFO 20:21:09,134 5584 [EDEXMain] Reflections: Reflections took 436 ms to scan 258 urls, producing 31 keys and 3637 values
Found 499 db classes in 720 ms

If the log stops at the Found db classes... line, that means EDEX is not connecting to PostgreSQL - double-check DB_ADDR in /awips2/edex/bin/setup.env

---

Ancillary EDEX Server (Ingest/Decode EDEX Server)

For this example, this server will be referred to by the IP address 10.0.0.7. The Main EDEX server will be referred to by the IP address 10.0.0.9.

1. Install

wget https://downloads.unidata.ucar.edu/awips2/current/linux/awips_install.sh
chmod 755 awips_install.sh
sudo ./awips_install.sh --ingest

2. EDEX Config

vi /awips2/edex/bin/setup.env

Here you should redefine DB_ADDR and PYPIES_SERVER to point to the Main or Database/Request server (10.0.0.9) and the EXT_ADDR to point to the current Ingest server (10.0.0.7)

export EXT_ADDR=10.0.0.7

# postgres connection
export DB_ADDR=10.0.0.9
export DB_PORT=5432

# pypies hdf5 connection
export PYPIES_SERVER=http://10.0.0.9:9582

# qpid connection
export BROKER_ADDR=${EXT_ADDR}

Notice that EXT_ADDR and BROKER_ADDR (qpid) should remain defined as the localhost IP address (10.0.0.7)

3. Modify the edexServiceList

Most likely if you are running a distributed EDEX setup, you are only processing a subset of data. You can change your edexServiceList to only run the processes you need. You will need to update the /etc/init.d/edexServiceList file. For example replace the services with the associated right column based on the data you're processing:

export SERVICES=('')

Data Processing:	edexServiceList
radar	ingestRadar
satellite	ingestGoesR
model	ingestGrids, ingestGrib

4. Configure your LDM

You'll want to modify your pqact.conf file to store only the data you want processed. There are example files in /awips2/ldm/etc that you can copy over to the main pqact.conf file. For example if you are wanting to process goesr data only, you can do the following steps:

cd /awips2/ldm/etc
mv pqact.conf pqact.conf.orig
cp pqact.goesr pqact.conf

You will also want to edit the pqact.conf file on your Main EDEX and comment out any entries you're processing on this EDEX server.

5. Start EDEX

edex start

This will start LDM, Qpid and the specified EDEX Ingest JVMs (and not start PostgreSQL, httpd-pypies, or the EDEX Request JVM)

4. Monitor Services

Watch the edex JVM log with the command

edex log

Confirm that EDEX connects to PostgreSQL!

With the above edex log, ensure that the log progresses past this point:

Spring-enabled Plugins:
-----------------------
acars-common, acars-common-dataaccess, acarssounding-common, activetable-common,
activetable-ingest, airep-common, airep-common-dataaccess, airmet-common, 
atcf-common, atcf-ingest, aww-common...

JAXB context for PersistencePathKeySet inited in: 5ms
INFO 20:21:09,134 5584 [EDEXMain] Reflections: Reflections took 436 ms to scan 258 urls, producing 31 keys and 3637 values
Found 499 db classes in 720 ms

If the log stops at the Found db classes... line, that means EDEX is not connecting to the remote PostgreSQL instance - double-check DB_ADDR in /awips2/edex/bin/setup.env

You can manually check remote PostgreSQL connectivity on any EDEX Ingest server from the command line:

su - awips
psql -U awips -h <remote IP address> -p 5432 metadata

Where the default passwd is awips and is defined in files in /awips2/edex/conf/db/hibernateConfig/

---

Additional Notes

• Be mindful of what IP address and hostnames are used in /awips2/edex/bin/setup.env and /awips2/database/data/pg_hba.conf, and that they are resolvable from the command line. Consult or edit /etc/hosts as needed.

• You can install multiple awips2-ingest servers, each decoding a different dataset or feed, all pointing to the same Database/Request server (DB_ADDR and PYPIES_SERVER in /awips2/edex/bin/setup.env):

• Every EDEX Ingest IP address must be allowed in both iptables and pg_hba.conf as shown above.