OpenEVSE
 | This article contains promotional content. (December 2023) |
OpenEVSE (Electric Vehicle Supply Equipment) is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.[1] The charger is composed of open-source software[2] and hardware which can be made by individuals.[3]
The project started in February 2011,[4][1] with an experiment aimed at generating the SAE J1772 pilot signal[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU. Subsequent experiments continued until a prototype J1772-compatible controller was created. As of now, OpenEVSE powers charging stations all over the world.[6]
References
[edit]- ^ a b OpenEVSE About page
- ^ OpenEVSE at github
- ^ Software and hardware needed to build the OpenEVSE charger
- ^ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.
- ^ "openEVSE - openalia". Retrieved 2019-05-01.
- ^ "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. 2019-03-06. Retrieved 11 Jun 2024.
External links
[edit]
 | This article about an automotive part or component is a stub. You can help Wikipedia by expanding it. |