Terphenyls are a group of closely related aromatic hydrocarbons. Also known as diphenylbenzenes or triphenyls, they consist of a central benzene ring substituted with two phenyl groups. There are three substitution patterns: ortho-terphenyl, meta-terphenyl, and para-terphenyl. Commercial grade terphenyl is generally a mixture of the three isomers. This mixture is used in the production of polychlorinated terphenyls, which were formerly used as heat storage and transfer agents.[2]

para-Terphenyl
Skeletal formula of para-terphenyl
Ball-and-stick model of para-terphenyl
Names
Preferred IUPAC name
11,21:24,31-Terphenyl[1]
Other names
1,1':4',1''-Terphenyl[1]
p-Terphenyl
1,4-Diphenylbenzene
para-Diphenylbenzene
p-Diphenylbenzene
para-Triphenyl
p-Triphenyl
Identifiers
3D model (JSmol)
1908447
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.043.146 Edit this at Wikidata
EC Number
  • 202-205-2
RTECS number
  • WZ6475000
UNII
  • InChI=1S/C18H14/c1-3-7-15(8-4-1)17-11-13-18(14-12-17)16-9-5-2-6-10-16/h1-14H ☒N
    Key: XJKSTNDFUHDPQJ-UHFFFAOYSA-N ☒N
  • (para): InChI=1/C18H14/c1-3-7-15(8-4-1)17-11-13-18(14-12-17)16-9-5-2-6-10-16/h1-14H
    Key: XJKSTNDFUHDPQJ-UHFFFAOYAJ
  • C1=CC=C(C=C1)C2=CC=C(C=C2)C3=CC=CC=C3
  • (para): c1ccc(cc1)c2ccc(cc2)c3ccccc3
Properties
C18H14
Molar mass 230.310 g·mol−1
Appearance White powder[2]
Density 1.24 g/cm3
Melting point 212 to 214 °C (414 to 417 °F; 485 to 487 K)[2]
212-213 °C[4]
Boiling point 389 °C (732 °F; 662 K)[4]
Insoluble[2]
1.65[3]
Hazards
GHS labelling:
GHS07: Exclamation markGHS09: Environmental hazard
Warning
H315, H319, H335, H400
P261, P264, P271, P273, P280, P302+P352, P304+P340, P305+P351+P338, P312, P321, P332+P313, P337+P313, P362, P391, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
1
0
Flash point 207 °C (405 °F; 480 K)[4]
NIOSH (US health exposure limits):
PEL (Permissible)
C 9 mg/m3 (1 ppm)[5][6][7]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

p-Terphenyl derivatives are found in various fungi and bacteria. One example is atromentin, a pigment found in some mushrooms. These natural p-terphenyls are better described as diphenylquinones or diphenylhydroquinones. Some m-terphenyl compounds occur in plants.[8]

See also

edit

References

edit
  1. ^ a b Nomenclature of Organic Chemistry : IUPAC Recommendations and Preferred Names 2013 (Blue Book). Cambridge: The Royal Society of Chemistry. 2014. p. 345. doi:10.1039/9781849733069-00130. ISBN 978-0-85404-182-4.
  2. ^ a b c d p-Terphenyl at chemicalland21.com
  3. ^ "Organic molecular single crystals". cryos-beta.kharkov.ua.
  4. ^ a b c p-Terphenyl at Sigma-Aldrich
  5. ^ NIOSH Pocket Guide to Chemical Hazards. "#0591". National Institute for Occupational Safety and Health (NIOSH).
  6. ^ NIOSH Pocket Guide to Chemical Hazards. "#0592". National Institute for Occupational Safety and Health (NIOSH).
  7. ^ NIOSH Pocket Guide to Chemical Hazards. "#0593". National Institute for Occupational Safety and Health (NIOSH).
  8. ^ Liu, Ji-Kai (2006). "Natural Terphenyls: Developments since 1877". Chemical Reviews. 106 (6): 2209–2223. doi:10.1021/cr050248c. PMID 16771447.
edit
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy