Linux Audio

Check our new training course

Loading...
/* SPDX-License-Identifier: GPL-2.0 */
/*
 * devfreq_cooling: Thermal cooling device implementation for devices using
 *                  devfreq
 *
 * Copyright (C) 2014-2015 ARM Limited
 *
 */

#ifndef __DEVFREQ_COOLING_H__
#define __DEVFREQ_COOLING_H__

#include <linux/devfreq.h>
#include <linux/thermal.h>


/**
 * struct devfreq_cooling_power - Devfreq cooling power ops
 * @get_real_power:	When this is set, the framework uses it to ask the
 *			device driver for the actual power.
 *			Some devices have more sophisticated methods
 *			(like power counters) to approximate the actual power
 *			that they use.
 *			This function provides more accurate data to the
 *			thermal governor. When the driver does not provide
 *			such function, framework just uses pre-calculated
 *			table and scale the power by 'utilization'
 *			(based on 'busy_time' and 'total_time' taken from
 *			devfreq 'last_status').
 *			The value returned by this function must be lower
 *			or equal than the maximum power value
 *			for the current	state
 *			(which can be found in power_table[state]).
 *			When this interface is used, the power_table holds
 *			max total (static + dynamic) power value for each OPP.
 */
struct devfreq_cooling_power {
	int (*get_real_power)(struct devfreq *df, u32 *power,
			      unsigned long freq, unsigned long voltage);
};

#ifdef CONFIG_DEVFREQ_THERMAL

struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
				  struct devfreq_cooling_power *dfc_power);
struct thermal_cooling_device *
of_devfreq_cooling_register(struct device_node *np, struct devfreq *df);
struct thermal_cooling_device *devfreq_cooling_register(struct devfreq *df);
void devfreq_cooling_unregister(struct thermal_cooling_device *dfc);
struct thermal_cooling_device *
devfreq_cooling_em_register(struct devfreq *df,
			    struct devfreq_cooling_power *dfc_power);

#else /* !CONFIG_DEVFREQ_THERMAL */

static inline struct thermal_cooling_device *
of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
				  struct devfreq_cooling_power *dfc_power)
{
	return ERR_PTR(-EINVAL);
}

static inline struct thermal_cooling_device *
of_devfreq_cooling_register(struct device_node *np, struct devfreq *df)
{
	return ERR_PTR(-EINVAL);
}

static inline struct thermal_cooling_device *
devfreq_cooling_register(struct devfreq *df)
{
	return ERR_PTR(-EINVAL);
}

static inline struct thermal_cooling_device *
devfreq_cooling_em_register(struct devfreq *df,
			    struct devfreq_cooling_power *dfc_power)
{
	return ERR_PTR(-EINVAL);
}

static inline void
devfreq_cooling_unregister(struct thermal_cooling_device *dfc)
{
}

#endif /* CONFIG_DEVFREQ_THERMAL */
#endif /* __DEVFREQ_COOLING_H__ */
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy