Jump to content

Rail transport in South Australia

From Wikipedia, the free encyclopedia

Railways of South Australia
Overview
LocaleSouth Australia, Australia
Dates of operation1854–present
Technical
Track gauge1600 mm (5 ft 3 in) broad gauge,
1435 mm (4 ft 8+12 in) standard gauge,
1067 mm (3 ft 6 in) narrow gauge
Pacific National freight passing Belair in the Adelaide Hills
FreightLink Adelaide to Darwin freight train at Dry Creek
The Adelaide–Sydney "Indian Pacific" train heading north from Adelaide in the suburb of Ovingham, headed by locomotive NR120, in 2005

Rail transport in the Australian state of South Australia is provided by a number of railway operators who operate over the government-owned railway lines. The network consists of 1435 mm (4 ft 8+12 in) standard gauge links to other states, the 1600 mm (5 ft 3 in) broad gauge suburban railways in Adelaide, a freight-only branch from Dry Creek to Port Adelaide and Pelican Point, a narrow-gauge gypsum haulage line on the Eyre Peninsula, and both copper–gold concentrate and coal on the standard-gauge line in the Adelaide–Darwin rail corridor north of Tarcoola.

The Australian Rail Track Corporation (ARTC), an agency of the federal government, owns standard gauge interstate lines heading north and south, together with the dual gauge freight-only branch from Dry Creek to Port Adelaide and Pelican Point. The ARTC lines bypass the city to the west and do not enter the CBD. The ARTC network extends from Adelaide towards Melbourne, Sydney, Perth and Darwin and is used by substantial interstate freight traffic. Journey Beyond is a private company operating long-distance interstate passenger trains from the Adelaide Parklands Terminal, just west of the CBD, on the ARTC's standard gauge lines.

South Australia no longer has regional freight and passenger services as with other states. The last broad-gauge freight service was the limestone train from Penrice, which operated from 1950 until it abruptly ceased in June 2014.[1]

History

[edit]

The first railway in colonial South Australia was the horse-drawn tramway from Goolwa to Port Elliot opened in 1854, providing a rail link from the port of Goolwa on the Murray River to an ocean harbour at Port Elliot. It was later extended to a safer harbour at Victor Harbor. This line was used to move freight between the shallow-draft vessels navigating the Murray, and coastal and ocean-going vessels, without either having to traverse the narrow and shallow mouth of the river with unpredictable currents.

The first of the railways in Adelaide was built in 1856 between the city and the port. The Adelaide railways were all built as broad gauge of 1600 mm (5 ft 3 in). Gradually, a network of lines spread out from Adelaide. These were initially built to carry ore, particularly copper, then later freight from the River Murray, and grain from the broadacre lands. In the first half of the 20th century, most of these lines carried passengers as well as freight, sometimes in mixed trains.

The main line to Melbourne was opened after a bridge was built at Murray Bridge in 1886. It was the first railway line between colony capitals to not have a break-of-gauge. It was also the last of these to be converted to standard gauge in 1995.

The rail network reached a peak by the 1940s and 50s but steadily declined, as branch and cross country lines were closed until the 2010s.[2]

Gauge

[edit]

In 1847, the Parliament of South Australia passed an act confirming adoption of the newly termed "standard gauge" (originally "Stephenson gauge") of 1435 mm (4 ft 8+12 in) – the first Australian colony to do so.[3] In 1848 the Colonial Secretary in London, Lord Grey, recommended all the Australian colonies adopt that gauge. However, the company building the first railway in New South Wales decided to adopt the "Irish" broad gauge gauge of 1600 mm (5 ft 3 in). Soon afterwards, Victoria and South Australia ordered locomotives and rolling stock to the wider gauge. New South Wales changed back to preferring standard gauge, but it was too late for Victoria and South Australia to change yet again. Thus began Australia's "mixed gauge muddle", which persists to this day.[4][5]

The first main line railway in Adelaide was built in 1856 between the city and the port. The main line to Melbourne was opened after a bridge was built at Murray Bridge in 1886. It was the first railway line between Australian capital cities not to have a break-of-gauge – but it was to be 109 years before it was converted to standard gauge in 1995, the last inter-capital line to be converted.

Narrow gauge

[edit]

Influenced by Queensland Railways' successful adoption of the narrow gauge for cost reasons (opened 1865), and influenced by the advocacy of people such as Abraham Fitzgibbon, South Australia changed the gauge[ambiguous] of the Port Wakefield line in the middle of construction. The Port Wakefield line, opened 1870, was originally horse drawn.

Because the narrow gauge lines of 1067 mm (3 ft 6 in) started out as isolated lines from independent ports at Port Wakefield, Port Pirie, Port Augusta, Port Lincoln, Port Broughton, Beachport, Kingston SE and Wallaroo, and a private tramway from Whyalla, the problems of the nascent break of gauge was not immediately apparent. When the broad and narrow systems finally met at Hamley Bridge, Terowie, Wolseley and Mount Gambier endless complaints started. There may have been even more breaks of gauge, as the original bridge at Murray Bridge was designed for narrow gauge.[6][7]

The horse-drawn narrow gauge Port Broughton railway line on the Yorke Peninsula was never connected to the main system.

The lines on the Eyre Peninsula Railway and throughout the mid-north were built to 1067 mm (3 ft 6 in) narrow gauge. Once the narrow gauge from Port Pirie to Broken Hill was converted to standard gauge, the narrow gauge from Terowie was converted to broad gauge to Peterborough. Peterborough became the change of gauge station for Broken Hill Adelaide express. The narrow gauge line was retained north from Peterborough to Quorn.

The main interstate links from Adelaide to Perth, Darwin, Melbourne, and Sydney are all of 1435 mm (4 ft 8+12 in) standard gauge.

Operators

[edit]

The country railways were initially owned by South Australian Railways. The narrow gauge lines north and west of Quorn were handed over to the Commonwealth Railways in 1926, though the Commonwealth had had financial responsibility for these lines since 1911. The Commonwealth Railways later merged with the SAR to become the Australian National Railways Commission in 1978.

The metropolitan railway lines are now owned and operated by Adelaide Metro, interstate passenger services operated by Journey Beyond, intrastate freight by Aurizon, and interstate freight by a number of companies including Bowmans Rail, Aurizon, Pacific National and SCT Logistics.

Passenger services

[edit]
TransAdelaide 3000 class railcar as used on Adelaide's non-electric suburban services
The Indian Pacific from Adelaide to Sydney near Hawker Street, Bowden

In the Adelaide Metro suburban network, there are 89 stations on seven lines. Vehicles are diesel-powered railcars and, following electrification of the Gawler, Seaford and Flinders lines, electric multiple-unit trains.

Country passenger services were discontinued in 1990; today the only services beyond suburban Adelaide are long-distance experiential tourism trains operated by Journey BeyondThe Ghan from Adelaide to Darwin, the Indian Pacific between Perth and Sydney, and the summer-months Great Southern between Adelaide and Brisbane via Adelaide The Overland between Adelaide and Melbourne, ,.

Railway preservation

[edit]

Port Adelaide is home to the National Railway Museum, the largest undercover railway museum in Australia. The SteamRanger Heritage Railway in the Adelaide Hills has restored a number of steam and diesel locomotives for tourist services on the Victor Harbor railway line, operating between Mount Barker and Victor Harbor. The Pichi Richi Railway Preservation Society based in Quorn operates on part of the former Central Australia Railway. The Steamtown Heritage Rail Centre is a static railway museum based in the former railway workshops in Peterborough.

Other former heritage operations have operated including the Lions Club of YP Rail (WallarooKadina), Limestone Coast Railway (on the Mount Gambier railway line from Mount Gambier railway station), Cobdogla Steam Friends, Steamtown Peterborough Railway Preservation Society (PeterboroughEurelia) and the Australian Society of Section Car Operators (accreditation in SA surrendered in 2010).

Timeline

[edit]

The first South Australian steam-operated line was built as a broad gauge (5 ft 3 in (1,600 mm)) line in 1856 between the city and Port Adelaide stopping at Bowden, Woodville and Alberton. This line is now part of the Adelaide suburban network and has been proposed for standardisation and conversion to light rail. It was extended as the Outer Harbor line to Outer Harbor in 1908. A branch was built to Grange in 1882. It was extended as the Henley Beach line to Henley Beach in 1894 and closed in 1957.

Development of the lines

[edit]
Map of railways extant and proposed in 1910 in South Australia

Southern Lines

[edit]

The South Line, through the Adelaide Hills, was opened to Aldgate, Nairne in 1883, Murray Bridge in 1884 and Bordertown and Serviceton, Victoria, connecting with Victorian Railways in 1887. This line was standardised in 1995.

A branch line was built to Marino in 1913, and extended to Willunga in 1915. The section from Hallett Cove to Willunga was closed in 1969. In the 1970s the line was extended south from Hallett Cove, becoming what is now the Adelaide Metro Seaford railway line. It reached Christie Downs in 1976, Noarlunga Centre in 1978, with a further extension to Seaford in 2014.

The beginning of the Victor Harbour line was a horse-drawn 1600 mm (5 ft 3 in) broad-gauge railway built from the port of Goolwa on the Murray River to an ocean harbour at Port Elliot in 1854. This line was used to move freight between the shallow-draft vessels navigating the Murray, and coastal and ocean-going vessels, without either having to traverse the narrow and shallow mouth of the river with unpredictable currents. It was later extended from Port Elliot to Victor Harbor in 1864 and from Goolwa to Strathalbyn in 1869. It was extended to Mount Barker Junction on the South Line in 1884 and strengthened to carry steam trains.

A branch from the South Line between the Mount Lofty Ranges and Murray River was built to Monarto and Cambrai in 1886. It was shortened to Apamurra near Palmer before being converted then closed briefly due to the standardisation of the Adelaide – Melbourne line in 1995. The line was then converted to standard gauge later in 1995 until it then closed again in 2005. [citation needed]

In the Murray Mallee, the Pinnaroo line was built from Tailem Bend to Pinnaroo in 1906. This was connected with the Victorian Railways at the Victorian border and Ouyen by 1915. The South Australian part of this line was converted to standard gauge in 1998 to reconnect it with the Adelaide – Melbourne line. This created a break-of-gauge at Pinnaroo. The last traffic on the line was transporting grain from silos to Port Adelaide. Viterra announced that no more grain would be carried by rail on this line after 31 July 2015, with the 2015 harvest to be entirely transported by road.[9]

The Barmera railway line opened from Tailem Bend through Karoonda to Wanbi on 6 January 1913, extended to Paruna on 1 May and Meribah on 7 May 1913 (both in the Brown's Well district).[10] While this line was still being built, the Government of South Australia approved several spur lines from it to open up more than a million acres of farmland. These were:[11][12]

  • Waikerie railway line Karoonda north to Waikerie (opened December 1914)[13]closed 14 March 1990 to Galga, 4 March 1994 to Karoonda[12]
  • Alawoona north to Loxton (opened February 1914)[13] closed 2015[9]
  • Brown's Well north to Paringa (opened October 1913),[13] closed to Alawoona December 1990 then Tailem Bend August 2015
  • The Peebinga railway line east from Karoonda covering the gap between the Pinnaroo and Brown's Well lines, opened 18 December 1914, closed 7 December 1990.[12]

The government expected these lines to not recover the cost in the short term, but to open up land for farming wheat to "strengthen the backbone of South Australia".[11] They were built using second-hand rails, and were the first in the state to use steel sleepers.[11]

Later, the Moorook railway line was opened from Wanbi to Yinkanie (near Moorook) in September 1925,[14] but closed in 1971.[15] In 1928 the line was opened from Paringa to Renmark and Barmera; it closed in 1990.[citation needed]

The last of these lines was the Loxton railway line which was converted to standard gauge in 1998. It closed with the transfer of the grain traffic to road after July 2015. Viterra announced that no more grain would be carried by rail in the region after 31 July 2015, with the 2015 harvest to be entirely transported by road.[9]

Southern narrow gauge lines

[edit]
South Australian Railways V class locomotive no. 9 commenced service on the narrow-gauge Kingston–Naracoorte railway in 1877. It was transferred to the Northern Division of the SAR in 1888 and was not retired until 1953.

In 1876 a 1067 mm (3 ft 6 in) narrow-gauge line known as the Kingston-Naracoorte railway line was built from Kingston SE to Naracoorte. In 1879, a railway was built between Beachport, Millicent and Mount Gambier. In 1887 they were linked by a line from Mount Gambier to Naracoorte and Wolseley on the broad gauge Melbourne–Adelaide railway, creating a break-of-gauge junction at Wolseley. It later had a branch line added from Wandilo to Glencoe.[16]

The Mount Gambier-Heywood railway line, a broad gauge line, was opened between Mount Gambier and Heywood near Portland in 1917. From 1953 to 1956, the southeastern lines were converted to broad gauge, with the exception of the Beachport – Millicent and the Wandilo – Glencoe line, which were closed down in 1957. The Kingston – Naracoorte was closed on 28 November 1987. The other southeastern lines, including the line to Heywood, have been out of use since the standardisation of the Adelaide – Melbourne and Maroona – Portland lines on 12 April 1995. There are regular calls for their standardisation.

Northern lines

[edit]

Broad gauge lines

[edit]

In 1857 the 42 km (26 mi) Gawler line was built to Gawler station, which was rural at the time, and extended to Roseworthy, Kapunda in 1860. The main line left the Kapunda branch at Roseworthy and proceeded to Hamley Bridge, Riverton, Burra in 1870. The Kapunda branch was extended to Morgan in 1878. The Burra line was extended to Terowie in 1880.

The Barossa Valley railway line was built from Gawler Junction, north of Gawler station, through what is now Gawler Central station, to Nuriootpa and Angaston in the Barossa Valley in 1911. A further branch was constructed from Nuriootpa to Stockwell and Truro. The Penrice branch to the quarry from near Stockwell was the last destination to operate beyond Gawler Central.

A branch line was built from Riverton to Clare in 1919 and Spalding in 1922.[17] This line was lifted in the early 80s and parts of it have been restored as the Rattler Trail (Riverton to Auburn) and Riesling Trail (Auburn to Clare), a bicycle and walking trail through the Clare Valley.

In 1925, a broad gauge line was built from Salisbury to Redhill and in 1937, it was extended to Port Pirie to meet the extension of the standard gauge from Port Augusta. This line was converted to standard gauge in 1982, including a deviation at the northern end to move the rail junction from Port Pirie to Crystal Brook.

Western Division narrow gauge lines

[edit]

The lines in the Mid North (generally north of Goyder's Line, which is the limit of 250 millimetres (9.8 inches) annual rainfall) were built to narrow gauge.

Upper Yorke Peninsula lines

[edit]
Broad-gauge tracks at the defunct Wallaroo railway station

The first narrow gauge line ran from Port Wakefield to Hoyleton, opened in 1870 and branched from Balaklava to Hamley Bridge in 1878, creating Australia's first break-of-gauge on the government railways.[18]

A horse-drawn tramway was built by the Kadina and Wallaroo Railway and Pier Company between Wallaroo and Kadina in 1862 and extended to Moonta in 1866. This was acquired by the South Australian Railways in 1877 and a new narrow gauge line was built along its route and connected to Port Wakefield in about 1878. A line was built from Brinkworth to Snowtown, Bute and Kadina in 1879. These lines were converted to broad gauge in 1927.[19] All the lines west of the AdelaideCrystal Brook standard gauge line and the line from Snowtown to Brinkworth were closed after the Adelaide – Crystal Brook line was opened in 1982, despite proposals to convert some of them to standard gauge.

There are calls to convert the Wolseley to Mount Gambier line to standard gauge. This partly reflects the lifting of restriction on the road transportation of grain Australia-wide that followed recommendations of the 1986-88 Royal Commission into grain storage, handling and transport. This particularly affected South Australian railways because of the short distances between the growing areas and its various wheat exporting ports. The Snowtown to Wallaroo Broad Gauge was converted to Dual Gauge (Standard/Broad) during the late 1980s.

North Mount Lofty Ranges lines

[edit]

A line was built from Balaklava to Brinkworth and Gladstone by 1880 and later extended to Wilmington. The Hamley Bridge – Balaklava – Brinkworth – Gladstone line was converted to broad gauge in 1927, making Gladstone a break-of-gauge junction. In 1969, when the line from Port Pirie to Broken Hill was converted to standard gauge, Gladstone became a three-gauge break-of-gauge junction (together with Peterborough and succeeding Port Pirie, which had been reduced to two gauges). In the 1980s, the broad gauge line north of Balaklava and the narrow gauge line were closed, leaving Gladstone as a purely standard gauge station.

A narrow-gauge line was built from Terowie to Peterborough in 1881. It was during a change of train at the Terowie break-of-gauge station in 1942 that General Douglas MacArthur uttered his famous remark, "I came through and I shall return". The break of gauge was not overcome until 1970, when the Terowie–Peterborough line was converted to 1600 mm (5 ft 3 in) broad gauge to meet new the standard gauge from Port Pirie to Broken Hill. It was abandoned by 1988.

The narrow-gauge line was extended to Orroroo also in 1881 and Quorn in 1882, connecting with the new line from Port Augusta. This line has now been abandoned.

A narrow gauge railway was built from Port Pirie to Gladstone, Peterborough and Broken Hill, in 1888 to serve the Broken Hill silver and lead mine, which was becoming the largest and richest of its kind in the world. Since the New South Wales Government would not allow the South Australia railway to cross the border, the last 30 km (19 mi) was built by a private company as a tramway, the Silverton Tramway from Cockburn to Silverton and Broken Hill. In 1970 the line was converted to standard gauge, completing the transcontinental line from Sydney to Perth.[20]

The Great Northern Railway

[edit]

The Great Northern Railway was completed from Port Augusta across the Pichi Richi Pass to Quorn in 1879, Hergott Springs (now known as Marree) in 1883 and Oodnadatta in 1891. It was extended to Alice Springs by the Commonwealth Railways in 1929, when it was renamed the Central Australia Railway.

In 1957, the new standard gauge line was built from Stirling North (near Port Augusta) to Marree on a new alignment west of the Flinders Ranges and the narrow gauge line between Hawker and Marree was abandoned. The remainder of the narrow gauge line between Stirling North, Quorn and Hawker was abandoned in 1972, although the Stirling North – Quorn section has been taken over by the Pichi Richi tourist railway (with a more recent extension into the town of Port Augusta completed in 2001).[21] The narrow gauge line from Marree to Alice Springs was abandoned with the opening of the new standard gauge railway from Tarcoola to Alice Springs in 1980. The standard gauge line from Stirling North has since been abandoned north of the Leigh Creek Coalfield.

Eyre Peninsula lines

[edit]

The isolated SAR Port Lincoln Division was built to 1067 mm (3 ft 6 in) narrow gauge, all of it lightly built since its purpose was to promote agricultural development of the area. Construction started with a railway between Port Lincoln and Cummins, opened in 1907. The network grew until 1950, when its length was 767 kilometres (477 miles).[22]: 57  It was vitally important in its early days since roads were few and unmade; communities throughout the Eyre Peninsula relied totally on the SAR for transport of their produce to port, supplies for their everyday needs, and passenger transport. As roads improved, however, "roadside goods" traffic declined, usually to one train a week, and passenger services ceased in 1968.[22]: 145 [23] Meanwhile, from the mid-1960s, a transition took place from bagged grain traffic in open wagons to bulk grain hopper wagons in point-to-point unit trains, vastly improving efficiency.[22]: 114  The system ended in 2019 when grain distributor Viterra moved to road haulage.[24] As of 2023, the only remaining operational part of the original Port Lincoln Division was the 65 kilometres (40 miles) long Lake Macdonnell–Thevenard railway, on which Aurizon ran three gypsum unit trains a day.

The steel industry company, BHP, developed two separate systems on the peninsula. The so-called BHP Whyalla Tramway, a 112 kilometres (70 miles) long 1067 mm (3 ft 6 in) heavy-haul iron ore line from the Middleback Range to the Whyalla Steelworks, opened in 1901 and is still operational.[25] The Coffin Bay Tramway, also a heavy-haul line but built to 1435 mm (4 ft 8+12 in), opened in 1966 and closed in 1989. It conveyed mineral sand 39 km (24 mi) from Coffin Bay to Proper Bay on the outskirts of Port Lincoln.[22]: 349 

Northern Territory railway

[edit]
An NSU class diesel locomotive, mainstay of the Central Australia Railway and the North Australia Railway since the 1950s, on display at the Adelaide River Rail Heritage Precinct

The Northern Territory was part of South Australia from 1863 to 1911, when it was transferred to Commonwealth control.

