Skip to content

Drivetech/cellocator-parser

Repository files navigation

cellocator-parser

npm version npm downloads Build Status Coverage Status Maintainability dependency Status devDependency Status

Parse raw data from cellocator devices

Installation

npm i -S @drivetech/cellocator-parser

Use

Try on Tonic

const cellocator = require('@drivetech/cellocator-parser');

const raw = new Buffer('4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1', 'hex');
const data = cellocator.parse(raw);
/*{
  raw: '4d43475000bdda0b0000060ddf20041017002000e3c40000baeff3c6b6224502000000000000ea65000402090daec5f7cb302cff3357000038090000930a002a170c03e007c1',
  unitId: 776893,
  imei: 0,
  manufacturer: 'cellocator',
  device: 'CelloTrack',
  alarm: {type: 'ConnectionUp'},
  type: 'data',
  loc: {
    type: 'Point',
    coordinates: [ -79.09097658351084, -7.953307941260071 ]
  },
  speed: 84.96,
  datetime: '2016-03-12T23:42:00.000Z',
  gpsTime: '2016-07-12T23:42:00.000Z',
  direction: 155.09967514191385,
  satellites: 9,
  voltage: {
    ada: 28.1176470588165,
    adb: 4.00235293989,
    adc: 45.41720000000001,
    add: 182
  },
  altitude: 223.23000000000002,
  status: {
    sos: false,
    input: {
      '1': false,
      '2': false,
      '3': false,
      '4': false,
      '5': true
    },
    output: {
      '1': false,
      '2': false,
      '3': false,
      '4': false,
      '5': false,
      '6': false
    },
    charge: false,
    engine: false,
    driving: false,
    accelerometer: true,
    gpsPower: false
  },
  communication: {
    noHibernation: false,
    momentarySpeed: false,
    privateMode: false,
    firmwareSubversion: '0011',
    canOriginatedOdometer: false,
    canOriginatedSpeed: false,
    dataType33_38: '0',
    messageSource: '0',
    garminConnected: false,
    garminEnable: false,
    messageInitiative: false
  },
  locationStatus: {
    GNSSAntennaSelected: 'internal',
    trailer: false,
    CFEType: 'Not Applicable'
  },
  hardware: {
    id: 31,
    model: 'Cello-IQ',
    modem: 'Telit GE864, automative'
  },
  software: 32,
  protocol: 4,
  transmissionReason: 32,
  transmissionReasonSpecificData: 0,
  odometer: 148770,
  gpsModes: {
    '1': {
      pMode: '>3 satellite solution',
      tpMode: 'Full power position',
      altMode: 'No altitude hold',
      dopMask: 'DOP mask not exceeded',
      dgps: 'No DGPS position'
    },
    '2': 'Validated'
  },
  plmn: 71610,
  serialId: 13,
  messageType: 0,
  valid: true
}*/

const data = {
  unitId: 836522,
  commandNumerator: 1,
  instruction: '1_on' // enable output 1 => port + _ + on/off
};
const command = cellocator.parseCommand(data);
// new Buffer('4d43475000aac30c0001000000000003000300140014000000000000a8', 'hex')

License

MIT

pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy