I wanted to store my filaments in individual containers where I could see them outside of the box/bag. But I would keep the box around because it had all the information, I may need to select the right filament for the print or to reorder the same exact color filament.Some information I wanted to keep included filament type, brand, color, SKU, HEX colors, print temperatures, print profiles, etc. I designed an all-in-one solution to beautifully display my filament, including the filament inf

/r/3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed...

This is a filament spool holder specifically designed for E-Sun 3D filament!2x Arms2x HooksPrint the four pieces horizontally and snap the two arms in

Filament Spool Shelf: I've only had a 3D printer since the spring of 2018. Over the past 5 years I have burned through quite a few spools of filament. For instance I recently ordered a spool of white filament from Amazon and was informed that I had already purchased this…

Learn how to store 3d printing filament the right way and also explore tips for making filament storage simpler and more effective.

Remix info:The original design did not fit in my stacked lack table setup and the design did not fit on my Bambulab P1P printbed, so i had to redesign the whole thing.I made it a total 38mm less wide en 4mm less high (i wanted it to be square).Because of this width difference the rails had to be lowered for there to be enough clearance.this also had a great effect on the position of the pvc pipes and the force put on the faceplate when pulling on the drawers.front and backplates are also…

3D Filament Storage Box (in an IKEA SAMLA Box): 3D printing is amazing - it gives you so many possibilities to play with. And if you're like me, you've got multiple rolls of filament to try out different colors and materials. However, 3D filament is hygroscopic - meaning it will absorb moisture…

This is the container for my filament samples shaped as mini-floppydisks that you can find here: https://www.printables.com/it/model/862027-floppydisk-filament-sampleI 3D printed the Storage Box with 0.12 layer height but 0.20 still works fine. No supports needed. I 3D printed the lid in vertical position as my 3D printer can handle that bridge on the nose, but you can also 3D print it in horizontal position with the hinges facing up.The Storage Box mimics the old floppydisk containers of…

Uncover the truth about leaving filament in your 3D printer! Dive into our fascinating blog post to understand the effects of storing filament in your printer, potential challenges that could surface, and effective preventive measures. Gain valuable insights from our experts on optimizing your 3D printer's performance and extending its lifespan. Don't miss out - click through to explore further!

As a lover of 3D printing, I of course, have a ton of filament for use with my Formbot T-Rex 2+. For reasons unknown to me, my office at home had a closet with a desk and power built into it. So way back when we got our MakerBot in 2013 it was quickly decided that it would be a great place for the printer. I’ve done a number of improvements over the years like sealing up the doors to make the whole thing a heated chamber (this works especially well with the Formbot’s 800W heated bed) and…