The Palmerston and Pine Creek Railway was a narrow gauge 1067 mm (3 ft 6 in) railway that ran from Darwin, once known as Palmerston, to Pine Creek.

The John Cox Bray Government in South Australia introduced the Palmerston and Pine Creek Railway Bill in 1883. The £959,300 contract went to C & E Millar of Melbourne on the proviso that they could use Asian labourers. The line reached Pine Creek in 1888 and was officially opened on 30 September 1889. Singhalese and Indian gangs did the grubbing and earthwork and 3000 Chinese labourers laid more than 1 kilometre (0.6 miles) of track per day. A total of 310 bridges and flood openings were built.

The Commonwealth Government took over the line in 1911 and renamed it the Northern Territory Railway. The line was extended to Katherine in 1917. Further extensions in the 1920s saw it eventually reach Birdum, just south of Larrimah, in 1929, when it was further renamed the North Australia Railway, to distinguish it from the Central Australia Railway, which reached Alice Springs from the south in the same year.

Although a railway line from Alice Springs to Darwin had been discussed for many years, the North Australia Railway was closed in 1976. However eventually the standard gauge Adelaide to Darwin Railway was finally completed on 17 September 2003 with the line between Alice Springs and Darwin. The first freight train reached Darwin on 17 January 2004.

List of country railways in South Australia

[edit]

Mid North

[edit]

Branches from the Melbourne line

[edit]

North

[edit]

Eyre Peninsula

[edit]

Aurizon owns the Eyre Peninsula Railway lines

Aurizon manages the BHP Whyalla Tramway

BHP owned the Coffin Bay Tramway

  • Proper Bay (near Port Lincoln) to Coffin Bay to carry lime sand between 1960 and 1989[30]

See also

[edit]

References

[edit]
  1. ^ Urban Exploration – The Penrice Soda Factory
  2. ^ Interactive Maps of Railways and Colonisation in South Australia
  3. ^ "Proceedings of the Legislative Council". The South Australian. Adelaide: National Library of Australia. 8 October 1847. p. 3. Retrieved 20 May 2013.
  4. ^ Wilson, John (2024). The Break-of-gauge: a social history. Banksia Park, South Australia: Sarlines Railway Books. ISBN 9780645621938.
  5. ^ Vincent, Graham (2013). "South Australia's mixed gauge muddle" (PDF). National Railway Museum (South Australia). National Railway Museum, Port Adelaide. Archived from the original (PDF) on 28 February 2016. Retrieved 27 March 2023.
  6. ^ "Complications". The South Australian Advertiser. Adelaide: National Library of Australia. 10 October 1874. p. 4. Retrieved 27 July 2014.
  7. ^ "The Advertiser". The South Australian Advertiser. Adelaide: National Library of Australia. 2 October 1874. p. 2. Retrieved 27 July 2014.
  8. ^ "Mount Gambier and Rivoli Bay railway". South Australian Register. Adelaide, SA: National Library of Australia. 20 May 1879. p. 6. Retrieved 2 August 2015.
  9. ^ a b c Strathearn, Peri (21 May 2015). "End of line for Murraylands, Mallee grain trains". The Murray Valley Standard. Fairfax Regional Media. Archived from the original on 29 September 2015. Retrieved 4 August 2015.
  10. ^ Brown's Well Line, 1913, retrieved 27 June 2014
  11. ^ a b c "Railway extension". The Register. Adelaide: National Library of Australia. 21 December 1912. p. 7. Retrieved 27 June 2014.
  12. ^ a b c Bromby, Robin (2006). Ghost Railways of Australia. Sydney: Lothan Books. p. 232. ISBN 0-7344-0923-0.pp74-75
  13. ^ a b c "Plan of Murray Lands railways [map]". South Australia Railways Department. 1913. Archived from the original on 3 March 2016. Retrieved 27 June 2014.
  14. ^ "The Moorook railway". The Chronicle. Adelaide: National Library of Australia. 12 September 1925. p. 52. Retrieved 27 June 2014.
  15. ^ 'The Yinkanie Line'. Milne, Rod Australian Railway Historical Society Bulletin, December 2002 pp443-448
  16. ^ A Pastoral Railway – Narrow Gauge Railways in the South-East of South Australia. Callaghan, W.H. Australian Railway History, August to December 2004. pp302-315;331-339;376-387;424-432;463-466 January to March 2005 pp15-26;68-77;83-103.
  17. ^ "The Riesling Trail". The Wilson Vineyard www.wilsonvineyard.com.au. Archived from the original on 20 August 2006. Retrieved 27 April 2006.
  18. ^ "Linking a Nation". Australian Heritage Commission www.ahc.gov.au. Archived from the original on 22 June 2006. Retrieved 27 April 2006.
  19. ^ "Lions Club of Yorke Peninsula Rail". Lions Club of Yorke Peninsula Rail www.ypr.org.au. Archived from the original on 22 February 2006. Retrieved 27 April 2006.
  20. ^ "A History of Rail in South Australia". National Railway Museum Port Adelaide. Archived from the original on 21 February 2008. Retrieved 5 March 2008.
  21. ^ "Official Opening of Port Augusta Extension". Pichi Richi Railway Preservation Society Inc. Archived from the original on 14 September 2009. Retrieved 23 August 2015.
  22. ^ a b c d Knife, Peter (2013). Peninsula Pioneer revisited. Port Lincoln: Peter Knife. ISBN 9780975783535.
  23. ^ Buckland, John L. (May 1979). "The railways of South Australia's west coast". Australian Railway Historical Society Bulletin. XXX (499). Australian Railway Historical Society, New South Wales Division: 100. ISSN 0005-0105.
  24. ^ "Eyre Peninsula rail to close as agreement ends". Port Lincoln Times. 26 February 2019. Archived from the original on 22 March 2019.
  25. ^ Griffiths, David (1985). BHP Tramways Centenary History. Cowandilla: Mile End Railway Museum. p. 11. ISBN 0959507345.
  26. ^ "Penrice stoney and SBR iron trains cease" Railway Digest August 2014 page 19
  27. ^ Monarto to Sedan Railway Adelaide Advertiser 11 October 1919
  28. ^ Sedan Archived 2 April 2015 at the Wayback Machine South Australian History
  29. ^ Port Augusta track extension project Pichi Richi Railway
  30. ^ See this website for more information Archived 30 October 2007 at the Wayback Machine

Further reading

[edit]
  • Andrews F.B. 'The Salisbury munitions tramways' In Light railways. p.187. February 2006.
  • Anon. The bay line. State Transport Authority. Adelaide. 1979.
  • Callaghan W.H. The Overland Railway. Australian Railway Historical Society NSW Div. St James. 1992.
  • Callaghan W.H. 'Railways Rather than Roads'. Australian Railway History. September 2006 et seq.
  • Castle B.J. 'The Balhannah–Mount Pleasant branch line'. Australian Railway Historical Society Bulletin p.316. February 1964.
  • Collins N. The jetties of South Australia. Privately published. Woodside. 2005.
  • Evans, John 'The uniform gauge question: a South Australian perspective'. Australian Railway History. Vol.65 no.918. April 2014.
  • Fluck R.E., Sampson R. and Bird K.J. Steam locomotives and railcars of the South Australian Railways. Mile End Railway Museum. Roseworthy. 1986.
  • Jennings R. Line clear: 100 years of train working Adelaide-Serviceton. Mile End Railway Museum. Roseworthy. 1986.
  • Lockyer A. 'Jetty and wharf tramways of South Australia'. In Light railways. p.142. August 1998.
  • Mack D. Little coastal railways of the Adelaide plains. Privately published. Camden Park. 1986.
  • McNicol S. SAR railcars. Railmac. Elizabeth. 1989.
  • Pantlin G. and Sargent J. (eds). Railway stations in greater metropolitan Adelaide. Train Hobby Publications. Melbourne. 2005.
  • Richardson J.(ed) Along the line no. 2. Traction Publications. Canberra. 1964.
  • Richardson J.(ed) Along the line in South Australia. Traction Publications. Canberra. 1964.
  • Sampson R. Rails round Adelaide. Mile End Railway Museum. Walkerville. 1978.
  • Thompson M.H. 'The Goodwood–Brighton–Willunga line'. Australian Railway Historical Society Bulletin. p.336. October 1965.
  • Wheaton R.T. Rails to the bay. Australian Electric Traction Assoc. Sydney. 1971.
[edit]

Maps:

pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy