WizFi360

Overview

WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications.

Figure: WizFi360-PA(PCB Antena)

Figure: WizFi360-CON(U.fl Connector Antena)

Figure: WizFi360-EVB

---

Features

• WiFi 2.4G, 802.11 b/g/n
• Supports Station / SoftAP / SoftAP+Station operation modes
• Supports “Data pass-through” and “AT command data transfer” mode
• Supports serial AT command configuration
• Supports TCP Server / TCP Client / UDP operating mode
• Supports configuration of operating channel 1 ~ 13
• Supports auto 20MHz / 40MHz bandwidth
• Supports WPA_PSK / WPA2_PSK encryption
• Serial port baud rate up from 600bps to 2Mbps with 16 common values
• Supports up to 5 TCP / UDP links
• Obtaining IP address automatically from the DHCP server (Station mode)
• DHCP service for Wireless LAN clients (AP mode)
• Supports DNS for communication with servers by domain name
• Supports “Keep-Alive” to monitor TCP connection
• Supports “Ping” for monitoring network status
• Built-in SNTP client for receiving the network time
• Supports built-in unique MAC address and user configurable
• Supports firmware upgrade by UART Download / OTA (via WLAN)
• Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
• KC, CE, FCC, TELEC certification 

---

Details

• Documents

  • 🌎Datasheet : A brief introduce about WizFi360. These documents describe the Features, package information and etc.
  • AT Instruction set: It describes the AT Command of WizFi360 and you can confirm the return message by AT command of WizFi360.
  • AT command Example: It includes the Basic example using AT command and it is examples of TCP, UDP, SSL use.
  • Quick Start Guide: The examples using the WizFi360-EVB or WizFi360io, it describes the scenarios in order from Hardware setting to example of AT command use
  • Firmware Update Guide: The method of using how to upload firmware
  • Application Notes: The example of Application, TCP/UDP, etc test using the Arduino
  • AT Command Comparison Sheet: The AT command comparison with esp8266

• 🌎Ref schematic: Support the schematic of WizFi360-EVB to Gerber, Partlist, Schematic format.

For more information visit the 🌎WizFi360 Github.

---

Q & A

🌎WizFi360 Forum : WIZnet Forum for Technical support and Project sharing

---