Jump to content

E-6 process

From Wikipedia, the free encyclopedia
An example of slide film requiring development using the E-6 process

The E-6 process (often abbreviated to E-6) is a chromogenic photographic process for developing Ektachrome, Fujichrome and other color reversal (also called slide or transparency) photographic film.

Unlike some color reversal processes (such as Kodachrome K-14) that produce positive transparencies, E-6 processing can be performed by individual users with the same equipment that is used for processing black and white negative film or C-41 color negative film. The process is highly sensitive to temperature variations: a heated water bath is mandatory to stabilize the temperature at 100.0 °F (37.8 °C) for the first developer and first wash to maintain process tolerances.

History

[edit]

The E-6 process superseded Kodak's E-3 and E-4 processes. The E-3 process required fogging with light to accomplish image reversal and produced transparencies that faded quickly. The E-4 process used polluting chemicals, such as the highly toxic reversal agent borane tert-butylamine (TBAB).[1]

Non-Kodak color reversal films introduced in the 1980s were compatible with the E-6 process, including variants of Fujichrome and Agfachrome, sold by Fujifilm and Agfa-Gevaert, respectively; one notable exception was Fujichrome 1600 Professional D, which was compatible with E-6 but used a customized PZ process for best results.[2] The PZ process was similar to E-6, but used a different fog-suppressing chemical.[3]

  • An example of processed slide film showing a positive image
    An example of processed slide film showing a positive image
  • The E-6 process results in positive images that can be mounted and presented as slides
    The E-6 process results in positive images that can be mounted and presented as slides

Process variations

[edit]

There are two versions of the E-6 process. Commercial laboratories use a six-bath chemical process. The 'hobby' type chemistry kits, such as those produced by Tetenal, use three chemical baths that combine the color developer and fogging (reversal) bath solutions, and the pre-bleach, bleach and fixer bath solutions. Rinses, washes, stop baths and stabilizer/final rinse (the final step of the process) are not counted as baths when describing both the conventional six bath and hobbyist three bath processes.

Six-bath process

[edit]
E-6 film structure and exposure
Structure
Sample exposure to various colors

The structure of E-6 film has three separate light-sensitive layers; each layer is sensitive to a different group of wavelengths corresponding to red, green, and blue colors. When the film is exposed, each layer records a latent image based on its sensitivity. A yellow filter prevents blue light from exposing the green- and red-sensitive layers, which have some sensitivity to blue light.[4]

Kodak Publication Z-119 provides instructions for various methods to carry out the E-6 process,[5] including the use of continuous processors,[6] roller-transport processors,[7] rack-and-tank processors,[8] batch processing,[9] and rotary-tube processors;[10] however, they largely share the same steps and recommendations for time and temperature with the exception of rotary-tube processors. The first developer, first wash, and reversal bath must be carried out in darkness.[6][9]


