Jump to content

List of weapons in the American Civil War

Page semi-protected
From Wikipedia, the free encyclopedia

Muzzleloaders dominated the battlefields of the Civil War, being used by both sides in hundreds of thousands. The bayonets attached to the guns were an important force multiplier during the war
Muzzleloaders dominated the battlefields of the Civil War, being used by both sides in hundreds of thousands. The bayonets attached to the guns were an important force multiplier during the war

There were a wide variety of weapons used during the American Civil War, especially in the early days as both the Union and Confederate armies struggled to arm their rapidly-expanding forces. Everything from antique flintlock firearms to early examples of machine guns and sniper rifles saw use to one extent or the other. However, the most common weapon to be used by Northern and Southern soldiers was the rifled musket. Born from the development of the percussion cap and the Minié ball, rifled muskets had much greater range than smoothbore muskets while being easier to load than previous rifles.[1]

Most firearms were muzzleloaders which were armed by pouring the gunpowder and bullet down the muzzle. While they only fired once before needing to be reloaded, a trained soldier could achieve a rate of fire of three rounds per minute. Newer breechloaders were easier and quicker to reload, but perhaps the most revolutionary development were repeating firearms, which could fire multiple times before reloading. However, for a number of reasons, repeating firearms did not see widespread use.[2]

The diversity of long guns in the war led to a classification system which categorized them by their quality and effectiveness. There were "first class" weapons like Springfield rifles, "second class" weapons like the older M1841 Mississippi rifle, and "third class" weapons like the Springfield Model 1842 musket. Efforts were made to ensure that troops had the best possible firearms available, including rearming with captured enemy weapons after a battle.[3]

Personal weapons

Edged weapons

The most common edged weapon carried by both sides was the bayonet given to infantry soldiers. Beyond its use as a weapon, the bayonet had utilitarian purposes, such as a makeshift entrenching tool and even a spit. Infantry sergeants and officers were also equipped with a sword.[1] Sabers were the traditional weapon of the cavalry, although Union cavalry tended to place greater emphasis on their use in combat over the Confederates.[4] Another traditional cavalry weapon, the lance, was very rare: the 6th Pennsylvania Cavalry Regiment was one of the only units to carry them, and they eventually discarded their lances in May 1863.[5]

One weapon which saw an unexpected revival during the Civil War was the pike. The Confederacy in particular suffered from a shortage of modern weapons, and by 1862 prominent military leaders like Robert E. Lee and Stonewall Jackson advocated the manufacture and distribution of pikes as a stopgap measure. Joseph E. Brown, governor of Georgia, was the strongest proponent of pikes and procured thousands of them for local state militia. Such weapons were primarily given to home guard units until they could be rearmed with guns.[6][7]

Model Notes for the subject
Arkansas toothpick Could be used as a sword in combat.[8]
Bayonet Attached to rifles and muskets.
Bowie knife Often carried by Confederates instead of bayonets.
M1832 foot artillery sword Issued to artillerymen. Based on the Roman gladius.
M1833 dragoon saber Issued to the US Cavalry. An engraved version was privately purchased by senior officers.
M1840 army noncommissioned officer's sword Issued to infantry sergeants.
M1840 cavalry saber Issued to Union cavalry.
M1840 light artillery saber Issued to mounted artillery.
M1850 army staff & field officer's sword Regulation officer's sword, though in practice most officers used cavalry sabers. Southern officers sometimes carried ancestral blades from the American Revolutionary War or even from the War of 1812.
M1852 naval officer's sword
M1860 cutlass Issued to naval boarding parties. Sailors also had access to harpoons, axes and grappling hooks.
M1860 light cavalry saber Issued to Union cavalry.
Mameluke sword Carried by Marine officers.
USMC noncommissioned officer's sword

Sidearms

Many different pistols and revolvers were used in the Civil War, although the most common were cap and ball revolvers with five or six chambers. The most popular revolvers were those produced by Colt, with over 146,000 purchased by the US government. The bullet and gunpowder could be packaged together as a paper cartridges or loaded separately into each chamber. Some models also came with a shoulder stock.[9]

Revolvers were the standard sidearm of infantry officers; many soldiers also brought with them handguns when they first volunteered, but these were often discarded. Nearly all cavalry soldiers carried at least one handgun but more frequently two. John Mosby's rangers were famous for carrying four revolvers, with the additional pair held in saddle holsters.[9][10]

Model Notes
Adams M1851 revolver A double-action only revolver and predecessor to the Beaumont–Adams M1862.
Allen & Thurber M1837 revolver pepperbox With the shortage of pistols in the American Civil War, many soldiers on both sides carried these as a backup arm.
Allen & Wheelock M1861 revolver
Beaumont–Adams M1862 revolver Imported by both the Union and the Confederacy.
Butterfield M1855 transitional revolver A transitional revolver with tape primer invented in 1855 by Jesse Butterfield of Philadelphia. Two thousand were ordered by the US Army, but production was canceled in 1862.[11]
Colt M1836 Paterson revolver The first true revolver produced by Colt in 1836.
Colt M1847 Walker revolver Issued to the US Cavalry. A heavy .44 caliber revolver invented during the Mexican War and designed for killing the mounts of charging enemy troopers.[12]
Colt M1848 Dragoon revolver A .44 caliber revolver that was developed from the Colt M1847 Walker.
Colt M1849 Pocket revolver A popular revolver that was never officially issued but was often bought privately.
Colt M1851 Navy revolver Colt's most popular revolver for the 1850s civilian market in .36 caliber. The name 'Navy' came from the cylinder of the revolvers being engraved with a scene of the victory of the Second Texas Navy at the Battle of Campeche on May 16, 1843. The preferred sidearm of the Confederacy. Copies such as the Griswold & Gunnison were made all over the South.
Colt M1860 Army revolver A .44 caliber revolver made for the US Cavalry to replace the heavier Colt M1848 Dragoon. The Bessemer steel process invented in the 1850s made a lighter stronger revolver in .44 caliber possible.
Colt M1861 Navy revolver Updated version of the .36 caliber Colt M1851 Navy with lines similar to the Colt M1860 Army.
Colt M1862 Police revolver The .36 caliber Colt M1862 originally made for the New York Metropolitan Police Department.
Colt Root M1855 revolver The first of Colt's revolvers to use a "creeping" loading lever mechanism.
Deringer M1825 Philadelphia caplock pistol
Elgin M1838 cutlass caplock pistol Issued to navy personnel but proved unpopular and was quickly replaced with the M1860 cutlass.
Harpers Ferry M1836 pistol A single shot horse pistol predominantly used by the Confederacy.
Kerr M1855 revolver A five shot back-action revolver made by the London Armoury Company was used by Confederate cavalry.
Lefaucheux M1854 revolver A pinfire revolver imported from France by Union and Confederate officers.
Lefaucheux M1858 revolver
LeMat M1856 revolver Perhaps the most well known foreign designed revolver during the Civil War. It had two barrels, a .42 caliber barrel on top and a 20 gauge shotgun barrel underneath. The creator, a French doctor living in New Orleans, Jean Alexandre LeMat, moved back to France to create more revolvers for the Confederacy. The French made revolvers, however, proved unreliable and difficult to manufacture.
Moore M1864 revolver A seven shot revolver firing the .32 teat-fire cartridge.
Remington M1858 revolver Colt's chief competitor, the Remington Repeating Arms Company, also made revolvers during the Civil War. The most common was the Remington M1858 New Army in .44 caliber. The .36 caliber version referred to as the Remington M1858 New Navy.
Remington M1860 Elliot revolver pepperbox
Savage-North M1861 Navy revolver A proto double-action revolver with a second trigger underneath the first. Used by the Navy and a few Army regiments.
Smith & Wesson Model 1 Used as an alternative to the Colt and Remington revolvers. These usually fired brass rimfire cartridges.
Smith & Wesson Model No. 2 Army A larger version of the Smith & Wesson Model 1 chambered in .32 caliber rimfire.
Spiller & Burr M1861 revolver A cheaper version of the Whitney M1857 with a frame made from gunmetal (bronze) instead of iron and the steel in the cylinder was replaced with twisted iron. The muzzle was also rounded instead of having sharp edges.[13]
Starr M1858 and M1863 revolver A double-action revolver which was briefly used in the western theater of the war, until the U.S. Ordnance Department persuaded Starr Arms Co. to create a single-action variant after the discontinuation of the Colt revolver. The company eventually complied, and the Union acquired 25,000 of the single-action revolvers for $12 each.
Tranter M1856 revolver The first model also had a proto double-action with a second trigger underneath the first. But in a later model this was reduced to a single trigger that could work with both single-action and double-action.
Volcanic M1855 repeating pistol A lever-action repeating pistol made in 1855 and chambered in .44 rimfire. Privately owned by those who could afford them.
Walch M1859 revolver A very rare 12 shot revolver. Fewer than 200 were made.
Wesson and Leavitt M1850 Dragoon revolver A large single-action revolver in .40 caliber.
Whitney M1857 revolver First produced in 1857, this .36 caliber percussion revolver was the first to be produced with a solid frame, which meant that it was much sturdier than the traditional Colt revolver.

