Skip to content

OpenIPC/sandbox-fpv

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

sandbox-fpv

Sandbox for FPV experiments. Telegram-group: https://t.me/+BMyMoolVOpkzNWUy | link

News

  • 26.07.2023 - FPV link setup via 4G modem .

  • 01.07.2023 - A short note about the imx335 gk7205v300 camera . About baud for telemetry .

  • 22.06.2023 - Finally, the problem with the picture being jerky at 30fps was resolved .

  • 06.04.2023 - Added coupler firmware for ivg-g2s with u-boot on board.

  • 05.04.2023 - Added functionality to rcjoystick for displaying packet losses (link quality) in rssi.

  • 04.04.2023 - OpenIPC has added the majestic streamer, now the ivg-g2s camera runs h265 cbr (constant bitrate). This gave a cleaner picture and a significant reduction in noise. At the same time, changes were made to the link launch process. The main service is now S98datalinkwith the config /etc/datalink.conf, and wfb is now launched via /usr/bin/wifibroadcast. The articles have been corrected to accommodate this innovation.

  • 01.04.2023 - Due to certain circumstances, wfb-ng was replaced in my camera and recorder with an alternative from OpenHD . Here is the package for assembly in buildroot OpenIPC. The shell wrappers take into account both options, due to the presence of a parameter link_idthat is not required in the OpenHD implementation. Archive with binaries of both options.

Notes

Miscellaneous

Road map

  • Starting video with transfer from the recorder to the PC.
  • Launch one- and two-way telemetry.
  • Starting video transfer via usb tethering to an Android tablet.
  • Building and testing LTE firmware on e3372h + zerotier
  • Starting telemetry routing via mavlink-router.
  • Finding ways to control the camera through mavlink..
  • Finding ways to output video and osd via hdmi.
  • Development of expansion board for camera: bec 5v/3.3v; usb hub, uart, wifi/modem power transistor, microSD.
  • Development of a zoom lens control board and a method for controlling commercially available boards.
  • Development of a stabilizing gimbal controlled from the ground via wfb-ng.

Russians:

Новое

  • 26.07.2023 - Настройка FPV-линка через 4G модем.

  • 01.07.2023 - Короткая заметка о камере imx335 gk7205v300. О baud для телеметрии.

  • 22.06.2023 - Наконец решилась проблема с дерганностью картинки на 30fps.

  • 06.04.2023 - Добавлена прошивка coupler для ivg-g2s с u-boot на борту.

  • 05.04.2023 - В rcjoystick добавлен функционал для целей отображения потерь пакетов (качества линка) в rssi.

  • 04.04.2023 - В OpenIPC "допилили" стример majestic, теперь на камере ivg-g2s работает h265 cbr (постоянный битрейт). Это дало более чистую картинку и значительное уменьшение шума. Вместе с этим были внесены изменения в процесс запуска линка. Основным сервисом теперь является S98datalink с конфигом /etc/datalink.conf, а запуск wfb теперь производится через /usr/bin/wifibroadcast. Статьи были исправлены под это нововведение.

  • 01.04.2023 - В связи с некоторыми обстоятельствами, wfb-ng был заменен в моих камере и регистраторе на альтернативу от OpenHD. Тут пакет для сборки в buildroot OpenIPC. В шелл-обертках учтены оба варианта, по наличию параметра link_id который не требуется в реализации от OpenHD. Архив с бинарниками обоих вариантов.

Заметки

Разное

Дорожная карта

  • Запуск видео с передачей с регистратора на пк.
  • Запуск одно-и двусторонней телеметрии.
  • Запуск передачи видео через usb tethering на android-планшет.
  • Сборка и тестирование прошивки LTE на e3372h + zerotier
  • Запуск маршрутизации телеметрии через mavlink-router.
  • Поиск путей управления камерой сквозь mavlink.
  • Поиск способов вывода видео и osd через hdmi.
  • Разработка платы расширения для камеры: bec 5v/3.3v; usb hub, uart, транзистор питания wifi/modem, microSD.
  • Разработка платы управления зум-объективом и способа управления имеющимися в продаже платами.
  • Разработка стабилизирующего подвеса, управляемого с земли сквозь wfb-ng.

About

Sandbox for FPV experiments

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Sponsor this project

Contributors 5

Languages

pFad - Phonifier reborn

Pfad - The Proxy pFad of © 2024 Garber Painting. All rights reserved.

Note: This service is not intended for secure transactions such as banking, social media, email, or purchasing. Use at your own risk. We assume no liability whatsoever for broken pages.


Alternative Proxies:

Alternative Proxy

pFad Proxy

pFad v3 Proxy

pFad v4 Proxy