Process E-6[5]
Step Time[6][9] (min.) Temp.[6][9] Schematic Description
  1 First developer bath Bath 1 6 98–103 °F (36.7–39.4 °C) This uses a potassium hydroquinone monosulfonate–phenidone black & white film developer, with the preferred form of phenidone being 4-hydroxymethyl-4-methyl-1-phenyl-3-pyrazolidinone (13047-13-7). The first developer forms a negative silver image in each layer of the film. The first developer is time and temperature sensitive because it controls contrast.[5]
2 First wash   2 92–103 °F (33.3–39.4 °C) This step once used an acetic acid stop bath, but was replaced with a water-only bath for process economy, with concomitant slight reduction of first developer strength.[5]
3 Reversal bath Bath 2 2 75–103 °F (23.9–39.4 °C) This bath prepares the film for the color developer step. A chemical reversal agent is absorbed into the emulsion, which is instantly effective. The reversal step can also be carried out using 800 footcandle-seconds (8.6 klx·s) of light — this variation is used by process engineers to troubleshoot reversal bath chemistry problems such as contamination and issues of low tank turnover as process volumes decline.[5]
  4 Color developer bath Bath 3 6 98–103 °F (36.7–39.4 °C) This step is carried out to completion. The developer contains CD-3 developing agent, and acts upon the chemically exposed silver halide that was not developed in the first developer to form a positive silver image. The metallic negative silver image formed in the first developer has no part in the reaction of this step. As the color development progresses, a metallic positive silver image is formed and the color developing agent is oxidized. Oxidized color developer molecules react with the color couplers and color dyes are formed in each of the three layers of the film.[5] Each layer of the film contains different color couplers, which react with the same oxidized developer molecules but form different color dyes. Variation in color developer pH causes color shifts on the green-magenta axis with Kodak E100G & E100GX and Fujichrome films and on the yellow-blue axis with older Ektachrome films.[11]
5 Pre-bleach bath Bath 4 2 75–103 °F (23.9–39.4 °C) This bath was previously called "conditioner", but was renamed pre-bleach in the mid-1990s to reflect the removal of formaldehyde from the process used in the final rinse. In this solution, formaldehyde acts as a dye preservative and EDTA is used to "kick off" the bleach. The pre-bleach bath relies on carry-over of the color developer to function properly, therefore there is no wash step between the color developer and pre-bleach baths.[5]
6 Bleach bath Bath 5 6 92–103 °F (33.3–39.4 °C) This is a process-to-completion step, and relies on carry-over of pre-bleach to initiate the bleach. The bleach converts metallic silver into silver bromide, which is converted to soluble silver compounds by the fixer. During bleaching, iron (III) EDTA is converted to iron (II) EDTA (Fe3+ EDTA + Ag + Br−→ Fe2+ EDTA + AgBr) before fixing. Kodak also has a process variant which uses a higher concentration of bleach and a 4:00 bath time; but with process volumes declining, this variant has become uneconomical.[5]
7 Wash step   (optional) Rinses off the bleach and extends the life of the fixer bath. This wash step is recommended for rotary tube, sink line and other low volume processing.[5]
8 Fixer bath Bath 6 4 92–103 °F (33.3–39.4 °C) This is a process-to-completion step.[5]
9 Second fixer stage   (optional) Using fresh fixer. The archival properties of film and paper are greatly improved using a second fixing stage in a reverse cascade.[12] Many C-41RA (rapid access) minilab processors also use 2 stage reverse cascade fixing for faster throughput.
10 Final wash   4 92–103 °F (33.3–39.4 °C) [5]
11 Final rinse   1 Ambient Up until the mid-1990s, the final rinse was called a stabilizer bath, since it contained formaldehyde. Currently, the final rinse uses a surfactant, and miconazole, an anti-fungal agent.[5]
12 Drying   var. <145 °F (63 °C) Drying in a dust-free environment.[5]

Three-bath process

[edit]

Tetenal nearly closed in 2019,[13] but was rescued through a management buyout,[14] and relaunched its online store in 2020, operating as Tetenal 1847 GmbH.[15] However, the chemical production part of Tetenal 1847 was spun off as Norderstedter Chemiewerke in 2022, which filed for bankruptcy in February 2023[16] and the three-bath process is no longer available.

Tetenal Colortec E-6[17]
Step Time (min:sec) Temp. Schematic Description
  1 First developer (FD) Bath 1 6:15 to 6:45 100 ± 0.5 °F (37.8 ± 0.3 °C) The first developer bath is a black & white film developer, which forms a negative silver image in each layer of the film. The first developer is time and temperature sensitive because it controls contrast. The amount of time depends on the quantity of developer solution and the number of films present. Exposures may be pushed by increasing the time in the first bath, pulled by reducing the time in the first bath, with an adjustment of approximately 25% for a one-step change.
2 Wash   2:30 100 ± 1 °F (37.8 ± 0.6 °C) Rinse with running water, change water after 30 seconds, or extend rinsing time if necessary.
3 Color developer (CD) Bath 2 6 to 8 100 ± 1 °F (37.8 ± 0.6 °C)
This bath combines the reversal / fogging bath, which chemically sensitizes silver halide left unsensitized during the exposure, with the color developer (dye formation) bath. When this step is complete, a positive silver image is formed with the chemically exposed silver halide. The metallic negative silver image formed in the first developer has no part in the reaction of this step. As the color development progresses, a metallic positive silver image is formed and the color developing agent is oxidized. Oxidized color developer molecules react with the color couplers and color dyes are formed in each of the three layers of the film. Each layer of the film contains a specific, complementary (subtractive color) dye coupler; for example, the blue-sensitive layer forms a yellow (minus-blue) image.
  4 Wash   2:30 97 ± 5 °F (36.1 ± 2.8 °C) Rinse with running water, change water after 30 seconds, or extend rinsing time if necessary.
5 Bleach & fix (BX) Bath 3 6 to 8 97 ± 5 °F (36.1 ± 2.8 °C) Bleach converts metallic silver into silver bromide, which is converted to soluble silver compounds by the fixer.
6 Wash   4 97 ± 5 °F (36.1 ± 2.8 °C) Rinse with running water, change water after 30 seconds, or extend rinsing time if necessary.
7 Stabilizer   1 68–77 °F (20.0–25.0 °C) The film is taken out of the tank for the finishing stabilizer step.

See also

[edit]

References

[edit]
  1. ^ Bunting, Roger K. (1987). The Chemistry of Photography (2nd ed.). Normal, IL: Photoglass Press. p. 126. ISBN 0-9616724-0-4.
  2. ^ Schwalberg, Bob (May 1984). "Nine New Color Films". Popular Photography. p. 174. Retrieved 6 September 2023.
  3. ^ Schwalberg, Bob (July 1984). "Battle of the Chrome Speed Champs". Popular Photography. pp. 56–59. Retrieved 6 September 2023.
  4. ^ "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 1: Processing solutions and their effects" (PDF). Kodak. Archived from the original (PDF) on August 25, 2005.
  5. ^ a b c d e f g h i j k l m "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119". Kodak. Archived from the original on October 8, 1999. Retrieved 2007-07-04.
  6. ^ a b c d "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 6: Continuous Processors" (PDF). Kodak. Archived from the original (PDF) on October 15, 2008.
  7. ^ "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 7: Roller-Transport Processors" (PDF). Kodak. Archived from the original (PDF) on August 30, 2008.
  8. ^ "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 8: Rack-and-Tank Processors" (PDF). Kodak. Archived from the original (PDF) on September 5, 2008.
  9. ^ a b c d "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 9: Batch Processing" (PDF). Kodak. Archived from the original (PDF) on September 1, 2000.
  10. ^ "Process E-6 Using KODAK Chemicals, Process E-6 Publication Z-119 | Chapter 10: Rotary-Tube Processors" (PDF). Kodak. Archived from the original (PDF) on February 5, 2005.
  11. ^ "KODAK PROFESSIONAL EKTACHROME Films E100G and E100GX". Kodak. Retrieved 2007-07-04.
  12. ^ Schwartz, Dan (March 8, 2004). "Why two step fixing is a Really Good Thing". Photo.net. Archived from the original on June 24, 2007. Retrieved 2007-07-04. Note this Photo.Net discussion thread reprints the technical paper Post Development Processing by Dr. Michael J. Gudzinowicz (1998).
  13. ^ Zhang, Michael (January 30, 2019). "Photo Chemistry Giant Tetenal Closing Shop After 172 Years: Report". PetaPixel. Retrieved 29 August 2024.
  14. ^ Zhang, Michael (February 19, 2019). "Tetenal Film Chemistry to Live On: Management Buyout Accepted". PetaPixel. Retrieved 29 August 2024.
  15. ^ Cartwright, Mason (September 16, 2020). "TETENAL is Back: 173-Year-Old Photo Chemistry Brand Launches New Store". PetaPixel. Retrieved 29 August 2024.
  16. ^ El Mozayen, Marwan; Schuler, Charys; Waldeck, Andreas (September 25, 2023). "The State of the Photochemical Industry in 2023". SilvergrainClassics. Retrieved 29 August 2024.
  17. ^ "Colortec E-6 3-Bath" (PDF). Tetenal. Archived from the original (PDF) on August 12, 2021.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=E-6_process&oldid=1243027238"
pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy