OpenSCAD library of various objects to use in Raspberry Pi-based projects
This is a simple library of objects that I designed to assist myself in creating various projects based on the Raspberry Pi. The main goal is to have a realistic representation of the size of the overall assemble, to aid in building a suitable case for the projects. I used the same OpenSCAD software to design 3D-printed or laser-cut cases.
One of the first goal where I used this library, was to design a case for a little Media Hub, based on the Raspberry Pi. The case is designed to be made of Medium-density fibreboard (MDF) with laser cutting.
See the img/README.md file for a gallery of snapshot images.
- Raspberry Pi Model B v.2
- Raspberry Pi Model A+ rev.1.1
- Raspberry Pi 3 Model B v.1.2
- 1602A LCD panel 16x2 characters
- SainSmart Two-relays module
- Keyes Two-relays module
- PCD8544 LCD module, blue PCB, pins below
- PCD8544 LCD module, red PCB, pins above
- GPS u-blox NEO-6
- GYBMEP: BME280 pressure, humidity and temperature sensor
- GY-521: MPU-6050 Accelerometer and Gyroscope
- GY-273: QMC5883L 3-Axis Magnetic Sensor
- X835 SupTronics 3.5 SATA HDD shield for the Raspberry Pi
- Coaxial power plug 5.0 mm
- Coaxial power plug socket, with 2.1 mm pin
- Mini push button
- Metal momentary push switch 8 mm
- Matrix of 2.54 mm dupont female connectors
- Matrix of 2.54 mm female connectors
- Matrix of 2.54 mm pins
- Pin header, 2.54 mm, right angle, low profile
- Pin header, 2.54 mm, right angle, high profile
- USB male Type-A connector
- USB male Micro-B connector
- USB external hard disk 2.5" (Toshiba)
- SATA 3.5 inches hard disk
- UBS 2.0 hub 7 ports, Amazon Basics
- UBS 3.0 hub 4 ports, Amazon Basics (WARNING: does not work with the Raspberry Pi, VIA Labs chip, USB ID 2109:2811)
- UGREEN USB Audio Adapter
- Nano WiFi USB dongle by Edimax