Carbines

Carbines were the preferred long gun for cavalry as they were smaller, lighter and more robust than infantry rifles. While accuracy was comparable, their range was lower on account of their shorter barrels and lighter gunpower loads. Early models had been muzzleloaders, but because of the difficulty reloading them on horseback, the majority during the war were breechloaders employing linen cartridges. The largest number of these was the Sharps carbine, which was also available as a rifle.[2][14]

As the war progressed, increasing numbers of Federal cavalrymen were armed with repeating carbines. The most widespread of these was the Spencer carbine, which was adopted as the Union cavalry's official carbine in 1864.[15] However, since the South was incapable of producing the metallic cartridges necessary for their function, Confederate troopers were severely limited in their use of repeating firearms.[2][14] As late as 1863, the British officer Arthur Lyon Fremantle observed Confederate cavalry in Texas armed with a wide variety of weapons: rifles, shotguns, carbines and revolvers.[16]

Model Notes
Burnside M1855 carbine A breech-loader invented by Ambrose Burnside and issued to the US Cavalry.
Colt revolver carbine The Colt M1855 was an early repeater that was not favored by the troops because it tended to discharge all of its cartridges at the same time.
Enfield P1861 musketoon
Gallager M1861 carbine A single-shot breech-loading carbine with 17,782 sold to the US Army.
Henry repeating rifle The Civil War precursor to the Winchester repeating rifle based on early lever-action repeating rifles made by New Haven Arms Company Co. These highly prized weapons were privately purchased by those who could afford them.
Jenks M1841 Mule ear carbine All of these carbines were manufactured for the Navy and the U.S. Revenue Cutter Service.[citation needed]
Joslyn carbine The Joslyn was made in both percussion and rimfire configuration.
Maynard M1851 carbine
Merrill M1858 carbine
Remington M1865 split breech carbine Issued in limited numbers to Union cavalry in the final year of the war.
Sharps carbine The Sharps carbine was a falling-block firearm used during and after the American Civil War. The carbine version was very popular with the cavalry of both the Union and Confederate armies and was issued in much larger numbers than the full-length rifle.
Sharps & Hankins M1862 carbine Carbines manufactured for the navy that were made with a protective leather barrel cover.
Smith carbine Patented by Gilbert Smith in 1857.
Spencer repeating carbine The Spencer M1860 was a manually operated lever-action repeating carbine fed from a tube magazine with cartridges. A shorter and lighter version of the Spencer rifle, it was adopted by the Union Army's cavalry in 1864.
Springfield M1847 musketoon
Starr carbine
Tarpley carbine A Southern breech-loader which was not widely produced due to mechanical flaws.
Wesson carbine The Wesson M1859 was a breech-loading, metallic rimfire cartridge rifle used during the American Civil War and the Indian Wars. The carbine was used by US Cavalry, typically purchased by state governments or individuals.

Rifles and muskets

Over 100 types of muskets, rifles, and rifled muskets were used in the Civil War, though the two most common were the Springfield Model 1861 and Pattern 1853 Enfield. Rifled muskets had a significantly longer range than the older smoothbore types, but their accuracy at these distances was limited: gunpowder created billowing clouds of obscuring smoke and the bullet's high trajectory required accurately estimating the distance to the target, a difficult proposition for an untrained shooter.[1][2]

Some soldiers preferred to stick with smoothbore muskets as it allowed them to fire buck and ball shots. The combination of a bullet with several buckshot was devastating at short distance, but rifled firearms could not use them as they damaged the spiral groves. Thus, even as rifled muskets became more available, some regiments kept their smoothbores; the 12th New Jersey for example carried theirs for the duration of the war.[17]

Although breechloading and repeating rifles were available as early as 1861, few were issued for reasons such as cost, technical complexity, and institutional resistance. This did not stop some individuals from purchasing these weapons themselves.[1][2] One of the most famous examples of this was the Lightning Brigade, whose wealthy commander, Colonel John T. Wilder, purchased Spencer repeating rifles for the entire formation.[18]

Model Notes
Augustin M1842 musket The Augustin was an Austrian musket that featured in the U.S. Civil War in very small numbers.
Ballard M1861 rifle
Brunswick rifle A British percussion rifle imported in small numbers by the Confederacy.
Charleville musket French muskets converted to percussion cap from flintlock and used in small numbers.
Colt revolver rifle The Colt was an early repeater that was not favored by the troops because it tended to discharge all of its cartridges at the same time.
Deringer M1814 Common rifle
Deringer M1817 Common rifle
Pattern 1853 Enfield The Enfield rifle was used by both the North and the South in the American Civil War and was the second most widely used infantry weapon in the war.
Fayetteville rifle
Hall rifle A single-shot breech-loader invented in 1811. A few were used by the Confederacy.
Harper Ferry M1803 rifle
Hawken rifle A frontier rifle used by Confederate sharpshooters.
Henry M1860 repeating rifle The Civil War precursor to the Winchester repeating rifle based on early lever-action repeating rifles made by New Haven Arms Company Co. These highly prized weapons were privately purchased by those who could afford them.
Joslyn rifle The Joslyn was made in both percussion and rimfire configuration.
Lorenz rifle This Austrian firearm was the third most common rifled musket and imported by both sides. Many were modified to fire the same .58 caliber Minié ball as the Enfield and Springfield rifled muskets.
Mississippi M1841 rifle A 2 band rifle with a sword bayonet which was issued to Confederate NCOs.
Brown Bess musket A caplock conversion of older flintlock muskets imported by the Confederacy.
Potzdam musket Prussian caplock muskets converted from flintlock and imported during the conflict.
Richmond rifled musket A Confederate copy of the Springfield M1855 without Maynard tape primer.
Sharps rifle The Sharps rifle was a falling-block rifle used during and after the American Civil War. It was particularly associated with the 1st and 2nd United States Sharpshooters
Spencer repeating rifle The Spencer M1860 was a manually operated lever-action repeating rifle fed from a tube magazine with cartridges. Fewer of these were issued compared to the carbine variant.
Springfield M1795 musket The first .69 caliber smoothbore flintlock musket made in the US for the military.
Springfield M1812 musket
Springfield M1816 musket Many of these old flintlock muskets were converted to the percussion system and some of the barrels were even rifled to accept the Minié ball. The quality of these conversions varies from manufacturer.
Springfield M1822 musket
Springfield M1835 musket
Springfield M1840 musket The last flintlock musket manufactured for the US military. Most were converted to percussion and rifled.
Springfield M1842 musket The first musket produced with a percussion lock and last .69 caliber smoothbore. A large number were rifled prior to the start of the war.
Springfield M1855 rifled musket First standard issue rifled musket and in .58 caliber. Used both the Maynard tape primer system and the Minié ball.
Springfield M1861 rifled musket Most widely used rifled musket of the civil war. Main feature was the elimination of the Maynard tape primer from the earlier Springfield M1855.
Springfield M1863 rifled musket A slightly modified version of the Springfield M1861.
Volcanic M1855 repeating rifle Used the same system as the Volcanic M1855 repeating pistol but with the exception of having a longer barrel, magazine, a larger lever loop and a stock. The repeating rifle was never issued but was bought privately.
Wesson M1859 rifle The Wesson M1859 was a breech-loading, metallic rimfire cartridge rifle used during the American Civil War and the Indian Wars.
Whitworth rifle The world's first sniper rifle, it was used particularly by the Confederate Whitworth Sharpshooters.

Grenades

Thousands of hand grenades were used by belligerents on both sides, although shortcomings in the weapons of the time kept them from seeing widespread use; primarily they were reserved for sieges or trench warfare. One of the most common were Ketchum grenades, of which the Union government purchased 90,000 in total. Others included the Adams grenade and the Haynes "Excelsior" percussion grenade. Many artillery shells were also converted into makeshift grenades and either thrown or rolled down onto the enemy.[1][19][20]

Land mines and sea mines

The American Civil War saw the use of land mines, sea mines, booby traps and improvised explosive devices, which were collectively referred to as "torpedoes." These weapons were primarily used by the Confederates, who established a Torpedo Bureau to oversee their production. Gabriel J. Rains, who ran the Torpedo Bureau, pioneered the use of explosive devices on land, while Matthew Fontaine Maury was responsible for developing the first sea mines.[21][20]

Although these explosive devices were effective, they were considered by officers on both sides to be cowardly, uncivilized weapons. Confederate general James Longstreet banned their used under his command, while Union general William T. Sherman hated them so much he reportedly ordered Confederate prisoners of war to march ahead of his troops to trigger any hidden explosives.[21][20]

Machine Guns

There were machine guns available during the Civil War but their impact was minimal as very few were fielded by either side. One reason for this was opposition to their adoption by the military establishment, but also important were drawbacks in these early weapons' design. The use of black powder meant obscuring smoke quickly formed after just a few firings. The weapons themselves were too heavy to be carried except on a carriage, which limited where they could move. Their ammunition also was heavier, making it more difficult to carry enough rounds for adequate use.[22]

Model Notes for the subject
Agar machine gun Nicknamed the "Coffee Mill" by Abraham Lincoln, the Agar fired a .58 caliber round from a single barrel. The rate of fire was kept at 120 rounds per minute to avoid overheating the barrel.[22][23]
Billinghurst Requa Battery A volley gun which had eight banks of cartridge chambers that were rotated into alignment behind the row of 25 barrels. A crew of three could fire seven volleys a minute, but its powder train was exposed to the elements.[22][23]
Confederate revolving cannon This breechloading cannon had a 2-inch bore and fired five rounds thanks to a revolving cylinder. At least one was used by the Confederates at the Siege of Petersburg and later captured by the Union.[23][24]
Claxton machine gun A double-barrel weapon invented by F.S. Claxton, son of naval officer Alexander Claxton. The Claxton was never adopted as it was considered too frail in construction.[24]
Gatling gun Arguably the most successful Civil War machine gun, the Gatling gun could sustain 150 rounds a minute thanks to its rotating barrel design. Although Chief of Ordnance James Wolfe Ripley was against its adoption, that did not stop individual generals like Benjamin Butler from purchasing them for their own use. Several were also used by the New York Times to defend their office during the New York City draft riots.[22][23]
Gorgas machine gun Invented by Josiah Gorgas, the Confederate Chief of Ordnance, this weapon also used a revolving cylinder to fire 18 rounds of 1.25-inch ammunition. Although it tested well it was not put into production before the war ended.[23][24]
Vandenburgh volley gun Invented by General Origen Vandenburgh, this volley gun was originally intended for service with the Union but they were rejected after testing. Vandenburgh later sold them to the Confederates, with at least one taking part in the Siege of Petersburg.[22][23]
Williams gun This Confederate "secret weapon" could fire 65 rounds per minute and was considered very reliable. The only exception was that its breach would expand after repeated firing and so cause the lock to not secure properly.[22][23]

Artillery

Artillery in action at the Battle of Beaver Dam Creek

Artillery during the Civil War was classified based on a variety of factors, such as weight, caliber, and mobility. The common types of artillery pieces were guns, which fired at long ranges along a flat trajectory; howitzers which were lighter and shorter, and fired a larger round with a light charge; and mortars which were very short and heavy, and fired a large projectile on a higher trajectory. A recent development was the gun-howitzer which combined aspects of a gun and howitzer into one weapon.[25][26]

Both smoothbore and rifled artillery pieces found widespread use during the war. Rifled guns had the distinct advantages of greater range and superior accuracy, while smoothbore pieces were more reliable and could achieve a greater rate of fire. This was due in part to smoothbore artillery using fixed ammunition, with the projectile and charge bound together, while rifled pieces used semi-fixed rounds where these were loaded separately. Guns could fire solid shot, shell, spherical case (shrapnel), and canister shot. Howitzers could fire all but solid shot, and mortars could only fire shell and spherical case.[25][27][28]

Bronze (sometimes erroneously referred to as brass) allowed for lightweight smoothbore artillery pieces. Some rifled artillery was also made of bronze but the rifling would erode too quickly. Instead, most rifled artillery was made of wrought iron, or cast iron reinforced with wrought iron bands. Heavyweight smoothbores were almost all wrought iron as well. Although steel was increasing in availability, it was still too expensive and too difficult to produce in large enough quantities to be used for artillery.[25][26]

Field artillery

Field artillery were cannons and howitzers light enough to be mounted on gun carriages and maneuvered around on the battlefield. Each piece was hooked up to a limber allowing it to be pulled by a team of six horses driven by three drivers. An accompanying caisson carried additional ammunition and was also pulled by a similar six-horse team. The cannoneers who operated each piece marched alongside the artillery when it was on the move but could ride on the limber and caisson if necessary. Horse artillery, also known as 'flying artillery,' differed in that every man was mounted on a horse.[27]

In 1841, the US Army had selected a field artillery system based on bronze smoothbore muzzleloaders: the M1841 6-pounder field gun, the M1841 12-pounder howitzer and 12-pounder gun, the M1841 mountain howitzer, the M1841 24-pounder howitzer and the M1844 32-pounder howitzer. The introduction of the M1857 12-pounder Napoleon represented a significant development as the gun-howitzer could replace several of the outdated pieces at once. The Napoleon, along with the 10-pounder Parrott rifle, the 20-pounder Parrott rifle, and the 3-inch ordnance rifle, came to constitute the vast majority of Union field artillery during the Civil War. The Confederates meanwhile had to make do with a wider variety of field artillery and went so far as to melt down outdated pieces so they could be recast as newer models.[25][26]

Comparison of common Civil War field artillery with the modern M119 howitzer

Heavy artillery

Heavy artillery during the Civil War consisted of siege artillery, garrison artillery, and coastal artillery. Siege and garrison artillery were larger versions of field artillery, mounted on heavyweight carriages which allowed them very limited mobility: the M1839 24-pounder smoothbore was the largest one which could still be moved by road. Siege artillery fired the same ammunition as field artillery with the addition of grapeshot, which by 1861 had been abandoned by field pieces. Coastal artillery was meant to be used from fixed positions and, as weight was not an issue, included some of the largest pieces of the war. Coastal artillery could also fire heated shot.[29][30]

While smoothbore siege artillery had been common previously, the superiority of rifled guns in destroying fortifications saw them dominate during the Civil War. Early examples of siege artillery include the 4.5-inch siege rifle and James rifles. These were joined by larger versions of Parrott rifles and Blakely rifles. Coastal artillery included massive columbiads like the Rodman gun.[29][30]

Siege and coastal mortars ranged from 8-inch models which could accompany an army's siege train to massive 13-inch monsters which had to be disassembled and carried by rail or ship to travel any distance. The Coehorn mortar however was a type of small mortar light enough to be carried by four men. This made it very useful for trench warfare and even during mobile battles like at Cold Harbor.[31]

The Dahlgren gun was the standard weapon of the United States Navy. These smoothbore guns were also referred to as "shellguns" as they were designed to fire massive exploding shells. Rifled artillery also found use on Navy ships, some of which were just identical versions of Army models while others were designed especially for naval use. The Confederate Navy was heavily reliant on British imports for their naval artillery, although they managed to manufacture some domestic models, which were used both at sea and on land.[32]

Although naval artillery was primarily mounted on and intended to destroy ships, it could play a role in land battles of the Civil War, including being brought ashore as occurred during the Siege of Vicksburg.[33] The 12-pounder Dahlgren in fact was designed to be used mounted on the bow of a small boat, then be transferred to a field carriage in a matter of minutes.

Types of Artillery during the Vicksburg Campaign
Type Model Bore
Dia
(in.)
Length
(in.)
Tube
wt.
(lbs)
Carriage
wt.
(lbs.)
Range
(yds)
/deg. elev
Field Artillery
Smoothbores
6-pounder Gun 3.67 65.6 884 900 1,513/5°
12-pounder
"Napoleon"
Gun
Howitzer
4.62 72.15 1,227 1.128 1,680/5°
12-pounder Howitzer 4.62 58.6 788 900 1,072/5°
24-pounder Howitzer 5.82 71.2 1,318 1,128 1,322/5°
Rifles
10-pounder Parrot 3.0 78 890 900 2,970/10°
3-inch Ordnance 3.0 73-3 820 900 2,788/10°
20-pounder Parrot 3.67 89.5 1,750 4,4011/15°
Siege and Garrison
Smoothbores
8-inch Howitzer 8.0 61.5 2,614 50.5 shell 2,280/12°30'
10-inch Mortar 10.0 28.0 1,852 87.5 shell 2,028/45°
12-pounder Gun 4.62 116.0 3,590 12.3 shot
24-pounder Gun 5.82 124.0 5,790 24.4 shot 1,901/5°
Rifles
18-pounder* Gun
(Rifled)
5-3 123.25
30-pounder Parrot 4.2 132.5 4,200 29.0 shell 6,700/25°
*The Confederate "Whistling Dick," an obsolete smoothbore siege gun, rifled and banded.
Seacoast Artillery
Smoothbore
8-inch Columbiad 8.0 124 9,240 65 shot 4,812/27°30'
9-inch* Dahlgren 9.0
10-inch Columbiad 10-0 126 15,400 128 shot 5,654/39° 15'
11-inch Dahlgren 11-0 161 15,700 3,650/20'
32-pounder Gun 6-4 125-7 7,200 32-6 shot 1,922/5°
42-pounder Gun 7-0 129 8,465 42.7 shot 1,955/5°
Rifles
6.4-inch Brooke 6.4 144 9,120
7-inch Brooke 7-0 147.5 14,800
7.5. inch** Blakely 7.5 100
100-pounder Parrott 6-4 155 9,700 100 shot 2,247/5°
*A Confederate produced copy of Dahlgren's basic design.
**The famous Confederate "Widow Blakely," probably a British 42-pounder smoothbore shortened, banded, and rifled.
Naval Artillery
Type Model Bore
Dia
(in.)
Length
(in.)
Tube
wt.
(lbs)
Projectile
wt.
(lbs.)
Range
(yds)
/deg. elev
Smoothbores
8- inch Dahlgren 8 115.5 6,500 51 shell 1,657/5°
9-inch Dahlgren 9 131.5 9,000 72-5 shell 1,710/5°
11-inch Dahlgren 11 161 15,700 136 shell 1,712/5°
12-pounder Howitzer 4.62 63.5 760 10 hell 1,08515°
24-pounder Howitzer 5.82 67 1,310 20 shell 1,270/5°
32-pounder Gun 6-4 108 4,704 32 shot 1,756/5°
64-pounder Gun 8 140.95 11,872
Rifles
30- pounder Parrott 4.2 112 3,550 29 shell 2,200/5º
42-pounder** Gun(rifled) 7 121 7,870 42 shot
50-pounder Dahlgren 5.1 107 6,000 50 shot
100-pounder Patron 6.4 155 9,700 100 shot 2,200/5°
Mortars
13-inch Mortar 13 54.5 17,120 200 bell 4,200/45°
Some naval guns served ashore as siege artillery. Moreover, many guns mounted on the boats of the Mississippi River Squadron were in fact Army field artillery and siege guns.
**Converted smoothbore

Special weapons

Vehicles

Animals

Carriages

Trains

Ships

Submarines

Aircraft

Air balloons

Airships

See also

References

  1. ^ a b c d e Coggins (1983), p. 26-32
  2. ^ a b c d e King-Robertson-Clay, pp. 11–14.
  3. ^ Gabel, pp. 32–34.
  4. ^ Coggins (1983), p. 49
  5. ^ Coggins (1983), p. 56
  6. ^ Broadwater (2014), "The Pikemen"
  7. ^ "Georgia Governor Joseph Brown Addresses the Mechanics". Retrieved 2014-04-20.
  8. ^ "Introduction to Arkansas". Retrieved 2007-06-19.
  9. ^ a b Coggins (1983), p. 40-41
  10. ^ Coggins (1983), p. 54
  11. ^ "NRA Museums". www.nramuseum.org.
  12. ^ Ricketts, H, Firearms (London, 1964)
  13. ^ "Dixie Gun Works Spiller & Burr .36 Caliber Revolver". Guns of the Old West. No. Summer 2014. May 16, 2014. Retrieved August 22, 2017.
  14. ^ a b Coggins (1983), p. 54, 58
  15. ^ Starr, S. Z. (1979). The Union Cavalry in the Civil War: The War in the East from Gettysburg to Appomattox, 1863--1865. United Kingdom: LSU Press. p. 68-71
  16. ^ Fremantle, Lieut.-Col Sir Arthur James (1864). Three Months in the Southern States: April–June 1863. Mobile, Alabama: S.H. Goetzel. pp. 36, 39.
  17. ^ Hess, Earl J. (2016). The Rifle Musket in Civil War Combat: Reality and Myth. University Press of Kansas. p. 58-59
  18. ^ Hess, Earl J. (2016), p. 54
  19. ^ Coggins (1983), p. 97-98
  20. ^ a b c d e f g h Andrews 2018
  21. ^ a b Rutherford (2020), "Introduction"
  22. ^ a b c d e f Coggins (1983), p. 43-45
  23. ^ a b c d e f g Broadwater (2014), "The Machine Gunners"
  24. ^ a b c Chinn, George M. (1951). The machine gun: Part II manually operated machine guns. Washington, D.C.: Bureau of Ordnance, Department of the Navy.
  25. ^ a b c d King-Robertson-Clay, pp. 15–16.
  26. ^ a b c Coggins (1983), p. 61-63
  27. ^ a b Coggins (1983), p. 63-65
  28. ^ Coggins (1983), p. 76
  29. ^ a b Gabel, p. 27–29.
  30. ^ a b Coggins (1983), p. 86-88
  31. ^ Coggins (1983), p. 96
  32. ^ Gabel, pp. 28–29.
  33. ^ Gabel, p. 32-34

Bibliography


pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy